imx6: update Ventana dts

Update the Ventana device-tree to match upstream:
 - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx
 - align pinctrl with upstream
 - consolidate multiple patches into one

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39644
This commit is contained in:
Luka Perkov 2014-02-20 17:26:10 +00:00
parent a52100469f
commit 223c6808ba
20 changed files with 1827 additions and 1702 deletions

View File

@ -11,202 +11,11 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-gw51xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 DualLite GW51XX";
compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
/* these are used by bootloader for disabling nodes */
aliases {
can0 = &can1;
ethernet0 = &fec;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
led0 = &led0;
led1 = &led1;
nand = &gpmi;
usb0 = &usbh1;
usb1 = &usbotg;
};
memory {
reg = <0x10000000 0x20000000>;
};
leds {
compatible = "gpio-leds";
led0: user1 {
label = "user1";
gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
label = "user2";
gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
default-state = "off";
};
};
regulators {
compatible = "simple-bus";
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_5p0v: 5p0v {
compatible = "regulator-fixed";
regulator-name = "5P0V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 30 0>;
status = "okay";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand_2>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom2: eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom3: eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom4: eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
hwmon: gsc@29 {
compatible = "gw,gsp";
reg = <0x29>;
};
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
status = "okay";
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
reg = <0x3c>;
regulators {
sw1_reg: ltc3676__sw1 {
regulator-min-microvolt = <1175000>;
regulator-max-microvolt = <1175000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: ltc3676__sw2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
sw3_reg: ltc3676__sw3 {
regulator-min-microvolt = <1175000>;
regulator-max-microvolt = <1175000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: ltc3676__sw4 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ltc3676__ldo2 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: ltc3676__ldo4 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
};
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
status = "okay";
videoin: adv7180@20 {
compatible = "adi,adv7180";
reg = <0x20>;
};
};
&iomuxc {
@ -227,44 +36,3 @@
};
};
};
&pcie {
reset-gpio = <&gpio1 0 0>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_1>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_1>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_1>;
disable-over-current;
status = "okay";
};
&usbh1 {
status = "okay";
};

View File

@ -11,287 +11,11 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-gw52xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 DualLite GW52XX";
compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
/* these are used by bootloader for disabling nodes */
aliases {
can0 = &can1;
ethernet0 = &fec;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
led0 = &led0;
led1 = &led1;
led2 = &led2;
nand = &gpmi;
ssi0 = &ssi1;
usb0 = &usbh1;
usb1 = &usbotg;
usdhc2 = &usdhc3;
};
memory {
reg = <0x10000000 0x20000000>;
};
leds {
compatible = "gpio-leds";
led0: user1 {
label = "user1";
gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
label = "user2";
gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
label = "user3";
gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
default-state = "off";
};
};
regulators {
compatible = "simple-bus";
reg_1p0v: 1p0v {
compatible = "regulator-fixed";
regulator-name = "1P0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
/* remove this fixed regulator once ltc3676__sw2 driver available */
reg_1p8v: 1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_5p0v: 5p0v {
compatible = "regulator-fixed";
regulator-name = "5P0V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
};
sound {
compatible = "fsl,imx6q-sabrelite-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-sabrelite-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1_1>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 30 0>;
status = "okay";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand_2>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom2: eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom3: eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom4: eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
hwmon: gsc@29 {
compatible = "gw,gsp";
reg = <0x29>;
};
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
status = "okay";
pciswitch: pex8609@3f {
compatible = "plx,pex8609";
reg = <0x3f>;
};
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
reg = <0x3c>;
regulators {
sw1_reg: ltc3676__sw1 {
regulator-min-microvolt = <1175000>;
regulator-max-microvolt = <1175000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: ltc3676__sw2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
sw3_reg: ltc3676__sw3 {
regulator-min-microvolt = <1175000>;
regulator-max-microvolt = <1175000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: ltc3676__sw4 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ltc3676__ldo2 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: ltc3676__ldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: ltc3676__ldo4 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
};
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
status = "okay";
accelerometer: fxos8700@1e {
compatible = "fsl,fxos8700";
reg = <0x13>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;
};
touchscreen: egalax_ts@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio7>;
interrupts = <12 2>; /* gpio7_12 active low */
wakeup-gpios = <&gpio7 12 0>;
};
videoin: adv7180@20 {
compatible = "adi,adv7180";
reg = <0x20>;
};
};
&iomuxc {
@ -322,58 +46,3 @@
};
};
};
&ldb {
status = "okay";
lvds-channel@0 {
crtcs = <&ipu1 0>, <&ipu1 1>;
};
};
&pcie {
reset-gpio = <&gpio1 29 0>;
status = "okay";
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_1>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_1>;
disable-over-current;
status = "okay";
};
&usbh1 {
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_2>;
cd-gpios = <&gpio7 0 0>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};

