remove 2.6.28 support, we never really used it

SVN-Revision: 18156
This commit is contained in:
Florian Fainelli 2009-10-25 21:13:46 +00:00
parent 7100c1efd9
commit 338490bd50
13 changed files with 0 additions and 812 deletions

View File

@ -1,95 +0,0 @@
From a9f65413f9ea81ef2208da66a3db9cb8a9020eef Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Fri, 18 Jul 2008 15:53:08 +0200
Subject: [PATCH] [MIPS] BCM63XX: Add Broadcom 63xx CPU definitions.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
arch/mips/kernel/cpu-probe.c | 25 +++++++++++++++++++++++++
arch/mips/mm/tlbex.c | 4 ++++
arch/mips/include/asm/cpu.h | 7 +++++++
3 files changed, 36 insertions(+), 0 deletions(-)
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -154,6 +154,9 @@ void __init check_wait(void)
case CPU_25KF:
case CPU_PR4450:
case CPU_BCM3302:
+ case CPU_BCM6338:
+ case CPU_BCM6348:
+ case CPU_BCM6358:
cpu_wait = r4k_wait;
break;
@@ -864,6 +867,7 @@ static inline void cpu_probe_broadcom(st
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
+ /* same as PRID_IMP_BCM6338 */
case PRID_IMP_BCM3302:
c->cputype = CPU_BCM3302;
__cpu_name[cpu] = "Broadcom BCM3302";
@@ -872,6 +876,26 @@ static inline void cpu_probe_broadcom(st
c->cputype = CPU_BCM4710;
__cpu_name[cpu] = "Broadcom BCM4710";
break;
+ case PRID_IMP_BCM6345:
+ c->cputype = CPU_BCM6345;
+ __cpu_name[cpu] = "Broadcom BCM6345";
+ break;
+ case PRID_IMP_BCM6348:
+ c->cputype = CPU_BCM6348;
+ __cpu_name[cpu] = "Broadcom BCM6348";
+ break;
+ case PRID_IMP_BCM4350:
+ switch (c->processor_id & 0xf0) {
+ case PRID_REV_BCM6358:
+ c->cputype = CPU_BCM6358;
+ __cpu_name[cpu] = "Broadcom BCM6358";
+ break;
+ default:
+ c->cputype = CPU_UNKNOWN;
+ __cpu_name[cpu] = "Broadcom BCM63xx";
+ break;
+ }
+ break;
}
}
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -317,6 +317,10 @@ static void __cpuinit build_tlb_write_en
case CPU_BCM3302:
case CPU_BCM4710:
case CPU_LOONGSON2:
+ case CPU_BCM6338:
+ case CPU_BCM6345:
+ case CPU_BCM6348:
+ case CPU_BCM6358:
if (m4kc_tlbp_war())
uasm_i_nop(p);
tlbw(p);
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -112,6 +112,12 @@
#define PRID_IMP_BCM4710 0x4000
#define PRID_IMP_BCM3302 0x9000
+#define PRID_IMP_BCM6338 0x9000
+#define PRID_IMP_BCM6345 0x8000
+#define PRID_IMP_BCM6348 0x9100
+#define PRID_IMP_BCM4350 0xA000
+#define PRID_REV_BCM6358 0x0010
+#define PRID_REV_BCM6368 0x0030
/*
* Definitions for 7:0 on legacy processors
@@ -198,6 +204,7 @@ enum cpu_type_enum {
CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
CPU_AU1000, CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500,
CPU_AU1550, CPU_PR4450, CPU_BCM3302, CPU_BCM4710,
+ CPU_BCM6338, CPU_BCM6345, CPU_BCM6348, CPU_BCM6358,
/*
* MIPS64 class processors

