183130227
/
tn3399_openwrt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ipq40xx: utilize nvmem-cells for openmesh,a42 

The calibration data and mac addresses on this device are stored in the
0:ART partition. It is therefore possible to move the code to handle them
directly to the devicetree instead of the various scripts.

But the actual relevant information about the partition layout is provided
by the bootloader via bootargs (mtdparts) and not via the devicetree
itself. Instead of using a fixed-partition template, the mtd dynamic
partitions support from the upstream kernel is used.

Reported-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
This commit is contained in:
Sven Eckelmann 2022-10-25 09:12:16 +02:00 committed by Hauke Mehrtens
parent c6bef1b83a
commit 2b2f14c959
4 changed files with 38 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/ipq40xx/base-files/etc/board.d/02_network
View File

@ -163,7 +163,6 @@ ipq40xx_setup_macs()
pakedge,wr-1)
wan_mac=$(macaddr_add $(get_mac_label) 1)
;;
openmesh,a42|\
openmesh,a62)
label_mac="$(mtd_get_mac_binary "0:ART" 0x0)"
;;

2
target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -77,7 +77,6 @@ case "$FIRMWARE" in
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;
cellc,rtl30vw |\
openmesh,a42 |\
openmesh,a62 |\
plasmacloud,pa1200 |\
plasmacloud,pa2200)
@ -174,7 +173,6 @@ case "$FIRMWARE" in
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;
cellc,rtl30vw |\
openmesh,a42 |\
openmesh,a62 |\
plasmacloud,pa1200 |\
plasmacloud,pa2200)

1
target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
View File

@ -29,7 +29,6 @@ preinit_set_mac_address() {
ip link set dev lan1 address $(macaddr_add "$base_mac" 1)
ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7)
;;
openmesh,a42|\
openmesh,a62)
ip link set dev ethernet1 address $(mtd_get_mac_binary "0:ART" 0x0)
ip link set dev ethernet2 address $(mtd_get_mac_binary "0:ART" 0x6)

38
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
View File

@ -71,6 +71,7 @@
led-failsafe = &led_status_green;
led-running = &led_status_green;
led-upgrade = &led_status_green;
label-mac-device = &swport5;
};
leds {
@ -144,7 +145,32 @@
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
/* partitions are passed via bootloader */
partitions {
partition-art {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
label = "0:ART";
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
macaddr_gmac0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_gmac1: macaddr@6 {
reg = <0x6 0x6>;
};
};
};
};
};
@ -177,19 +203,31 @@
&swport4 {
status = "okay";
label = "ethernet2";
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_gmac1>;
};
&swport5 {
status = "okay";
label = "ethernet1";
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_gmac0>;
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "OM-A42";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "OM-A42";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
};