ramips: rt305x: add support for the UR-336UN board

Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31451
This commit is contained in:
Gabor Juhos 2012-04-23 16:56:06 +00:00
parent 3626444c6d
commit 1ab80c7817
11 changed files with 139 additions and 0 deletions

View File

@ -102,6 +102,9 @@ get_status_led() {
wr512-3gn)
status_led="wr512:green:wps"
;;
ur-336un)
status_led="ur336:green:wps"
;;
xdxrn502j)
status_led="xdxrn502j:green:power"
;;

View File

@ -32,6 +32,10 @@ ramips_setup_interfaces()
f5d8235-v1 | \
f5d8235-v2 | \
ur-336un)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
v11st-fe)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
@ -110,6 +114,11 @@ ramips_setup_macs()
;;
esr-9753 | \
ur-336un)
lan_mac=$(ramips_get_mac_binary devdata 16388)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;
nbg-419n | \
wcr-150gn)
lan_mac=$(ramips_get_mac_binary factory 4)

View File

@ -152,6 +152,9 @@ ramips_board_name() {
*"WR512-3GN-like router")
name="wr512-3gn"
;;
*"UR-336UN Wireless N router")
name="ur-336un"
;;
*"AWB WR6202")
name="wr6202"
;;

View File

@ -40,6 +40,7 @@ platform_check_image() {
wl-330n | \
wli-tx4-ag300n | \
whr-g300n |\
ur-336un |\
wr512-3gn)
[ "$magic" != "2705" ] && {
echo "Invalid image type."

View File

@ -55,6 +55,7 @@ enum ramips_mach_type {
RAMIPS_MACH_WR512_3GN, /* SH-WR512NU/WS-WR512N1-like 3GN*/
RAMIPS_MACH_WR6202, /* Accton WR6202 */
RAMIPS_MACH_XDXRN502J, /* unknown XDX-RN502J */
RAMIPS_MACH_UR_336UN, /* UPVEL ROUTER */
/* RT3662 based machines */
RAMIPS_MACH_RT_N56U, /* Asus RT-N56U */

View File

@ -84,6 +84,11 @@ config RT305X_MACH_WR512_3GN
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_UR_336UN
bool "UR-336UN Wireless N router"
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_NW718
bool "Netcore NW718"
select RALINK_DEV_GPIO_BUTTONS

View File

@ -34,6 +34,7 @@ obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o
obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o
obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o
obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o
obj-$(CONFIG_RT305X_MACH_UR_336UN) += mach-ur-336un.o
obj-$(CONFIG_RT305X_MACH_WL_330N) += mach-wl-330n.o
obj-$(CONFIG_RT305X_MACH_WL_330N3G) += mach-wl-330n3g.o
obj-$(CONFIG_RT305X_MACH_WL341V3) += mach-wl341v3.o

View File

@ -0,0 +1,92 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#include "devices.h"
#define UR_336UN_GPIO_LED_3G 9
#define UR_336UN_GPIO_LED_GATEWAY 11
#define UR_336UN_GPIO_LED_AP 12
#define UR_336UN_GPIO_LED_STATION 13
#define UR_336UN_GPIO_LED_WPS 14
#define UR_336UN_GPIO_BUTTON_RESET 10
#define UR_336UN_GPIO_BUTTON_CONNECT 7
#define UR_336UN_GPIO_BUTTON_WPS 0
#define UR_336UN_GPIO_BUTTON_WPS2 8
#define UR_336UN_KEYS_POLL_INTERVAL 20
#define UR_336UN_KEYS_DEBOUNCE_INTERVAL (3 * UR_336UN_KEYS_POLL_INTERVAL)
static struct gpio_led UR_336UN_leds_gpio[] __initdata = {
{
.name = "ur336:green:3g",
.gpio = UR_336UN_GPIO_LED_3G,
.active_low = 1,
}, {
.name = "ur336:green:gateway",
.gpio = UR_336UN_GPIO_LED_GATEWAY,
.active_low = 1,
}, {
.name = "ur336:green:ap",
.gpio = UR_336UN_GPIO_LED_AP,
.active_low = 1,
}, {
.name = "ur336:green:wps",
.gpio = UR_336UN_GPIO_LED_WPS,
.active_low = 1,
}, {
.name = "ur336:green:station",
.gpio = UR_336UN_GPIO_LED_STATION,
.active_low = 1,
}
};
static struct gpio_keys_button UR_336UN_gpio_buttons[] __initdata = {
{
.desc = "reset_wps",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL,
.gpio = UR_336UN_GPIO_BUTTON_RESET,
.active_low = 1,
}, {
.desc = "mode",
.type = EV_KEY,
.code = KEY_M,
.debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL,
.gpio = UR_336UN_GPIO_BUTTON_CONNECT,
.active_low = 1,
}
};
#define UR_336UN_GPIO_MODE \
((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \
RT305X_GPIO_MODE_MDIO)
static void __init UR_336UN_init(void)
{
rt305x_gpio_init(UR_336UN_GPIO_MODE);
rt305x_register_flash(0);
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(UR_336UN_leds_gpio),
UR_336UN_leds_gpio);
ramips_register_gpio_buttons(-1, UR_336UN_KEYS_POLL_INTERVAL,
ARRAY_SIZE(UR_336UN_gpio_buttons),
UR_336UN_gpio_buttons);
rt305x_register_wifi();
rt305x_register_wdt();
rt305x_register_usb();
}
MIPS_MACHINE(RAMIPS_MACH_UR_336UN, "UR-336UN", "UR-336UN Wireless N router",
UR_336UN_init);

View File

@ -412,6 +412,11 @@ define Image/Build/Profile/WR5123GN
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr512-3gn-8M,WR512-3GN,ttyS1,57600,phys)
endef
define Image/Build/Profile/UPVEL
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,ur-336un,UR-336UN,ttyS1,57600,phys)
endef
define Image/Build/Profile/WR6202
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr6202,WR6202,ttyS1,115200,phys)
endef

View File

@ -113,6 +113,7 @@ CONFIG_RT305X_MACH_PWH2004=y
CONFIG_RT305X_MACH_RT_G32_REVB=y
CONFIG_RT305X_MACH_RT_N10_PLUS=y
CONFIG_RT305X_MACH_SL_R7205=y
CONFIG_RT305X_MACH_UR_336UN=y
CONFIG_RT305X_MACH_V22RW_2X2=y
CONFIG_RT305X_MACH_W306R_V20=y
CONFIG_RT305X_MACH_W502U=y

View File

@ -0,0 +1,18 @@
#
# Copyright (C) 2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/UPVEL
NAME:=UPVEL UR-336UN
PACKAGES:=\
kmod-usb-core kmod-usb-rt305x-dwc_otg \
kmod-ledtrig-usbdev
endef
define Profile/UPVEL/Description
Default package set compatible with URVEL router board.
endef
$(eval $(call Profile,UPVEL))