View File

@ -11,303 +11,11 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-gw53xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 DualLite GW53XX";
compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
/* these are used by bootloader for disabling nodes */
aliases {
can0 = &can1;
ethernet0 = &fec;
ethernet1 = &eth1;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
led0 = &led0;
led1 = &led1;
led2 = &led2;
nand = &gpmi;
sky2 = &eth1;
ssi0 = &ssi1;
usb0 = &usbh1;
usb1 = &usbotg;
usdhc2 = &usdhc3;
};
chosen {
bootargs = "console=ttymxc1,115200";
};
memory {
reg = <0x10000000 0x40000000>;
};
leds {
compatible = "gpio-leds";
led0: user1 {
label = "user1";
gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
label = "user2";
gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
label = "user3";
gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
default-state = "off";
};
};
regulators {
compatible = "simple-bus";
reg_1p0v: 1p0v {
compatible = "regulator-fixed";
regulator-name = "1P0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
/* remove this fixed regulator once ltc3676__sw2 driver available */
reg_1p8v: 1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_h1_vbus: usb_h1_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
};
sound {
compatible = "fsl,imx6q-sabrelite-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-sabrelite-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1_1>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 30 0>;
status = "okay";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand_2>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom2: eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom3: eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom4: eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
hwmon: gsc@29 {
compatible = "gw,gsp";
reg = <0x29>;
};
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
status = "okay";
pciswitch: pex8609@3f {
compatible = "plx,pex8609";
reg = <0x3f>;
};
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
reg = <0x3c>;
regulators {
sw1_reg: ltc3676__sw1 {
regulator-min-microvolt = <1175000>;
regulator-max-microvolt = <1175000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: ltc3676__sw2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
sw3_reg: ltc3676__sw3 {
regulator-min-microvolt = <1175000>;
regulator-max-microvolt = <1175000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: ltc3676__sw4 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ltc3676__ldo2 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: ltc3676__ldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: ltc3676__ldo4 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
};
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
status = "okay";
accelerometer: fxos8700@1e {
compatible = "fsl,fxos8700";
reg = <0x1e>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;
};
hdmiin: adv7611@4c {
compatible = "adi,adv7611";
reg = <0x4c>;
};
touchscreen: egalax_ts@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio7>;
interrupts = <12 2>; /* gpio7_12 active low */
wakeup-gpios = <&gpio7 12 0>;
};
videoout: adv7393@2a {
compatible = "adi,adv7393";
reg = <0x2a>;
};
videoin: adv7180@20 {
compatible = "adi,adv7180";
reg = <0x20>;
};
};
&iomuxc {
@ -337,65 +45,3 @@
};
};
};
&ldb {
status = "okay";
lvds-channel@0 {
crtcs = <&ipu1 0>, <&ipu1 1>;
};
};
&pcie {
reset-gpio = <&gpio1 29 0>;
status = "okay";
eth1: sky2@8 { /* MAC/PHY on bus 8 */
compatible = "marvell,sky2";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_1>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_1>;
disable-over-current;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usb_h1_vbus>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_2>;
cd-gpios = <&gpio7 0 0>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};