View File

@ -1,122 +0,0 @@
From 0713aadd2a4e543b69022aa40bdec3e1dc5bc1e5 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Mon, 18 Aug 2008 13:56:57 +0200
Subject: [PATCH] [MIPS] BCM63XX: Add support for Broadcom 63xx CPUs.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
arch/mips/Kconfig | 16 +
arch/mips/Makefile | 7 +
arch/mips/bcm63xx/Kconfig | 9 +
arch/mips/bcm63xx/Makefile | 2 +
arch/mips/bcm63xx/clk.c | 220 ++++++
arch/mips/bcm63xx/cpu.c | 245 +++++++
arch/mips/bcm63xx/cs.c | 144 ++++
arch/mips/bcm63xx/early_printk.c | 30 +
arch/mips/bcm63xx/gpio.c | 98 +++
arch/mips/bcm63xx/irq.c | 253 +++++++
arch/mips/bcm63xx/prom.c | 43 ++
arch/mips/bcm63xx/setup.c | 108 +++
arch/mips/bcm63xx/timer.c | 205 ++++++
arch/mips/include/asm/fixmap.h | 4 +
arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h | 11 +
arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 314 +++++++++
arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h | 10 +
arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 14 +
arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 93 +++
arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 15 +
arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 728 ++++++++++++++++++++
arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h | 11 +
.../asm-mips/mach-bcm63xx/cpu-feature-overrides.h | 51 ++
arch/mips/include/asm/mach-bcm63xx/gpio.h | 52 ++
arch/mips/include/asm/mach-bcm63xx/war.h | 25 +
25 files changed, 2708 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/bcm63xx/Kconfig
create mode 100644 arch/mips/bcm63xx/Makefile
create mode 100644 arch/mips/bcm63xx/clk.c
create mode 100644 arch/mips/bcm63xx/cpu.c
create mode 100644 arch/mips/bcm63xx/cs.c
create mode 100644 arch/mips/bcm63xx/early_printk.c
create mode 100644 arch/mips/bcm63xx/gpio.c
create mode 100644 arch/mips/bcm63xx/irq.c
create mode 100644 arch/mips/bcm63xx/prom.c
create mode 100644 arch/mips/bcm63xx/setup.c
create mode 100644 arch/mips/bcm63xx/timer.c
create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h
create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
create mode 100644 arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
create mode 100644 arch/mips/include/asm/mach-bcm63xx/gpio.h
create mode 100644 arch/mips/include/asm/mach-bcm63xx/war.h
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -60,6 +60,21 @@ config BCM47XX
help
Support for BCM47XX based boards
+config BCM63XX
+ bool "Broadcom 63xx based boards"
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
+ select SWAP_IO_SPACE
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for BCM63XX based boards
+
config MIPS_COBALT
bool "Cobalt Server"
select CEVT_R4K
@@ -599,6 +614,7 @@ endchoice
source "arch/mips/alchemy/Kconfig"
source "arch/mips/basler/excite/Kconfig"
+source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/emma/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -553,6 +553,13 @@ cflags-$(CONFIG_BCM47XX) += -I$(srctree)
load-$(CONFIG_BCM47XX) := 0xffffffff80001000
#
+# Broadcom BCM63XX boards
+#
+core-$(CONFIG_BCM63XX) += arch/mips/bcm63xx/
+cflags-$(CONFIG_BCM63XX) += -Iarch/mips/include/asm/mach-bcm63xx/
+load-$(CONFIG_BCM63XX) := 0xffffffff80010000
+
+#
# SNI RM
#
core-$(CONFIG_SNI_RM) += arch/mips/sni/
--- a/arch/mips/include/asm/fixmap.h
+++ b/arch/mips/include/asm/fixmap.h
@@ -67,11 +67,15 @@ enum fixed_addresses {
* the start of the fixmap, and leave one page empty
* at the top of mem..
*/
+#ifdef CONFIG_BCM63XX
+#define FIXADDR_TOP ((unsigned long)(long)(int)0xff000000)
+#else
#if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX)
#define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000))
#else
#define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000)
#endif
+#endif
#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)

