183130227
/
tn3399_openwrt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ipq40xx: add support for Mikrotik wAP R ac / LTE / LTE6 

The Mikrotik wAP R AC is an outdoor, dual band, dual radio (802.11ac) AP
with a miniPCIe slot for a LTE modem.
The wAP R AC is similar to the wAP AC but with the miniPCIe slot.
The wAP R AC requires installing a LTE modem.
The wAP LTE and wAP LTE6 comes with a LTE modem installed.

See https://mikrotik.com/product/wap_r_ac for more info.

Specifications:
- SoC: Qualcomm Atheros IPQ4018
- CPU: 4x ARM Cortex A7
- RAM: 128MB
- Storage: 16MB NOR flash
- Wireless:
   - Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, internal antenna
   - Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, internal antenna
- Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 2x 1000/100/10 ports
  one with 802.3af/at PoE in
- 1x Mini PCI-E port (USB2)

Installation:
Boot the initramfs image via TFTP, then flash the sysupgrade image using
sysupgrade. Details at https://openwrt.org/toh/mikrotik/common.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
This commit is contained in:
Alexander Couzens 2022-11-12 12:13:46 +00:00
parent bb2fb4f16a
commit d4c460648d
No known key found for this signature in database
GPG Key ID: 33D274667C49F55D
9 changed files with 347 additions and 217 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
target/linux/ipq40xx/base-files/etc/board.d/02_network
View File

@ -64,7 +64,9 @@ ipq40xx_setup_interfaces()
mobipromo,cm520-79f)
ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
;;
mikrotik,wap-ac)
mikrotik,wap-ac|\
mikrotik,wap-ac-lte|\
mikrotik,wap-r-ac)
ucidef_set_interface_lan "sw-eth1 sw-eth2"
;;
netgear,rbr50|\

16
target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -113,7 +113,9 @@ case "$FIRMWARE" in
mikrotik,hap-ac2 |\
mikrotik,hap-ac3 |\
mikrotik,hap-ac3-lte6-kit |\
mikrotik,wap-ac)
mikrotik,wap-ac |\
mikrotik,wap-ac-lte |\
mikrotik,wap-r-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
@ -207,7 +209,9 @@ case "$FIRMWARE" in
mikrotik,hap-ac3 |\
mikrotik,hap-ac3-lte6-kit |\
mikrotik,sxtsq-5-ac |\
mikrotik,wap-ac)
mikrotik,wap-ac |\
mikrotik,wap-ac-lte |\
mikrotik,wap-r-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
@ -243,7 +247,9 @@ case "$FIRMWARE" in
mikrotik,hap-ac2 |\
mikrotik,hap-ac3 |\
mikrotik,hap-ac3-lte6-kit |\
mikrotik,wap-ac)
mikrotik,wap-ac |\
mikrotik,wap-ac-lte |\
mikrotik,wap-r-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
@ -257,7 +263,9 @@ case "$FIRMWARE" in
mikrotik,hap-ac3 |\
mikrotik,hap-ac3-lte6-kit |\
mikrotik,sxtsq-5-ac |\
mikrotik,wap-ac)
mikrotik,wap-ac |\
mikrotik,wap-ac-lte |\
mikrotik,wap-r-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )

4
target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
View File

@ -29,7 +29,9 @@ preinit_set_mac_address() {
ip link set dev lan1 address $(macaddr_add "$base_mac" 1)
ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7)
;;
mikrotik,wap-ac)
mikrotik,wap-ac|\
mikrotik,wap-ac-lte|\
mikrotik,wap-r-ac)
base_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
ip link set dev sw-eth1 address "$base_mac"
ip link set dev sw-eth2 address $(macaddr_add "$base_mac" 1)

4
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
View File

@ -177,7 +177,9 @@ platform_do_upgrade() {
mikrotik,hap-ac3-lte6-kit|\
mikrotik,lhgg-60ad|\
mikrotik,sxtsq-5-ac|\
mikrotik,wap-ac)
mikrotik,wap-ac|\
mikrotik,wap-ac-lte|\
mikrotik,wap-r-ac)
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
default_do_upgrade "$1"
;;

45
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac-lte.dts Normal file
View File