View File

@ -0,0 +1,43 @@
/*
* Copyright 2013 Gateworks Corporation
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-gw54xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 DualLite GW54XX";
compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
MX6DL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
MX6DL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
MX6DL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
MX6DL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
MX6DL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
MX6DL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
MX6DL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
MX6DL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
MX6DL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
>;
};
};
};

View File

@ -0,0 +1,38 @@
/*
* Copyright 2013 Gateworks Corporation
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-gw51xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 Quad GW51XX";
compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6Q_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
MX6Q_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
MX6Q_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
>;
};
};
};

View File

@ -0,0 +1,52 @@
/*
* Copyright 2013 Gateworks Corporation
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-gw52xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 Quad GW52XX";
compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6Q_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
MX6Q_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
MX6Q_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
MX6Q_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */
MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
MX6Q_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
MX6Q_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
>;
};
};
};
&sata {
status = "okay";
};

View File

@ -0,0 +1,51 @@
/*
* Copyright 2013 Gateworks Corporation
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-gw53xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 Quad GW53XX";
compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6Q_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
MX6Q_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
MX6Q_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
MX6Q_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
MX6Q_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
>;
};
};
};
&sata {
status = "okay";
};

View File

@ -38,10 +38,6 @@
bootargs = "console=ttymxc1,115200";
};
memory {
reg = <0x10000000 0x40000000>;
};
leds {
compatible = "gpio-leds";
@ -65,6 +61,10 @@
};
};
memory {
reg = <0x10000000 0x40000000>;
};
regulators {
compatible = "simple-bus";
@ -406,13 +406,7 @@
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_1>;
pinctrl-0 = <&pinctrl_uart2_3>;
status = "okay";
};

View File

@ -11,344 +11,11 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-gw54xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 Quad GW54XX";
compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
/* these are used by bootloader for disabling nodes */
aliases {
can0 = &can1;
ethernet0 = &fec;
ethernet1 = &eth1;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
led0 = &led0;
led1 = &led1;
led2 = &led2;
nand = &gpmi;
sky2 = &eth1;
ssi0 = &ssi1;
usb0 = &usbh1;
usb1 = &usbotg;
usdhc2 = &usdhc3;
};
chosen {
bootargs = "console=ttymxc1,115200";
};
memory {
reg = <0x10000000 0x40000000>;
};
leds {
compatible = "gpio-leds";
led0: user1 {
label = "user1";
gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
label = "user2";
gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
label = "user3";
gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
default-state = "off";
};
};
regulators {
compatible = "simple-bus";
reg_1p0v: 1p0v {
compatible = "regulator-fixed";
regulator-name = "1P0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_h1_vbus: usb_h1_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
};
sound {
compatible = "fsl,imx6q-sabrelite-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-sabrelite-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1_1>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 30 0>;
status = "okay";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand_2>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom2: eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom3: eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom4: eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
hwmon: gsc@29 {
compatible = "gw,gsp";
reg = <0x29>;
};
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
status = "okay";
pmic: pfuze100@08 {
compatible = "fsl,pfuze100";
reg = <0x08>;
regulators {
sw1a_reg: sw1ab {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw1c_reg: sw1c {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3950000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3a {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
sw3b_reg: sw3b {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: sw4 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vgen1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen3_reg: vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
vgen4_reg: vgen4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen5_reg: vgen5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen6_reg: vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
pciswitch: pex8609@3f {
compatible = "plx,pex8609";
reg = <0x3f>;
};
pciclkgen: si52147@6b {
compatible = "sil,si52147";
reg = <0x6b>;
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
status = "okay";
accelerometer: fxos8700@1e {
compatible = "fsl,fxos8700";
reg = <0x1e>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
VDDA-supply = <&sw4_reg>;
VDDIO-supply = <&reg_3p3v>;
};
hdmiin: adv7611@4c {
compatible = "adi,adv7611";
reg = <0x4c>;
};
touchscreen: egalax_ts@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio7>;
interrupts = <12 2>; /* gpio7_12 active low */
wakeup-gpios = <&gpio7 12 0>;
};
videoout: adv7393@2a {
compatible = "adi,adv7393";
reg = <0x2a>;
};
videoin: adv7180@20 {
compatible = "adi,adv7180";
reg = <0x20>;
};
};
&iomuxc {
@ -375,74 +42,13 @@
};
};
&ldb {
&ldb {
status = "okay";
lvds-channel@0 {
crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
};
};
&pcie {
reset-gpio = <&gpio1 29 0>;
status = "okay";
eth1: sky2@8 { /* MAC/PHY on bus 8 */
compatible = "marvell,sky2";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
};
&sata {
status = "okay";
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_1>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_1>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_1>;
disable-over-current;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usb_h1_vbus>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_2>;
cd-gpios = <&gpio7 0 0>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};

