ath79: Add support for Plasma Cloud PA300E
Device specifications: * Qualcomm/Atheros QCA9533 v2 * 650/600/217 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash (mx25l12805d) - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 2T2R 2.4 GHz Wi-Fi * multi-color LED (controlled via red/green/blue GPIOs) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + Label: Ethernet 1 + 24V passive POE (mode B) + used as WAN interface - eth1 + Label: Ethernet 2 + 802.3af POE + builtin switch port 2 + used as LAN interface * 12-24V 1A DC * external antennas Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Sven Eckelmann <sven@narfation.org>
This commit is contained in:
parent
5fc28ef479
commit
17e5920490
|
@ -81,7 +81,8 @@ netgear,wndr4300tn|\
|
||||||
netgear,wndr4300sw)
|
netgear,wndr4300sw)
|
||||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x20000"
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x20000"
|
||||||
;;
|
;;
|
||||||
plasmacloud,pa300)
|
plasmacloud,pa300|\
|
||||||
|
plasmacloud,pa300e)
|
||||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
|
||||||
;;
|
;;
|
||||||
qihoo,c301)
|
qihoo,c301)
|
||||||
|
|
8
target/linux/ath79/dts/qca9533_plasmacloud_pa300e.dts
Normal file
8
target/linux/ath79/dts/qca9533_plasmacloud_pa300e.dts
Normal file
|
@ -0,0 +1,8 @@
|
||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
|
||||||
|
#include "qca9533_plasmacloud_pa300.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
compatible = "plasmacloud,pa300e", "qca,qca9533";
|
||||||
|
model = "Plasma Cloud PA300E";
|
||||||
|
};
|
|
@ -150,6 +150,7 @@ ath79_setup_interfaces()
|
||||||
comfast,cf-e314n-v2|\
|
comfast,cf-e314n-v2|\
|
||||||
compex,wpj531-16m|\
|
compex,wpj531-16m|\
|
||||||
plasmacloud,pa300|\
|
plasmacloud,pa300|\
|
||||||
|
plasmacloud,pa300e|\
|
||||||
tplink,cpe210-v1|\
|
tplink,cpe210-v1|\
|
||||||
tplink,cpe220-v2|\
|
tplink,cpe220-v2|\
|
||||||
tplink,cpe220-v3|\
|
tplink,cpe220-v3|\
|
||||||
|
|
|
@ -45,7 +45,8 @@ platform_do_upgrade_dualboot_datachk() {
|
||||||
# boot anymore to Linux until it was reflashed with ap51-flash.
|
# boot anymore to Linux until it was reflashed with ap51-flash.
|
||||||
local next_boot_part="1"
|
local next_boot_part="1"
|
||||||
case "$(board_name)" in
|
case "$(board_name)" in
|
||||||
plasmacloud,pa300)
|
plasmacloud,pa300|\
|
||||||
|
plasmacloud,pa300e)
|
||||||
primary_kernel_mtd=3
|
primary_kernel_mtd=3
|
||||||
;;
|
;;
|
||||||
*)
|
*)
|
||||||
|
|
|
@ -50,7 +50,8 @@ platform_do_upgrade() {
|
||||||
jjplus,ja76pf2)
|
jjplus,ja76pf2)
|
||||||
redboot_fis_do_upgrade "$1" linux
|
redboot_fis_do_upgrade "$1" linux
|
||||||
;;
|
;;
|
||||||
plasmacloud,pa300)
|
plasmacloud,pa300|\
|
||||||
|
plasmacloud,pa300e)
|
||||||
PART_NAME="inactive"
|
PART_NAME="inactive"
|
||||||
platform_do_upgrade_dualboot_datachk "$1"
|
platform_do_upgrade_dualboot_datachk "$1"
|
||||||
;;
|
;;
|
||||||
|
|
|
@ -1597,6 +1597,12 @@ define Device/plasmacloud_pa300
|
||||||
endef
|
endef
|
||||||
TARGET_DEVICES += plasmacloud_pa300
|
TARGET_DEVICES += plasmacloud_pa300
|
||||||
|
|
||||||
|
define Device/plasmacloud_pa300e
|
||||||
|
$(Device/plasmacloud_pa300-common)
|
||||||
|
DEVICE_MODEL := PA300E
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += plasmacloud_pa300e
|
||||||
|
|
||||||
define Device/qihoo_c301
|
define Device/qihoo_c301
|
||||||
$(Device/seama)
|
$(Device/seama)
|
||||||
SOC := ar9344
|
SOC := ar9344
|
||||||
|
|
Loading…
Reference in New Issue
Block a user