183130227/tn3399_openwrt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ar71xx: add support for the wzr-hp-g300nh2

Browse Source 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

SVN-Revision: 29567
This commit is contained in:
Felix Fietkau 2011-12-18 22:20:17 +00:00
parent fe8a3a36f0
commit 0cc056cb7e
10 changed files with 231 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -114,6 +114,9 @@ get_status_led() {
wzr-hp-g300nh)
status_led="buffalo:green:router"
;;
wzr-hp-g300nh2)
status_led="buffalo:red:diag"
;;
wndr3700)
status_led="wndr3700:green:power"
;;

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -295,6 +295,9 @@ ar71xx_board_detect() {
*WZR-HP-G450H)
name="wzr-hp-g450h"
;;
*WZR-HP-G300NH2)
name="wzr-hp-g300nh2"
;;
*WHR-HP-G300N)
name="whr-hp-g300n"
;;

1
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -102,6 +102,7 @@ platform_check_image() {
bullet-m | \
nanostation-m | \
rocket-m | \
wzr-hp-g300nh2 | \
wzr-hp-g300nh | \
wzr-hp-g450h | \
wzr-hp-ag300h | \

1
target/linux/ar71xx/config-2.6.39
View File

@ -55,6 +55,7 @@ CONFIG_AR71XX_MACH_WRT160NL=y
CONFIG_AR71XX_MACH_WRT400N=y
CONFIG_AR71XX_MACH_WZR_HP_AG300H=y
CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
CONFIG_AR71XX_MACH_WZR_HP_G300NH2=y
CONFIG_AR71XX_MACH_WZR_HP_G450H=y
CONFIG_AR71XX_MACH_ZCN_1523H=y
CONFIG_AR71XX_NVRAM=y

9
target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
View File

@ -163,6 +163,15 @@ config AR71XX_MACH_WZR_HP_G300NH
select AR71XX_DEV_USB
select RTL8366_SMI
config AR71XX_MACH_WZR_HP_G300NH2
bool "Buffalo WZR-HP-G300NH2 board support"
select SOC_AR724X
select AR71XX_DEV_M25P80
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_AP91_PCI if PCI
select AR71XX_DEV_LEDS_GPIO
select AR71XX_DEV_USB
config AR71XX_MACH_WHR_HP_G300N
bool "Buffalo WHR-HP-G300N board support"
select SOC_AR724X

1
target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
View File

@ -69,6 +69,7 @@ obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o
obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o
obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o
obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
obj-$(CONFIG_AR71XX_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
obj-$(CONFIG_AR71XX_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
obj-$(CONFIG_AR71XX_MACH_ZCN_1523H) += mach-zcn-1523h.o

195
target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c Normal file
View File