View File

@ -1,66 +0,0 @@
From 6c489656b09998ed6a6f857e01ccf630e29358dd Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Fri, 18 Jul 2008 19:35:55 +0200
Subject: [PATCH] [MIPS] BCM63XX: Add serial driver for bcm63xx integrated UART.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
arch/mips/bcm63xx/Makefile | 1 +
arch/mips/bcm63xx/dev-uart.c | 41 +
drivers/serial/Kconfig | 19 +
drivers/serial/Makefile | 1 +
drivers/serial/bcm63xx_uart.c | 890 ++++++++++++++++++++++
include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h | 6 +
include/linux/serial_core.h | 2 +
7 files changed, 960 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/bcm63xx/dev-uart.c
create mode 100644 drivers/serial/bcm63xx_uart.c
create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1372,4 +1372,23 @@ config SPORT_BAUD_RATE
default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
+config SERIAL_BCM63XX
+ tristate "bcm63xx serial port support"
+ select SERIAL_CORE
+ depends on BCM63XX
+ help
+ If you have a bcm63xx CPU, you can enable its onboard
+ serial port by enabling this options.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bcm963xx_uart.
+
+config SERIAL_BCM63XX_CONSOLE
+ bool "Console on bcm63xx serial port"
+ depends on SERIAL_BCM63XX
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have enabled the serial port on the bcm63xx CPU
+ you can make it the console by answering Y to this option.
+
endmenu
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711
obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
+obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -158,6 +158,8 @@
/* SH-SCI */
#define PORT_SCIFA 83
+#define PORT_BCM63XX 83
+
#ifdef __KERNEL__
#include <linux/compiler.h>

View File

@ -1,33 +0,0 @@
From 2a7fa2dbbf68650644f807a50cc2d84ca30835c1 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Sun, 21 Sep 2008 04:47:13 +0200
Subject: [PATCH] [MIPS] BCM63XX: Add PCI support.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
arch/mips/bcm63xx/Kconfig | 2 +
arch/mips/bcm63xx/setup.c | 2 +
arch/mips/pci/Makefile | 2 +
arch/mips/pci/fixup-bcm63xx.c | 21 +++
arch/mips/pci/ops-bcm63xx.c | 179 +++++++++++++++++++++++
arch/mips/pci/pci-bcm63xx.c | 178 ++++++++++++++++++++++
arch/mips/pci/pci-bcm63xx.h | 27 ++++
include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h | 6 +
8 files changed, 417 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/pci/fixup-bcm63xx.c
create mode 100644 arch/mips/pci/ops-bcm63xx.c
create mode 100644 arch/mips/pci/pci-bcm63xx.c
create mode 100644 arch/mips/pci/pci-bcm63xx.h
create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o
obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
+obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
+ ops-bcm63xx.o
#
# These are still pretty much in the old state, watch, go blind.

View File

@ -1,43 +0,0 @@
From b17597be763621ba63534fda6e1ea0a802be2087 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Fri, 18 Jul 2008 21:18:51 +0200
Subject: [PATCH] [MIPS] BCM63XX: Add PCMCIA & Cardbus support.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
arch/mips/bcm63xx/Makefile | 1 +
arch/mips/bcm63xx/dev-pcmcia.c | 135 +++++
drivers/pcmcia/Kconfig | 4 +
drivers/pcmcia/Makefile | 1 +
drivers/pcmcia/bcm63xx_pcmcia.c | 521 ++++++++++++++++++++
drivers/pcmcia/bcm63xx_pcmcia.h | 65 +++
include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h | 13 +
7 files changed, 740 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/bcm63xx/dev-pcmcia.c
create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.c
create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.h
create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -192,6 +192,10 @@ config PCMCIA_AU1X00
tristate "Au1x00 pcmcia support"
depends on SOC_AU1X00 && PCMCIA
+config PCMCIA_BCM63XX
+ tristate "bcm63xx pcmcia support"
+ depends on BCM63XX && PCMCIA
+
config PCMCIA_SA1100
tristate "SA1100 support"
depends on ARM && ARCH_SA1100 && PCMCIA
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_
obj-$(CONFIG_M32R_PCC) += m32r_pcc.o
obj-$(CONFIG_M32R_CFC) += m32r_cfc.o
obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o
+obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o
obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
obj-$(CONFIG_OMAP_CF) += omap_cf.o

