ath79: add Embedded Wireless Balin Platform
Add the Embedded Wireless "Balin" platform, it is in ar71xx too SoC: QCA AR9344 or AR9350 RAM: DDR2-RAM 64MBytes Flash: SPI-NOR 16MBytes WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n Ethernet: 3 x 10/100 Mb/s USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up PCIe: MiniPCIe - 1 x lane PCIe 1.2 Button: 1 x Reset-Button UART: 1 x Normal, 1 x High-Speed JTAG: 1 x EJTAG LED: 1 x Green Power/Status LED GPIO: 10 x Input/Output multiplexed The module comes already with the current vanilla OpenWrt firmware. To update, use "sysupgrade -n --force <image>" image directly in vendor firmware. This resets the existing configurations back to default! Signed-off-by: Catrinel Catrinescu <cc@80211.de> [indent, led function+color properties, fix partition unit-address, re-enable pcie port, mention button+led in commit message] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
parent
8ac8c09f5e
commit
24d455d1d0
130
target/linux/ath79/dts/ar9344_embeddedwireless_balin.dts
Normal file
130
target/linux/ath79/dts/ar9344_embeddedwireless_balin.dts
Normal file
|
@ -0,0 +1,130 @@
|
||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
|
||||||
|
#include "ar9344.dtsi"
|
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/input/input.h>
|
||||||
|
#include <dt-bindings/leds/common.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "Embedded Wireless Balin";
|
||||||
|
compatible = "embeddedwireless,balin", "qca,ar9344";
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
stdout-path = "serial0:115200n8";
|
||||||
|
};
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
led-boot = &led_system;
|
||||||
|
led-failsafe = &led_system;
|
||||||
|
led-running = &led_system;
|
||||||
|
led-upgrade = &led_system;
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
led_system: led-0 {
|
||||||
|
label = "green:system";
|
||||||
|
color = <LED_COLOR_ID_GREEN>;
|
||||||
|
function = LED_FUNCTION_POWER;
|
||||||
|
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||||
|
default-state = "on";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
keys {
|
||||||
|
compatible = "gpio-keys";
|
||||||
|
|
||||||
|
reset {
|
||||||
|
linux,code = <KEY_RESTART>;
|
||||||
|
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
|
||||||
|
debounce-interval = <60>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&ref {
|
||||||
|
clock-frequency = <40000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&spi {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
flash@0 {
|
||||||
|
compatible = "jedec,spi-nor";
|
||||||
|
reg = <0>;
|
||||||
|
spi-max-frequency = <50000000>;
|
||||||
|
|
||||||
|
partitions {
|
||||||
|
compatible = "fixed-partitions";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
partition@0 {
|
||||||
|
label = "u-boot";
|
||||||
|
reg = <0x000000 0x040000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@40000 {
|
||||||
|
label = "u-boot-env";
|
||||||
|
reg = <0x040000 0x010000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@50000 {
|
||||||
|
compatible = "denx,uimage";
|
||||||
|
label = "firmware";
|
||||||
|
reg = <0x050000 0xfa0000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@ff0000 {
|
||||||
|
label = "art";
|
||||||
|
reg = <0xff0000 0x010000>;
|
||||||
|
read-only;
|
||||||
|
|
||||||
|
compatible = "nvmem-cells";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
calibration_art_1000: calibration_data@1000 {
|
||||||
|
reg = <0x1000 0x440>;
|
||||||
|
};
|
||||||
|
|
||||||
|
macaddr_art_1002: macaddr@1002 {
|
||||||
|
reg = <0x1002 0x6>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&builtin_switch {
|
||||||
|
/delete-property/qca,phy4-mii-enable;
|
||||||
|
};
|
||||||
|
|
||||||
|
ð1 {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
nvmem-cells = <&macaddr_art_1002>;
|
||||||
|
nvmem-cell-names = "mac-address";
|
||||||
|
mac-address-increment-byte = <3>;
|
||||||
|
mac-address-increment = <0x40>;
|
||||||
|
|
||||||
|
gmac-config {
|
||||||
|
device = <&gmac>;
|
||||||
|
switch-phy-swap = <0>;
|
||||||
|
switch-only-mode = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&wmac {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
nvmem-cells = <&macaddr_art_1002>, <&calibration_art_1000>;
|
||||||
|
nvmem-cell-names = "mac-address", "calibration";
|
||||||
|
};
|
||||||
|
|
||||||
|
&pcie {
|
||||||
|
status = "okay";
|
||||||
|
};
|
|
@ -265,6 +265,10 @@ ath79_setup_interfaces()
|
||||||
ucidef_add_switch "switch0" \
|
ucidef_add_switch "switch0" \
|
||||||
"0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
|
"0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
|
||||||
;;
|
;;
|
||||||
|
embeddedwireless,balin)
|
||||||
|
ucidef_add_switch "switch0" \
|
||||||
|
"0@eth0" "5:lan:1" "4:lan:2" "3:wan"
|
||||||
|
;;
|
||||||
embeddedwireless,dorin)
|
embeddedwireless,dorin)
|
||||||
ucidef_add_switch "switch0" \
|
ucidef_add_switch "switch0" \
|
||||||
"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
|
"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
|
||||||
|
|
|
@ -1028,6 +1028,15 @@ define Device/elecom_wrc-300ghbk2-i
|
||||||
endef
|
endef
|
||||||
TARGET_DEVICES += elecom_wrc-300ghbk2-i
|
TARGET_DEVICES += elecom_wrc-300ghbk2-i
|
||||||
|
|
||||||
|
define Device/embeddedwireless_balin
|
||||||
|
SOC := ar9344
|
||||||
|
DEVICE_VENDOR := Embedded Wireless
|
||||||
|
DEVICE_MODEL := Balin
|
||||||
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
||||||
|
IMAGE_SIZE := 16000k
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += embeddedwireless_balin
|
||||||
|
|
||||||
define Device/embeddedwireless_dorin
|
define Device/embeddedwireless_dorin
|
||||||
SOC := ar9331
|
SOC := ar9331
|
||||||
DEVICE_VENDOR := Embedded Wireless
|
DEVICE_VENDOR := Embedded Wireless
|
||||||
|
|
Loading…
Reference in New Issue
Block a user