ar71xx: add kernel support for Netgear WNDAP360

Here is corrected version (only thing not working are wifi LEDs).

[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36578
This commit is contained in:
Gabor Juhos 2013-05-08 17:03:34 +00:00
parent 39467e78e7
commit 10b3ca5ccb
3 changed files with 150 additions and 0 deletions

View File

@ -82,6 +82,7 @@ CONFIG_ATH79_MACH_UBNT=y
CONFIG_ATH79_MACH_UBNT_XM=y
CONFIG_ATH79_MACH_WHR_HP_G300N=y
CONFIG_ATH79_MACH_WLAE_AG300N=y
CONFIG_ATH79_MACH_WNDAP360=y
CONFIG_ATH79_MACH_WNDR3700=y
CONFIG_ATH79_MACH_WNDR4300=y
CONFIG_ATH79_MACH_WNR2000=y

View File

@ -0,0 +1,105 @@
/*
* Netgear WNDAP360 board support (proper leds / button support missing)
*
* Based on AP96
* Copyright (C) 2013 Jacek Kikiewicz
* Copyright (C) 2009 Marco Porsch
* Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2010 Atheros Communications
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <asm/mach-ath79/ath79.h>
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "machtypes.h"
#define WNDAP360_GPIO_LED_POWER_ORANGE 0
#define WNDAP360_GPIO_LED_POWER_GREEN 2
/* Reset button - next to the power connector */
#define WNDAP360_GPIO_BTN_RESET 3
/* WPS button - next to a led on right */
#define WNDAP360_GPIO_BTN_WPS 8
#define WNDAP360_KEYS_POLL_INTERVAL 20 /* msecs */
#define WNDAP360_KEYS_DEBOUNCE_INTERVAL (3 * WNDAP360_KEYS_POLL_INTERVAL)
#define WNDAP360_WMAC0_MAC_OFFSET 0x120c
#define WNDAP360_WMAC1_MAC_OFFSET 0x520c
#define WNDAP360_CALDATA0_OFFSET 0x1000
#define WNDAP360_CALDATA1_OFFSET 0x5000
/*
* WNDAP360 this still uses leds definitions from AP96
*
*/
static struct gpio_led wndap360_leds_gpio[] __initdata = {
{
.name = "wndap360:green:power",
.gpio = WNDAP360_GPIO_LED_POWER_GREEN,
.active_low = 1,
}, {
.name = "wndap360:orange:power",
.gpio = WNDAP360_GPIO_LED_POWER_ORANGE,
.active_low = 1,
}
};
static struct gpio_keys_button wndap360_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WNDAP360_KEYS_DEBOUNCE_INTERVAL,
.gpio = WNDAP360_GPIO_BTN_RESET,
.active_low = 1,
}
};
#define WNDAP360_LAN_PHYMASK 0x0f
static void __init wndap360_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_mdio(0, ~(WNDAP360_LAN_PHYMASK));
ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
ath79_eth0_pll_data.pll_1000 = 0x11110000;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = WNDAP360_LAN_PHYMASK;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_register_eth(0);
ath79_register_usb();
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wndap360_leds_gpio),
wndap360_leds_gpio);
ath79_register_gpio_keys_polled(-1, WNDAP360_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wndap360_gpio_keys),
wndap360_gpio_keys);
ap94_pci_init(art + WNDAP360_CALDATA0_OFFSET,
art + WNDAP360_WMAC0_MAC_OFFSET,
art + WNDAP360_CALDATA1_OFFSET,
art + WNDAP360_WMAC1_MAC_OFFSET);
}
MIPS_MACHINE(ATH79_MACH_WNDAP360, "WNDAP360", "Netgear WNDAP360", wndap360_setup);

View File

@ -0,0 +1,44 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -117,6 +117,7 @@ enum ath79_mach_type {
ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
+ ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */
ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -378,6 +378,16 @@ config ATH79_MACH_RB2011
select ATH79_DEV_WMAC
select ATH79_ROUTERBOOT
+config ATH79_MACH_WNDAP360
+ bool "NETGEAR WNDAP360 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
config ATH79_MACH_WNDR3700
bool "NETGEAR WNDR3700 board support"
select SOC_AR71XX
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -98,6 +98,7 @@ obj-$(CONFIG_ATH79_MACH_UBNT) += mach-u
obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
+obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o
obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
@@ -111,4 +112,3 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2)
obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
-