View File

@ -0,0 +1,245 @@
/*
* Copyright 2013 Gateworks Corporation
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/ {
/* these are used by bootloader for disabling nodes */
aliases {
can0 = &can1;
ethernet0 = &fec;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
led0 = &led0;
led1 = &led1;
nand = &gpmi;
usb0 = &usbh1;
usb1 = &usbotg;
};
leds {
compatible = "gpio-leds";
led0: user1 {
label = "user1";
gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
label = "user2";
gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
default-state = "off";
};
};
memory {
reg = <0x10000000 0x20000000>;
};
regulators {
compatible = "simple-bus";
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_5p0v: 5p0v {
compatible = "regulator-fixed";
regulator-name = "5P0V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 30 0>;
status = "okay";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand_2>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom2: eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom3: eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom4: eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
hwmon: gsc@29 {
compatible = "gw,gsp";
reg = <0x29>;
};
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
status = "okay";
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
reg = <0x3c>;
regulators {
sw1_reg: ltc3676__sw1 {
regulator-min-microvolt = <1175000>;
regulator-max-microvolt = <1175000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: ltc3676__sw2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
sw3_reg: ltc3676__sw3 {
regulator-min-microvolt = <1175000>;
regulator-max-microvolt = <1175000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: ltc3676__sw4 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ltc3676__ldo2 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: ltc3676__ldo4 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
};
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
status = "okay";
videoin: adv7180@20 {
compatible = "adi,adv7180";
reg = <0x20>;
};
};
&pcie {
reset-gpio = <&gpio1 0 0>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_3>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_3>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_1>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_1>;
disable-over-current;
status = "okay";
};
&usbh1 {
status = "okay";
};

View File

@ -0,0 +1,344 @@
/*
* Copyright 2013 Gateworks Corporation
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/ {
/* these are used by bootloader for disabling nodes */
aliases {
can0 = &can1;
ethernet0 = &fec;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
led0 = &led0;
led1 = &led1;
led2 = &led2;
nand = &gpmi;
ssi0 = &ssi1;
usb0 = &usbh1;
usb1 = &usbotg;
usdhc2 = &usdhc3;
};
leds {
compatible = "gpio-leds";
led0: user1 {
label = "user1";
gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
label = "user2";
gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
label = "user3";
gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
default-state = "off";
};
};
memory {
reg = <0x10000000 0x20000000>;
};
regulators {
compatible = "simple-bus";
reg_1p0v: 1p0v {
compatible = "regulator-fixed";
regulator-name = "1P0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
/* remove this fixed regulator once ltc3676__sw2 driver available */
reg_1p8v: 1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_5p0v: 5p0v {
compatible = "regulator-fixed";
regulator-name = "5P0V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
};
sound {
compatible = "fsl,imx6q-sabrelite-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-sabrelite-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1_1>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 30 0>;
status = "okay";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand_2>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom2: eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom3: eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom4: eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
hwmon: gsc@29 {
compatible = "gw,gsp";
reg = <0x29>;
};
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
status = "okay";
pciswitch: pex8609@3f {
compatible = "plx,pex8609";
reg = <0x3f>;
};
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
reg = <0x3c>;
regulators {
sw1_reg: ltc3676__sw1 {
regulator-min-microvolt = <1175000>;
regulator-max-microvolt = <1175000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: ltc3676__sw2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
sw3_reg: ltc3676__sw3 {
regulator-min-microvolt = <1175000>;
regulator-max-microvolt = <1175000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: ltc3676__sw4 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ltc3676__ldo2 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: ltc3676__ldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: ltc3676__ldo4 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
};
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
status = "okay";
accelerometer: fxos8700@1e {
compatible = "fsl,fxos8700";
reg = <0x13>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;
};
touchscreen: egalax_ts@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio7>;
interrupts = <12 2>; /* gpio7_12 active low */
wakeup-gpios = <&gpio7 12 0>;
};
videoin: adv7180@20 {
compatible = "adi,adv7180";
reg = <0x20>;
};
};
&ldb {
status = "okay";
lvds-channel@0 {
crtcs = <&ipu1 0>, <&ipu1 1>;
};
};
&pcie {
reset-gpio = <&gpio1 29 0>;
status = "okay";
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_3>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_1>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_1>;
disable-over-current;
status = "okay";
};
&usbh1 {
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_2>;
cd-gpios = <&gpio7 0 0>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};