View File

@ -1,56 +0,0 @@
From f7416412febd7efc1d33c7506c81265719368667 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Mon, 21 Jul 2008 14:58:19 +0200
Subject: [PATCH] [MIPS] BCM63XX: Add USB OHCI support.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
arch/mips/bcm63xx/Kconfig | 6 +
arch/mips/bcm63xx/Makefile | 1 +
arch/mips/bcm63xx/dev-usb-ohci.c | 50 ++++++
drivers/usb/host/ohci-bcm63xx.c | 159 ++++++++++++++++++++
drivers/usb/host/ohci-hcd.c | 5 +
drivers/usb/host/ohci.h | 7 +-
.../asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 +
7 files changed, 233 insertions(+), 1 deletions(-)
create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
create mode 100644 drivers/usb/host/ohci-bcm63xx.c
create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1047,6 +1047,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER usb_hcd_pnx4008_driver
#endif
+#ifdef CONFIG_BCM63XX
+#include "ohci-bcm63xx.c"
+#define PLATFORM_DRIVER ohci_hcd_bcm63xx_driver
+#endif
+
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_CPU_SUBTYPE_SH7763)
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -536,6 +536,11 @@ static inline struct usb_hcd *ohci_to_hc
#define big_endian_mmio(ohci) 0 /* only little endian */
#endif
+#if defined(CONFIG_MIPS) && defined(CONFIG_BCM63XX)
+#define readl_be(addr) __raw_readl((__force unsigned *)addr)
+#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
+#endif
+
/*
* Big-endian read/write functions are arch-specific.
* Other arches can be added if/when they're needed.
@@ -646,7 +651,7 @@ static inline u32 hc32_to_cpup (const st
* some big-endian SOC implementations. Same thing happens with PSW access.
*/
-#ifdef CONFIG_PPC_MPC52xx
+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX)
#define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)
#else
#define big_endian_frame_no_quirk(ohci) 0

View File

@ -1,58 +0,0 @@
From 2940d1996c86c4c4dd7a82214f846d0c0b707165 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Mon, 21 Jul 2008 18:24:42 +0200
Subject: [PATCH] [MIPS] BCM63XX: Add USB EHCI support.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
arch/mips/bcm63xx/Kconfig | 2 +
arch/mips/bcm63xx/Makefile | 1 +
arch/mips/bcm63xx/dev-usb-ehci.c | 50 +++++++
drivers/usb/host/ehci-bcm63xx.c | 152 ++++++++++++++++++++
drivers/usb/host/ehci-hcd.c | 5 +
drivers/usb/host/ehci.h | 5 +
.../asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 +
7 files changed, 221 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
create mode 100644 drivers/usb/host/ehci-bcm63xx.c
create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1036,6 +1036,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ixp4xx_ehci_driver
#endif
+#ifdef CONFIG_BCM63XX
+#include "ehci-bcm63xx.c"
+#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
#error "missing bus glue for ehci-hcd"
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -621,6 +621,11 @@ ehci_port_speed(struct ehci_hcd *ehci, u
#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
#endif
+#if defined(CONFIG_MIPS) && defined(CONFIG_BCM63XX)
+#define readl_be(addr) __raw_readl((__force unsigned *)addr)
+#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
+#endif
+
static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
__u32 __iomem * regs)
{
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -44,7 +44,7 @@ config USB_EHCI_HCD
config USB_EHCI_ROOT_HUB_TT
bool "Root Hub Transaction Translators"
- depends on USB_EHCI_HCD
+ depends on USB_EHCI_HCD && !BCM63XX
---help---
Some EHCI chips have vendor-specific extensions to integrate
transaction translators, so that no OHCI or UHCI companion

