mvebu: add support for GL.iNet GL-MV1000

This patch adds supports for GL-MV1000.

Specification:
	- SOC: Marvell Armada 88F3720 (1GHz)
	- Flash: 16MB (W25Q128FWSIG)
	- RAM: 1GB DDR4
	- Ethernet: 3x GE (1 WAN + 2 LAN)
	- EMMC: 8GB EMMC (KLM8G1GETF-B041)
	- MicroSD: 1x microSD slot
	- USB: 1x USB 2.0 port(TypeA),1x USB 3.0 port(TypeC)
	- Button: 1x reset button,1x slide switch
	- LED: 3x greed LED
	- UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND)

	Update firmware instructions
	============================
	In the compiled,please gzip -d xxx.img.gz,then update firmware on uboot web.

Signed-off-by: Li Zhang <li.zhang@gl-inet.com>
[Copied dts file to files-5.4]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Li Zhang 2020-04-17 14:39:32 +08:00 committed by Hauke Mehrtens
parent cf22c4435e
commit 050c24f05c
5 changed files with 344 additions and 1 deletions

View File

@ -24,6 +24,9 @@ globalscale,espressobin-v7-emmc|\
marvell,armada8040-mcbin)
ubootenv_add_uci_config "/dev/mtd0" "0x3f0000" "0x10000" "0x10000" "1"
;;
glinet,gl-mv1000)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x8000" "1"
;;
linksys,caiman|\
linksys,cobra|\
linksys,shelby)

View File

@ -14,7 +14,8 @@ case "$board" in
globalscale,espressobin|\
globalscale,espressobin-emmc|\
globalscale,espressobin-v7|\
globalscale,espressobin-v7-emmc)
globalscale,espressobin-v7-emmc|\
glinet,gl-mv1000)
ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
;;
marvell,armada-3720-db|\

View File

@ -0,0 +1,165 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for GL.iNet GL-MV1000
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "armada-372x.dtsi"
/ {
model = "GL.inet GL-MV1000";
compatible = "glinet,gl-mv1000", "marvell,armada3720";
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
vcc_sd_reg1: regulator {
compatible = "regulator-gpio";
regulator-name = "vcc_sd1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
gpios-states = <0>;
states = <1800000 0x1
3300000 0x0>;
enable-active-high;
};
};
&spi0 {
status = "okay";
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0 0xf0000>;
};
partition@f0000 {
label = "u-boot-env";
reg = <0Xf0000 0x8000>;
};
factory: partition@f8000 {
label = "factory";
reg = <0xf8000 0x8000>;
};
};
};
};
&sdhci1 {
wp-inverted;
bus-width = <4>;
cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
marvell,pad-type = "sd";
no-1-8-v;
vqmmc-supply = <&vcc_sd_reg1>;
status = "okay";
};
&sdhci0 {
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs400-1_8v;
non-removable;
no-sd;
no-sdio;
marvell,pad-type = "fixed-1-8v";
status = "okay";
};
&usb3 {
status = "okay";
};
&usb2 {
status = "okay";
};
&uart0 {
status = "okay";
};
&mdio {
switch0: switch0@1 {
compatible = "marvell,mv88e6085";
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
dsa,member = <0 0>;
ports: ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&eth0>;
};
port@1 {
reg = <1>;
label = "wan";
phy-handle = <&switch0phy0>;
};
port@2 {
reg = <2>;
label = "lan0";
phy-handle = <&switch0phy1>;
};
port@3 {
reg = <3>;
label = "lan1";
phy-handle = <&switch0phy2>;
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch0phy0: switch0phy0@11 {
reg = <0x11>;
};
switch0phy1: switch0phy1@12 {
reg = <0x12>;
};
switch0phy2: switch0phy2@13 {
reg = <0x13>;
};
};
};
};
&eth0 {
mtd-mac-address = <&factory 0x0>;
phy-mode = "rgmii-id";
status = "okay";
fixed-link {
speed = <1000>;
full-duplex;
};
};

View File

@ -0,0 +1,165 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for GL.iNet GL-MV1000
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "armada-372x.dtsi"
/ {
model = "GL.inet GL-MV1000";
compatible = "glinet,gl-mv1000", "marvell,armada3720";
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
vcc_sd_reg1: regulator {
compatible = "regulator-gpio";
regulator-name = "vcc_sd1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
gpios-states = <0>;
states = <1800000 0x1
3300000 0x0>;
enable-active-high;
};
};
&spi0 {
status = "okay";
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0 0xf0000>;
};
partition@f0000 {
label = "u-boot-env";
reg = <0Xf0000 0x8000>;
};
factory: partition@f8000 {
label = "factory";
reg = <0xf8000 0x8000>;
};
};
};
};
&sdhci1 {
wp-inverted;
bus-width = <4>;
cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
marvell,pad-type = "sd";
no-1-8-v;
vqmmc-supply = <&vcc_sd_reg1>;
status = "okay";
};
&sdhci0 {
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs400-1_8v;
non-removable;
no-sd;
no-sdio;
marvell,pad-type = "fixed-1-8v";
status = "okay";
};
&usb3 {
status = "okay";
};
&usb2 {
status = "okay";
};
&uart0 {
status = "okay";
};
&mdio {
switch0: switch0@1 {
compatible = "marvell,mv88e6085";
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
dsa,member = <0 0>;
ports: ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&eth0>;
};
port@1 {
reg = <1>;
label = "wan";
phy-handle = <&switch0phy0>;
};
port@2 {
reg = <2>;
label = "lan0";
phy-handle = <&switch0phy1>;
};
port@3 {
reg = <3>;
label = "lan1";
phy-handle = <&switch0phy2>;
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch0phy0: switch0phy0@11 {
reg = <0x11>;
};
switch0phy1: switch0phy1@12 {
reg = <0x12>;
};
switch0phy2: switch0phy2@13 {
reg = <0x13>;
};
};
};
};
&eth0 {
mtd-mac-address = <&factory 0x0>;
phy-mode = "rgmii-id";
status = "okay";
fixed-link {
speed = <1000>;
full-duplex;
};
};

View File

@ -69,3 +69,12 @@ define Device/methode_udpu
BOOT_SCRIPT := udpu
endef
TARGET_DEVICES += methode_udpu
define Device/glinet_gl-mv1000
$(call Device/Default-arm64)
DEVICE_TITLE := GL.iNet GL-MV1000
DEVICE_DTS := armada-gl-mv1000
SUPPORTED_DEVICES := glinet,gl-mv1000
endef
TARGET_DEVICES += glinet_gl-mv1000