@ -0,0 +1,45 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2022, Alexander Couzens <lynxis@fe80.eu> */
#include "qcom-ipq4018-wap-ac.dtsi"
/ {
model = "MikroTik wAP ac LTE";
compatible = "mikrotik,wap-ac-lte";
soc {
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
phys = <&usb3_hs_phy>;
phy-names = "usb2-phy";
};
};
};
};
&tlmm {
enable-usb-power {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "enable USB power";
};
};
&usb3_hs_phy {
status = "okay";
};
&usb3 {
status = "okay";
};

211
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts
View File

@ -1,218 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
#include "qcom-ipq4018-wap-ac.dtsi"
/ {
model = "MikroTik wAP ac";
compatible = "mikrotik,wap-ac";
memory {
device_type = "memory";
reg = <0x80000000 0x08000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
led-boot = &led_user;
led-failsafe = &led_user;
led-running = &led_user;
led-upgrade = &led_user;
};
soc {
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
power {
label = "blue:power";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
led_user: user {
label = "green:user";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
};
};
&prng {
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <2>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Qualcomm";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
label = "RouterBoot";
reg = <0x80000 0x80000>;
hard_config {
read-only;
size = <0x2000>;
};
dtb_config {
read-only;
};
soft_config {
};
};
partition@100000 {
compatible = "mikrotik,minor";
label = "firmware";
reg = <0x100000 0xf00000>;
};
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&crypto {
status = "okay";
};
&watchdog {
status = "okay";
};
&mdio {
status = "okay";
};
&gmac {
status = "okay";
};
&switch {
status = "okay";
};
&swport4 {
status = "okay";
label = "sw-eth2";
};
&swport5 {
status = "okay";
label = "sw-eth1";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "MikroTik-wAP-ac";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "MikroTik-wAP-ac";
};

215
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dtsi Normal file
View File

@ -0,0 +1,215 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
memory {
device_type = "memory";
reg = <0x80000000 0x08000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
led-boot = &led_user;
led-failsafe = &led_user;
led-running = &led_user;
led-upgrade = &led_user;
};
soc {
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
power {
label = "blue:power";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
led_user: user {
label = "green:user";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
};
};
&prng {
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <2>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Qualcomm";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
label = "RouterBoot";
reg = <0x80000 0x80000>;
hard_config {
read-only;
size = <0x2000>;
};
dtb_config {
read-only;
};
soft_config {
};
};
partition@100000 {
compatible = "mikrotik,minor";
label = "firmware";
reg = <0x100000 0xf00000>;
};
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&crypto {
status = "okay";
};
&watchdog {
status = "okay";
};
&mdio {
status = "okay";
};
&gmac {
status = "okay";
};
&switch {
status = "okay";
};
&swport4 {
status = "okay";
label = "sw-eth2";
};
&swport5 {
status = "okay";
label = "sw-eth1";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "MikroTik-wAP-ac";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "MikroTik-wAP-ac";
};

45
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wap-r-ac.dts Normal file
View File

@ -0,0 +1,45 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2022, Alexander Couzens <lynxis@fe80.eu> */
#include "qcom-ipq4018-wap-ac.dtsi"
/ {
model = "MikroTik wAP R ac";
compatible = "mikrotik,wap-r-ac";
soc {
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
phys = <&usb3_hs_phy>;
phy-names = "usb2-phy";
};
};
};
};
&tlmm {
enable-usb-power {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "enable USB power";
};
};
&usb3_hs_phy {
status = "okay";
};
&usb3 {
status = "okay";
};

20
target/linux/ipq40xx/image/mikrotik.mk
View File

@ -78,3 +78,23 @@ define Device/mikrotik_wap-ac
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
TARGET_DEVICES += mikrotik_wap-ac
define Device/mikrotik_wap-r-ac
$(call Device/mikrotik_wap-ac)
DEVICE_MODEL := wAP R ac
DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi \
kmod-usb-acm kmod-usb-net-rndis
DEVICE_DTS := qcom-ipq4018-wap-r-ac
endef
TARGET_DEVICES += mikrotik_wap-r-ac
define Device/mikrotik_wap-ac-lte
$(call Device/mikrotik_wap-ac)
DEVICE_MODEL := wAP ac LTE
DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi \
kmod-usb-acm kmod-usb-net-rndis
DEVICE_DTS := qcom-ipq4018-wap-ac-lte
DEVICE_ALT0_VENDOR = Mikrotik
DEVICE_ALT0_MODEL := wAP ac LTE6
endef
TARGET_DEVICES += mikrotik_wap-ac-lte