@ -0,0 +1,195 @@
/*
* Buffalo WZR-HP-G300NH2 board support
*
* Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include <asm/mach-ar71xx/gpio.h>
#include "machtype.h"
#include "devices.h"
#include "dev-ap91-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#define WZRHPG300NH2_MAC_OFFSET 0x20c
#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */
#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL)
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition wzrhpg300nh2_flash_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x0040000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "u-boot-env",
.offset = 0x0040000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "art",
.offset = 0x0050000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = 0x0060000,
.size = 0x0100000,
}, {
.name = "rootfs",
.offset = 0x0160000,
.size = 0x1e90000,
}, {
.name = "user_property",
.offset = 0x1ff0000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "firmware",
.offset = 0x0060000,
.size = 0x1f90000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data wzrhpg300nh2_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.parts = wzrhpg300nh2_flash_partitions,
.nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions),
#endif
};
static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = {
{
.name = "buffalo:red:diag",
.gpio = 16,
.active_low = 1,
},
};
static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = {
{
.name = "buffalo:blue:usb",
.gpio = 4,
.active_low = 1,
},
{
.name = "buffalo:green:wireless",
.gpio = 5,
.active_low = 1,
},
{
.name = "buffalo:orange:security",
.gpio = 6,
.active_low = 1,
},
{
.name = "buffalo:green:router",
.gpio = 7,
.active_low = 1,
},
{
.name = "buffalo:blue:movie_engine_on",
.gpio = 8,
.active_low = 1,
},
{
.name = "buffalo:blue:movie_engine_off",
.gpio = 9,
.active_low = 1,
},
};
/* The AOSS button is wmac gpio 12 */
static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
.gpio = 1,
.active_low = 1,
}, {
.desc = "usb",
.type = EV_KEY,
.code = BTN_2,
.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
.gpio = 7,
.active_low = 1,
}, {
.desc = "qos",
.type = EV_KEY,
.code = BTN_3,
.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
.gpio = 11,
.active_low = 0,
}, {
.desc = "router_on",
.type = EV_KEY,
.code = BTN_5,
.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
.gpio = 8,
.active_low = 0,
},
};
static void __init wzrhpg300nh2_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000);
u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET;
/* There is an eth1 but it is not connected to the switch */
ar71xx_add_device_m25p80_multi(&wzrhpg300nh2_flash_data);
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac0, 0);
ar71xx_add_device_mdio(0, ~(BIT(0)));
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac0, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.phy_mask = BIT(0);
ar71xx_add_device_eth(0);
ar71xx_add_device_usb();
/* gpio13 is usb power. Turn it on. */
gpio_request(13, "usb");
gpio_direction_output(13, 1);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio),
wzrhpg300nh2_leds_gpio);
ar71xx_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wzrhpg300nh2_gpio_keys),
wzrhpg300nh2_gpio_keys);
ap91_pci_setup_wmac_led_pin(22);
ap91_pci_setup_wmac_leds(wzrhpg300nh2_wmac_leds_gpio,
ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio));
ap91_pci_init(eeprom, mac0);
}
MIPS_MACHINE(AR71XX_MACH_WZR_HP_AG300H, "WZR-HP-G300NH2",
"Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup);

1
target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
View File

@ -77,6 +77,7 @@ enum ar71xx_mach_type {
AR71XX_MACH_WRT400N, /* Linksys WRT400N */
AR71XX_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
AR71XX_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
AR71XX_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */

11
target/linux/ar71xx/generic/profiles/buffalo.mk
View File

@ -16,6 +16,17 @@ endef
$(eval $(call Profile,WZRHPG300NH))
define Profile/WZRHPG300NH2
NAME:=Buffalo WZR-HP-G300NH2
PACKAGES:=kmod-ath9k wpad-mini kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
endef
define Profile/WZRHPG300NH/Description
Package set optimized for the Buffalo WZR-HP-G300NH2
endef
$(eval $(call Profile,WZRHPG300NH2))
define Profile/WZRHPAG300H
NAME:=Buffalo WZR-HP-AG300H
PACKAGES:=kmod-usb-ohci kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev

6
target/linux/ar71xx/image/Makefile
View File

@ -856,6 +856,11 @@ define Image/Build/Profile/WZRHPG300NH
$(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG30XNH,wzr-hp-g300nh,$(wzrhpg300nh_cmdline),WZR-HP-G300NH)
endef
wzrhpg300nh2_cmdline=board=WZR-HP-G300NH2 console=ttyS0,115200
define Image/Build/Profile/WZRHPG300NH2
$(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG30XNH,wzr-hp-g300nh2,$(wzrhpg300nh2_cmdline),WZR-HP-G300NH2)
endef
wzrhpag300h_cmdline=board=WZR-HP-AG300H console=ttyS0,115200
define Image/Build/Profile/WZRHPAG300H
$(call Image/Build/Template/$(fs_128k)/$(1),WZRHPG30XNH,wzr-hp-ag300h,$(wzrhpag300h_cmdline),WZR-HP-AG300H)
@ -926,6 +931,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/WHRHPG300N,$(1))
$(call Image/Build/Profile/WHRHPGN,$(1))
$(call Image/Build/Profile/WZRHPG300NH,$(1))
$(call Image/Build/Profile/WZRHPG300NH2,$(1))
$(call Image/Build/Profile/WZRHPAG300H,$(1))
$(call Image/Build/Profile/WZRHPG450H,$(1))
$(call Image/Build/Profile/ZCN1523H28,$(1))