View File

@ -0,0 +1,367 @@
/*
* Copyright 2013 Gateworks Corporation
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/ {
/* these are used by bootloader for disabling nodes */
aliases {
can0 = &can1;
ethernet0 = &fec;
ethernet1 = &eth1;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
led0 = &led0;
led1 = &led1;
led2 = &led2;
nand = &gpmi;
sky2 = &eth1;
ssi0 = &ssi1;
usb0 = &usbh1;
usb1 = &usbotg;
usdhc2 = &usdhc3;
};
chosen {
bootargs = "console=ttymxc1,115200";
};
leds {
compatible = "gpio-leds";
led0: user1 {
label = "user1";
gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
label = "user2";
gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
label = "user3";
gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
default-state = "off";
};
};
memory {
reg = <0x10000000 0x40000000>;
};
regulators {
compatible = "simple-bus";
reg_1p0v: 1p0v {
compatible = "regulator-fixed";
regulator-name = "1P0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
/* remove this fixed regulator once ltc3676__sw2 driver available */
reg_1p8v: 1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_h1_vbus: usb_h1_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
};
sound {
compatible = "fsl,imx6q-sabrelite-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-sabrelite-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1_1>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 30 0>;
status = "okay";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand_2>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom2: eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom3: eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom4: eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
hwmon: gsc@29 {
compatible = "gw,gsp";
reg = <0x29>;
};
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
status = "okay";
pciswitch: pex8609@3f {
compatible = "plx,pex8609";
reg = <0x3f>;
};
pmic: ltc3676@3c {
compatible = "ltc,ltc3676";
reg = <0x3c>;
regulators {
sw1_reg: ltc3676__sw1 {
regulator-min-microvolt = <1175000>;
regulator-max-microvolt = <1175000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: ltc3676__sw2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
sw3_reg: ltc3676__sw3 {
regulator-min-microvolt = <1175000>;
regulator-max-microvolt = <1175000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: ltc3676__sw4 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ltc3676__ldo2 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: ltc3676__ldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: ltc3676__ldo4 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
};
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
status = "okay";
accelerometer: fxos8700@1e {
compatible = "fsl,fxos8700";
reg = <0x1e>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;
};
hdmiin: adv7611@4c {
compatible = "adi,adv7611";
reg = <0x4c>;
};
touchscreen: egalax_ts@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio7>;
interrupts = <12 2>; /* gpio7_12 active low */
wakeup-gpios = <&gpio7 12 0>;
};
videoout: adv7393@2a {
compatible = "adi,adv7393";
reg = <0x2a>;
};
videoin: adv7180@20 {
compatible = "adi,adv7180";
reg = <0x20>;
};
};
&ldb {
status = "okay";
lvds-channel@0 {
crtcs = <&ipu1 0>, <&ipu1 1>;
};
};
&pcie {
reset-gpio = <&gpio1 29 0>;
status = "okay";
eth1: sky2@8 { /* MAC/PHY on bus 8 */
compatible = "marvell,sky2";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_3>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_1>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_1>;
disable-over-current;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usb_h1_vbus>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_2>;
cd-gpios = <&gpio7 0 0>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};