View File

@ -1,48 +0,0 @@
From 49aa7ffcd9bd2d9a0af99fced7b8511160dbf345 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Sun, 21 Sep 2008 03:43:26 +0200
Subject: [PATCH] [MIPS] BCM63XX: Add integrated ethernet mac support.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
arch/mips/bcm63xx/Makefile | 1 +
arch/mips/bcm63xx/dev-enet.c | 158 ++
drivers/net/Kconfig | 9 +
drivers/net/Makefile | 1 +
drivers/net/bcm63xx_enet.c | 1894 ++++++++++++++++++++++
drivers/net/bcm63xx_enet.h | 294 ++++
include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h | 45 +
7 files changed, 2402 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/bcm63xx/dev-enet.c
create mode 100644 drivers/net/bcm63xx_enet.c
create mode 100644 drivers/net/bcm63xx_enet.h
create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1987,6 +1987,15 @@ config ATL2
To compile this driver as a module, choose M here. The module
will be called atl2.
+config BCM63XX_ENET
+ tristate "Broadcom 63xx internal mac support"
+ depends on BCM63XX
+ select MII
+ select PHYLIB
+ help
+ This driver supports the ethernet MACs in the Broadcom 63xx
+ MIPS chipset family (BCM63XX).
+
source "drivers/net/fs_enet/Kconfig"
endif # NET_ETHERNET
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -126,6 +126,7 @@ obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
obj-$(CONFIG_B44) += b44.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
obj-$(CONFIG_NE_H8300) += ne-h8300.o
+obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
obj-$(CONFIG_AX88796) += ax88796.o
obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o

View File

@ -1,38 +0,0 @@
From 7eefcb968019804e024c8243e28afb1eebd674a2 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Sun, 21 Sep 2008 02:20:53 +0200
Subject: [PATCH] [MIPS] BCM63XX: Add integrated ethernet PHY support for phylib.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
drivers/net/phy/Kconfig | 6 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/bcm63xx.c | 132 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 139 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/phy/bcm63xx.c
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -62,6 +62,12 @@ config BROADCOM_PHY
Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
and BCM5482 PHYs.
+config BCM63XX_PHY
+ tristate "Drivers for Broadcom 63xx SOCs internal PHY"
+ depends on BCM63XX
+ ---help---
+ Currently supports the 6348 and 6358 PHYs.
+
config ICPLUS_PHY
tristate "Drivers for ICPlus PHYs"
---help---
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o
obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
+obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o

View File

@ -1,29 +0,0 @@
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
# PARISC Architecture
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -747,6 +747,16 @@ config TXX9_WDT
help
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+config BCM63XX_WDT
+ tristate "Broadcom BCM63xx hardware watchdog"
+ depends on BCM63XX
+ help
+ Watchdog driver for the built in watchdog hardware in Broadcom
+ BCM63xx SoC.
+
+ To compile thi driver as a loadable module, choose M here.
+ The module will be called bcm63xx_wdt.
+
# PARISC Architecture
# POWERPC Architecture

View File

@ -1,73 +0,0 @@
From e734ace5baa04e0e8af1d4483475fbd6bd2b32a1 Mon Sep 17 00:00:00 2001
From: Axel Gembe <ago@bastart.eu.org>
Date: Mon, 12 May 2008 18:54:09 +0200
Subject: [PATCH] bcm963xx: flashmap support
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
---
drivers/mtd/maps/Kconfig | 7 +++++++
drivers/mtd/maps/Makefile | 1 +
drivers/mtd/redboot.c | 13 ++++++++++---
3 files changed, 18 insertions(+), 3 deletions(-)
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -257,6 +257,13 @@ config MTD_ALCHEMY
help
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
+config MTD_BCM963XX
+ tristate "BCM963xx Flash device"
+ depends on MIPS && BCM63XX
+ help
+ Flash memory access on BCM963xx boards. Currently only works with
+ RedBoot and CFE.
+
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -39,7 +39,7 @@ static inline int redboot_checksum(struc
return 1;
}
-static int parse_redboot_partitions(struct mtd_info *master,
+int parse_redboot_partitions(struct mtd_info *master,
struct mtd_partition **pparts,
unsigned long fis_origin)
{
@@ -162,6 +162,14 @@ static int parse_redboot_partitions(stru
goto out;
}
+ if (!fis_origin) {
+ for (i = 0; i < numslots; i++) {
+ if (!strncmp(buf[i].name, "RedBoot", 8)) {
+ fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
+ }
+ }
+ }
+
for (i = 0; i < numslots; i++) {
struct fis_list *new_fl, **prev;
@@ -184,9 +192,8 @@ static int parse_redboot_partitions(stru
new_fl->img = &buf[i];
if (fis_origin) {
buf[i].flash_base -= fis_origin;
- } else {
- buf[i].flash_base &= master->size-1;
}
+ buf[i].flash_base &= (master->size << 1) - 1;
/* I'm sure the JFFS2 code has done me permanent damage.
* I now think the following is _normal_
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -61,3 +61,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
+obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o

