USR8200 changes The attached patch adds LED support and enables all the PHYs on the switch.

Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>

Also adds preliminary support for enabling the RTC, and some cache reporting
tweaks.

SVN-Revision: 13942
This commit is contained in:
Peter Denison 2009-01-08 22:13:48 +00:00
parent 448dd4ac3a
commit 1a3afcfe5d
2 changed files with 70 additions and 26 deletions

View File

@ -116,7 +116,7 @@
+subsys_initcall(usr8200_pci_init);
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
@@ -0,0 +1,187 @@
@@ -0,0 +1,211 @@
+/*
+ * arch/arm/mach-ixp4xx/usr8200-setup.c
+ *
@ -215,29 +215,35 @@
+ .resource = usr8200_uart_resources,
+};
+
+/*
+static struct i2c_gpio_platform_data usr8200_i2c_gpio_data = {
+ .sda_pin = 9,
+ .scl_pin = 10,
+};
+
+static struct platform_device usr8200_i2c_gpio = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &usr8200_i2c_gpio_data,
+ },
+};
+
+static struct gpio_led usr8200_led_pin[] = {
+ {
+ .name = "usr8200:green:status",
+ .gpio = 7,
+ .name = "usr8200:usb1",
+ .gpio = 0,
+ .active_low = 1,
+ },
+ {
+ .name = "usr8200:usb2",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "usr8200:ieee1394",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "usr8200:internal",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "usr8200:power",
+ .gpio = 14,
+ }
+};
+
+static struct gpio_led_platform_data usr8200_led_data = {
+ .num_leds = 1,
+ .num_leds = ARRAY_SIZE(usr8200_led_pin),
+ .leds = usr8200_led_pin,
+};
+
@ -246,14 +252,14 @@
+ .id = -1,
+ .dev.platform_data = &usr8200_led_data,
+};
+*/
+
+static struct eth_plat_info usr8200_plat_eth[] = {
+ {
+ .phy = 16,
+ { /* NPEC - LAN with Marvell 88E6060 switch */
+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
+ .phy_mask = 0x0F0000,
+ .rxq = 4,
+ .txreadyq = 21,
+ }, {
+ }, { /* NPEB - WAN */
+ .phy = 9,
+ .rxq = 3,
+ .txreadyq = 20,
@ -272,13 +278,23 @@
+ }
+};
+
+static struct resource usr8200_rtc_resources = {
+ .flags = IORESOURCE_MEM
+};
+
+static struct platform_device usr8200_rtc = {
+ .name = "rtc7301",
+ .id = 0,
+ .resource = &usr8200_rtc_resources,
+};
+
+static struct platform_device *usr8200_devices[] __initdata = {
+ &usr8200_flash,
+ &usr8200_uart,
+/* &usr8200_led,
+ &usr8200_i2c_gpio, */
+ &usr8200_led,
+ &usr8200_eth[0],
+ &usr8200_eth[1],
+ &usr8200_rtc,
+};
+
+static void __init usr8200_init(void)
@ -286,10 +302,18 @@
+ ixp4xx_sys_init();
+
+ usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
+ usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
+
+ usr8200_rtc_resources.start = IXP4XX_EXP_BUS_BASE(2);
+ usr8200_rtc_resources.end = IXP4XX_EXP_BUS_BASE(2) + 0x01ff;
+
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+ *IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
+ IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
+ *IXP4XX_GPIO_GPCLKR = 0x01100000;
+
+ /* configure button as input */
+ gpio_line_config(12, IXP4XX_GPIO_IN);
+
+ platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices));
+}

View File

@ -0,0 +1,20 @@
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -184,7 +184,7 @@ static const char *cache_types[16] = {
"write-back",
"undefined 3",
"undefined 4",
- "undefined 5",
+ "write-back",
"write-back",
"write-back",
"undefined 8",
@@ -203,7 +203,7 @@ static const char *cache_clean[16] = {
"cp15 c7 ops",
"undefined 3",
"undefined 4",
- "undefined 5",
+ "cp15 c7 ops",
"cp15 c7 ops",
"cp15 c7 ops",
"undefined 8",