View File

@ -0,0 +1,408 @@
/*
* Copyright 2013 Gateworks Corporation
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/ {
/* these are used by bootloader for disabling nodes */
aliases {
can0 = &can1;
ethernet0 = &fec;
ethernet1 = &eth1;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
led0 = &led0;
led1 = &led1;
led2 = &led2;
nand = &gpmi;
sky2 = &eth1;
ssi0 = &ssi1;
usb0 = &usbh1;
usb1 = &usbotg;
usdhc2 = &usdhc3;
};
chosen {
bootargs = "console=ttymxc1,115200";
};
leds {
compatible = "gpio-leds";
led0: user1 {
label = "user1";
gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
label = "user2";
gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
label = "user3";
gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
default-state = "off";
};
};
memory {
reg = <0x10000000 0x40000000>;
};
regulators {
compatible = "simple-bus";
reg_1p0v: 1p0v {
compatible = "regulator-fixed";
regulator-name = "1P0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_h1_vbus: usb_h1_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
};
sound {
compatible = "fsl,imx6q-sabrelite-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-sabrelite-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1_1>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 30 0>;
status = "okay";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand_2>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom2: eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom3: eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom4: eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
};
hwmon: gsc@29 {
compatible = "gw,gsp";
reg = <0x29>;
};
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
status = "okay";
pmic: pfuze100@08 {
compatible = "fsl,pfuze100";
reg = <0x08>;
regulators {
sw1a_reg: sw1ab {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw1c_reg: sw1c {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3950000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3a {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
sw3b_reg: sw3b {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: sw4 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vgen1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen3_reg: vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
vgen4_reg: vgen4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen5_reg: vgen5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen6_reg: vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
pciswitch: pex8609@3f {
compatible = "plx,pex8609";
reg = <0x3f>;
};
pciclkgen: si52147@6b {
compatible = "sil,si52147";
reg = <0x6b>;
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
status = "okay";
accelerometer: fxos8700@1e {
compatible = "fsl,fxos8700";
reg = <0x1e>;
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
VDDA-supply = <&sw4_reg>;
VDDIO-supply = <&reg_3p3v>;
};
hdmiin: adv7611@4c {
compatible = "adi,adv7611";
reg = <0x4c>;
};
touchscreen: egalax_ts@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio7>;
interrupts = <12 2>; /* gpio7_12 active low */
wakeup-gpios = <&gpio7 12 0>;
};
videoout: adv7393@2a {
compatible = "adi,adv7393";
reg = <0x2a>;
};
videoin: adv7180@20 {
compatible = "adi,adv7180";
reg = <0x20>;
};
};
&ldb {
status = "okay";
lvds-channel@0 {
crtcs = <&ipu1 0>, <&ipu1 1>;
};
};
&pcie {
reset-gpio = <&gpio1 29 0>;
status = "okay";
eth1: sky2@8 { /* MAC/PHY on bus 8 */
compatible = "marvell,sky2";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_3>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_1>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_1>;
disable-over-current;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usb_h1_vbus>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_2>;
cd-gpios = <&gpio7 0 0>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};

