tn3399_openwrt/target/linux/ath79/dts/qca9557_dongwon_dw02-412h.dtsi

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qca955x.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	aliases {
		led-boot = &led_wan;
		led-failsafe = &led_wan;
		led-upgrade = &led_wan;
	};

	keys {
		compatible = "gpio-keys";

		wps {
			label = "WPS button";
			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		reset {
			label = "Reset button";
			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_wan: wan {
			label = "green:wan";
			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
		};

		wlan {
			label = "green:wlan";
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
		};
	};
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <50000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x000000 0x040000>;
				read-only;
			};

			partition@40000 {
				label = "u-boot-env";
				reg = <0x040000 0x010000>;
			};

			partition@50000 {
				label = "log";
				reg = <0x050000 0x010000>;
				read-only;
			};

			partition@60000 {
				label = "recoverk";
				reg = <0x060000 0x0e0000>;
				read-only;
			};

			partition@140000 {
				label = "recoverr";
				reg = <0x140000 0x090000>;
				read-only;
			};

			partition@1d0000 {
				label = "nvram";
				reg = <0x1d0000 0x010000>;
				read-only;
			};

			partition@1e0000 {
				label = "nvbackup";
				reg = <0x1e0000 0x010000>;
				read-only;
			};

			partition@1f0000 {
				label = "art";
				reg = <0x1f0000 0x010000>;
				read-only;

				compatible = "nvmem-cells";
				#address-cells = <1>;
				#size-cells = <1>;

				macaddr_art_0: macaddr@0 {
					reg = <0x0 0x6>;
				};

				cal_art_1000: cal@1000 {
					reg = <0x1000 0x440>;
				};

				cal_art_5000: cal@5000 {
					reg = <0x5000 0x844>;
				};
			};
		};
	};
};

&nand {
	status = "okay";

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "current";
			reg = <0x0 0x1000000>;
			read-only;
		};

		partition@1000000 {
			label = "kernel";
			reg = <0x1000000 0x800000>;
		};

		ubi: partition@1800000 {
			label = "ubi";
		};
	};
};

&pcie0 {
	status = "okay";

	wifi@0,0 {
		compatible = "qcom,ath10k";
		reg = <0 0 0 0 0>;

		nvmem-cells = <&macaddr_art_0>, <&cal_art_5000>;
		nvmem-cell-names = "mac-address", "calibration";
		mac-address-increment = <4>;
	};
};

&wmac {
	status = "okay";

	nvmem-cells = <&macaddr_art_0>, <&cal_art_1000>;
	nvmem-cell-names = "mac-address", "calibration";
	mac-address-increment = <3>;
};

&usb_phy0 {
	status = "okay";
};

&usb0 {
	status = "okay";
};

&mdio0 {
	status = "okay";

	phy0: ethernet-phy@0 {
		reg = <0>;

		qca,ar8327-initvals = <
			0x04 0x07600000 /* PORT0 PAD MODE CTRL */
			0x50 0xcf37cf37 /* LED Control Register 0 */
			0x54 0x00000000 /* LED Control Register 1 */
			0x58 0x00000000 /* LED Control Register 2 */
			0x5c 0x0030c300 /* LED Control Register 3 */
			0x7c 0x0000007e /* PORT0_STATUS */
		>;
	};
};

&eth0 {
	status = "okay";

	nvmem-cells = <&macaddr_art_0>;
	nvmem-cell-names = "mac-address";
	mac-address-increment = <1>;
	phy-handle = <&phy0>;
	pll-data = <0xa6000000 0x00000101 0x00001616>;

	gmac-config {
		device = <&gmac>;
		rgmii-enabled = <1>;
	};
};