imx6: add flexcan support
backport upstream changes to 3.10: - 0060-flexcan.patch: - add flexcan pinctrl and devicetree config - 0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch - fix a clock issue - 0062-ARM-i.MX6q-fix-the-wrong-parent-of-can_root-clock.patch - fix a clock issue Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39033
This commit is contained in:
Luka Perkov
parent
bda5d40721
commit
2bbd43d065
92
target/linux/imx6/patches-3.10/0060-flexcan.patch
Normal file
92
target/linux/imx6/patches-3.10/0060-flexcan.patch
Normal file
|
|
@ -0,0 +1,92 @@
|
|||
--- a/arch/arm/boot/dts/imx6q.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6q.dtsi
|
||||
@@ -163,6 +163,31 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ flexcan1 {
|
||||
+ pinctrl_flexcan1_1: flexcan1grp-1 {
|
||||
+ fsl,pins = <
|
||||
+ MX6Q_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
|
||||
+ MX6Q_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
|
||||
+ >;
|
||||
+ };
|
||||
+
|
||||
+ pinctrl_flexcan1_2: flexcan1grp-2 {
|
||||
+ fsl,pins = <
|
||||
+ MX6Q_PAD_GPIO_7__FLEXCAN1_TX 0x80000000
|
||||
+ MX6Q_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
|
||||
+ >;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ flexcan2 {
|
||||
+ pinctrl_flexcan2_1: flexcan2grp-1 {
|
||||
+ fsl,pins = <
|
||||
+ MX6Q_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
|
||||
+ MX6Q_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
|
||||
+ >;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
gpmi-nand {
|
||||
pinctrl_gpmi_nand_1: gpmi-nand-1 {
|
||||
fsl,pins = <
|
||||
--- a/arch/arm/boot/dts/imx6qdl.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
|
||||
@@ -292,13 +292,21 @@
|
||||
};
|
||||
|
||||
can1: flexcan@02090000 {
|
||||
+ compatible = "fsl,imx6q-flexcan";
|
||||
reg = <0x02090000 0x4000>;
|
||||
interrupts = <0 110 0x04>;
|
||||
+ clocks = <&clks 108>, <&clks 109>;
|
||||
+ clock-names = "ipg", "per";
|
||||
+ status = "disabled";
|
||||
};
|
||||
|
||||
can2: flexcan@02094000 {
|
||||
+ compatible = "fsl,imx6q-flexcan";
|
||||
reg = <0x02094000 0x4000>;
|
||||
interrupts = <0 111 0x04>;
|
||||
+ clocks = <&clks 110>, <&clks 111>;
|
||||
+ clock-names = "ipg", "per";
|
||||
+ status = "disabled";
|
||||
};
|
||||
|
||||
gpt: gpt@02098000 {
|
||||
--- a/arch/arm/boot/dts/imx6dl.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6dl.dtsi
|
||||
@@ -80,6 +80,31 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ flexcan1 {
|
||||
+ pinctrl_flexcan1_1: flexcan1grp-1 {
|
||||
+ fsl,pins = <
|
||||
+ MX6DL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
|
||||
+ MX6DL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
|
||||
+ >;
|
||||
+ };
|
||||
+
|
||||
+ pinctrl_flexcan1_2: flexcan1grp-2 {
|
||||
+ fsl,pins = <
|
||||
+ MX6DL_PAD_GPIO_7__FLEXCAN1_TX 0x80000000
|
||||
+ MX6DL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
|
||||
+ >;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ flexcan2 {
|
||||
+ pinctrl_flexcan2_1: flexcan2grp-1 {
|
||||
+ fsl,pins = <
|
||||
+ MX6DL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
|
||||
+ MX6DL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
|
||||
+ >;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
uart1 {
|
||||
pinctrl_uart1_1: uart1grp-1 {
|
||||
fsl,pins = <
|
||||
|
|
@ -0,0 +1,37 @@
|
|||
From 1a3e5173f5e72cbf7f0c8927b33082e361c16d72 Mon Sep 17 00:00:00 2001
|
||||
From: Marc Kleine-Budde <mkl@pengutronix.de>
|
||||
Date: Mon, 25 Nov 2013 22:15:20 +0100
|
||||
Subject: [PATCH] can: flexcan: use correct clock as base for bit rate
|
||||
calculation
|
||||
|
||||
The flexcan IP core uses the peripheral clock ("per") as basic clock for the
|
||||
bit timing calculation. However the driver uses the the wrong clock ("ipg").
|
||||
This leads to wrong bit rates if the rates on both clock are different.
|
||||
|
||||
This patch fixes the problem by using the correct clock for the bit rate
|
||||
calculation.
|
||||
|
||||
Cc: linux-stable <stable@vger.kernel.org>
|
||||
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
||||
---
|
||||
drivers/net/can/flexcan.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/drivers/net/can/flexcan.c
|
||||
+++ b/drivers/net/can/flexcan.c
|
||||
@@ -1025,7 +1025,6 @@ static int flexcan_probe(struct platform
|
||||
err = PTR_ERR(clk_ipg);
|
||||
goto failed_clock;
|
||||
}
|
||||
- clock_freq = clk_get_rate(clk_ipg);
|
||||
|
||||
clk_per = devm_clk_get(&pdev->dev, "per");
|
||||
if (IS_ERR(clk_per)) {
|
||||
@@ -1033,6 +1032,7 @@ static int flexcan_probe(struct platform
|
||||
err = PTR_ERR(clk_per);
|
||||
goto failed_clock;
|
||||
}
|
||||
+ clock_freq = clk_get_rate(clk_per);
|
||||
}
|
||||
|
||||
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
|
|
@ -0,0 +1,25 @@
|
|||
From 9b3d423707c3b1f6633be1be7e959623e10c596b Mon Sep 17 00:00:00 2001
|
||||
From: Jiada Wang <jiada_wang@mentor.com>
|
||||
Date: Wed, 30 Oct 2013 04:25:51 -0700
|
||||
Subject: [PATCH] ARM: i.MX6q: fix the wrong parent of can_root clock
|
||||
|
||||
instead of pll3_usb_otg the parent of can_root clock
|
||||
should be pll3_60m.
|
||||
|
||||
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
|
||||
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
||||
---
|
||||
arch/arm/mach-imx/clk-imx6q.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/arch/arm/mach-imx/clk-imx6q.c
|
||||
+++ b/arch/arm/mach-imx/clk-imx6q.c
|
||||
@@ -442,7 +442,7 @@ int __init mx6q_clocks_init(void)
|
||||
clk[asrc_podf] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
|
||||
clk[spdif_pred] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
|
||||
clk[spdif_podf] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
|
||||
- clk[can_root] = imx_clk_divider("can_root", "pll3_usb_otg", base + 0x20, 2, 6);
|
||||
+ clk[can_root] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
|
||||
clk[ecspi_root] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
|
||||
clk[gpu2d_core_podf] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
|
||||
clk[gpu3d_core_podf] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
|
||||
Loading…
Reference in New Issue
Block a user