View File

@ -0,0 +1,263 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -117,6 +117,15 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6dl-sabresd.dtb \
imx6dl-wandboard.dtb \
imx6q-arm2.dtb \
+ imx6q-gw51xx.dtb \
+ imx6q-gw52xx.dtb \
+ imx6q-gw53xx.dtb \
+ imx6q-gw54xx.dtb \
+ imx6q-gw5400-a.dtb \
+ imx6dl-gw51xx.dtb \
+ imx6dl-gw52xx.dtb \
+ imx6dl-gw53xx.dtb \
+ imx6dl-gw54xx.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -212,6 +212,30 @@
MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1
>;
};
+
+ /* No strobe */
+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
+ fsl,pins = <
+ MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
+ MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
+ MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
};
i2c1 {
@@ -230,6 +254,12 @@
MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
>;
};
+ pinctrl_i2c2_2: i2c2grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
};
i2c3 {
@@ -239,6 +269,12 @@
MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
>;
};
+ pinctrl_i2c3_2: i2c3grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6Q_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
};
uart1 {
@@ -248,6 +284,12 @@
MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
+ pinctrl_uart1_2: uart1grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
};
uart2 {
@@ -257,6 +299,21 @@
MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
>;
};
+ pinctrl_uart2_3: uart2grp-3 {
+ fsl,pins = <
+ MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_3: uart3grp-3 {
+ fsl,pins = <
+ MX6Q_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6Q_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
};
uart4 {
@@ -267,6 +324,15 @@
>;
};
};
+
+ uart5 {
+ pinctrl_uart5_1: uart5grp-1 {
+ fsl,pins = <
+ MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+ };
usbotg {
pinctrl_usbotg_1: usbotggrp-1 {
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -37,6 +37,18 @@
compatible = "fsl,imx6dl-iomuxc";
reg = <0x020e0000 0x4000>;
+ /* shared pinctrl settings */
+ audmux {
+ pinctrl_audmux_1: audmux-1 {
+ fsl,pins = <
+ MX6DL_PAD_SD2_DAT0__AUD4_RXD 0x80000000
+ MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
+ MX6DL_PAD_SD2_DAT2__AUD4_TXD 0x80000000
+ MX6DL_PAD_SD2_DAT3__AUD4_TXC 0x80000000
+ >;
+ };
+ };
+
enet {
pinctrl_enet_1: enetgrp-1 {
fsl,pins = <
@@ -105,6 +117,59 @@
};
};
+ gpmi-nand {
+ /* No strobe */
+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
+ fsl,pins = <
+ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
+ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
+ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6DL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_2: i2c2grp-2 {
+ fsl,pins = <
+ MX6DL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+ };
+
+ i2c3 {
+ pinctrl_i2c3_2: i2c3grp-2 {
+ fsl,pins = <
+ MX6DL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6DL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+ };
+
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
@@ -112,6 +177,30 @@
MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
+ pinctrl_uart1_2: uart1grp-2 {
+ fsl,pins = <
+ MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_3: uart2grp-3 {
+ fsl,pins = <
+ MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_3: uart3grp-3 {
+ fsl,pins = <
+ MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
};
uart4 {
@@ -123,7 +212,22 @@
};
};
+ uart5 {
+ pinctrl_uart5_1: uart5grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+ };
+
usbotg {
+ pinctrl_usbotg_1: usbotggrp-1 {
+ fsl,pins = <
+ MX6DL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
pinctrl_usbotg_2: usbotggrp-2 {
fsl,pins = <
MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059

View File

@ -1,135 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6dl-sabresd.dtb \
imx6dl-wandboard.dtb \
imx6q-arm2.dtb \
+ imx6q-gw5400-a.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -98,6 +98,14 @@
MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
>;
};
+
+ pinctrl_audmux_3: audmux-3 {
+ fsl,pins = <
+ MX6Q_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
+ MX6Q_PAD_EIM_D25__AUD5_RXC 0x80000000
+ MX6Q_PAD_DISP0_DAT18__AUD5_TXFS 0x80000000
+ >;
+ };
};
ecspi1 {
@@ -212,6 +220,30 @@
MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1
>;
};
+
+ /* No strobe */
+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
+ fsl,pins = <
+ MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
+ MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
+ MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
};
i2c1 {
@@ -230,6 +262,12 @@
MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
>;
};
+ pinctrl_i2c2_2: i2c2grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
};
i2c3 {
@@ -239,6 +277,12 @@
MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
>;
};
+ pinctrl_i2c3_2: i2c3grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6Q_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
};
uart1 {
@@ -248,6 +292,12 @@
MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
+ pinctrl_uart1_2: uart1grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
};
uart2 {
@@ -257,6 +307,21 @@
MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
>;
};
+ pinctrl_uart2_2: uart2grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_1: uart3grp-1 {
+ fsl,pins = <
+ MX6Q_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+ MX6Q_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+ >;
+ };
};
uart4 {
@@ -267,6 +332,15 @@
>;
};
};
+
+ uart5 {
+ pinctrl_uart5_1: uart5grp-1 {
+ fsl,pins = <
+ MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+ };
usbotg {
pinctrl_usbotg_1: usbotggrp-1 {

View File

@ -1,10 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6dl-wandboard.dtb \
imx6q-arm2.dtb \
imx6q-gw5400-a.dtb \
+ imx6q-gw54xx.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \

View File

@ -1,161 +0,0 @@
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -105,6 +105,95 @@
};
};
+ gpmi-nand {
+ pinctrl_gpmi_nand_1: gpmi-nand-1 {
+ fsl,pins = <
+ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
+ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
+ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ MX6DL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+ >;
+ };
+
+ /* No strobe */
+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
+ fsl,pins = <
+ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
+ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
+ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6DL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_1: i2c2grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6DL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ >;
+ };
+ pinctrl_i2c2_2: i2c2grp-2 {
+ fsl,pins = <
+ MX6DL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+ };
+
+ i2c3 {
+ pinctrl_i2c3_1: i2c3grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6DL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+ pinctrl_i2c3_2: i2c3grp-2 {
+ fsl,pins = <
+ MX6DL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6DL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+ };
+
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
@@ -112,6 +201,36 @@
MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
+ pinctrl_uart1_2: uart1grp-2 {
+ fsl,pins = <
+ MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+ pinctrl_uart2_2: uart2grp-2 {
+ fsl,pins = <
+ MX6DL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1
+ MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_1: uart3grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
};
uart4 {
@@ -122,6 +241,15 @@
>;
};
};
+
+ uart5 {
+ pinctrl_uart5_1: uart5grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+ };
usbotg {
pinctrl_usbotg_2: usbotggrp-2 {
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -119,6 +119,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6q-arm2.dtb \
imx6q-gw5400-a.dtb \
imx6q-gw54xx.dtb \
+ imx6dl-gw51xx.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \

View File

@ -1,57 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -120,6 +120,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6q-gw5400-a.dtb \
imx6q-gw54xx.dtb \
imx6dl-gw51xx.dtb \
+ imx6dl-gw52xx.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -37,6 +37,18 @@
compatible = "fsl,imx6dl-iomuxc";
reg = <0x020e0000 0x4000>;
+ /* shared pinctrl settings */
+ audmux {
+ pinctrl_audmux_1: audmux-1 {
+ fsl,pins = <
+ MX6DL_PAD_SD2_DAT0__AUD4_RXD 0x80000000
+ MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
+ MX6DL_PAD_SD2_DAT2__AUD4_TXD 0x80000000
+ MX6DL_PAD_SD2_DAT3__AUD4_TXC 0x80000000
+ >;
+ };
+ };
+
enet {
pinctrl_enet_1: enetgrp-1 {
fsl,pins = <
@@ -222,6 +234,12 @@
MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1
>;
};
+ pinctrl_uart2_3: uart2grp-3 {
+ fsl,pins = <
+ MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
};
uart3 {
@@ -252,6 +270,12 @@
};
usbotg {
+ pinctrl_usbotg_1: usbotggrp-1 {
+ fsl,pins = <
+ MX6DL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
pinctrl_usbotg_2: usbotggrp-2 {
fsl,pins = <
MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059

View File

@ -1,10 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -121,6 +121,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6q-gw54xx.dtb \
imx6dl-gw51xx.dtb \
imx6dl-gw52xx.dtb \
+ imx6dl-gw53xx.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \

View File

@ -40,7 +40,11 @@ VENTANA_DTS:= \
imx6dl-gw51xx \
imx6dl-gw52xx \
imx6dl-gw53xx \
imx6q-gw5400-a \
imx6q-gw54xx
imx6dl-gw54xx \
imx6q-gw51xx \
imx6q-gw52xx \
imx6q-gw53xx \
imx6q-gw54xx \
imx6q-gw5400-a
$(eval $(call Profile,VENTANA))