View File

@ -1,26 +0,0 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -229,6 +229,13 @@ config SPI_XILINX
See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
Product Specification document (DS464) for hardware details.
+config SPI_BCM63XX
+ tristate "Broadcom BCM63xx SPI controller"
+ depends on BCM63XX
+ select SPI_BITBANG
+ help
+ SPI driver for the Broadcom BCM63xx SPI controller.
+
#
# Add new SPI master controllers in alphabetical order above this line
#
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24x
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
+obj-$(CONFIG_SPI_BCM63XX) += bcm63xx_spi.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)

View File

@ -1,125 +0,0 @@
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -7,6 +7,7 @@
#include <linux/string.h>
#include <linux/syscalls.h>
#include <linux/utime.h>
+#include <linux/vmalloc.h>
static __initdata char *message;
static void __init error(char *x)
@@ -475,6 +476,69 @@ static void __init flush_window(void)
outcnt = 0;
}
+#include <linux/LzmaDecode.h>
+static int __init lzma_unzip(void)
+{
+ unsigned int i; /* temp value */
+ unsigned int lc; /* literal context bits */
+ unsigned int lp; /* literal pos state bits */
+ unsigned int pb; /* pos state bits */
+ unsigned int osize; /* uncompressed size */
+ unsigned char *workspace;
+ unsigned char* outputbuffer;
+ unsigned int outsizeProcessed = 0;
+ int workspace_size;
+ int res;
+
+ // lzma args
+ i = get_byte();
+ lc = i % 9, i = i / 9;
+ lp = i % 5, pb = i / 5;
+
+ // skip dictionary size
+ for (i = 0; i < 4; i++)
+ get_byte();
+
+ /* read the lower half of uncompressed size in the header */
+ osize = ((unsigned int)get_byte()) +
+ ((unsigned int)get_byte() << 8) +
+ ((unsigned int)get_byte() << 16) +
+ ((unsigned int)get_byte() << 24);
+
+ /* skip rest of the header (upper half of uncompressed size) */
+ for (i = 0; i < 4; i++)
+ get_byte();
+
+ workspace_size = ((LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp))) * sizeof(CProb)) + 100;
+ printk( KERN_NOTICE "initramfs: LZMA lc=%d,lp=%d,pb=%d,origSize=%d\n",
+ lc,lp,pb,osize);
+ outputbuffer = vmalloc(osize);
+ if (outputbuffer == 0) {
+ printk(KERN_ERR "initramfs: Couldn't allocate lzma output buffer\n");
+ return -1;
+ }
+
+ workspace = vmalloc(workspace_size);
+ if (workspace == NULL) {
+ printk(KERN_ERR "initramfs: Couldn't allocate lzma workspace\n");
+ return -1;
+ }
+
+ res = LzmaDecode(workspace, workspace_size, lc, lp, pb, inbuf + inptr, insize - inptr, outputbuffer, osize, &outsizeProcessed);
+ if( res != 0 ) {
+ panic( KERN_ERR "initramfs: Lzma decode failure\n");
+ return -1;
+ }
+
+ flush_buffer(outputbuffer, outsizeProcessed);
+ inptr = insize;
+
+ vfree(outputbuffer);
+ vfree(workspace);
+ state = Reset;
+ return 0;
+}
+
static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only)
{
int written;
@@ -509,12 +573,28 @@ static char * __init unpack_to_rootfs(ch
inptr = 0;
outcnt = 0; /* bytes in output buffer */
bytes_out = 0;
- crc = (ulg)0xffffffffL; /* shift register contents */
- makecrc();
- gunzip();
- if (state != Reset)
+ if( inbuf[0] == 037 && ((inbuf[1] == 0213) || (inbuf[1] == 0236)))
+ {
+ printk( KERN_NOTICE "detected gzip initramfs\n");
+ crc = (ulg)0xffffffffL; /* shift register contents */
+ makecrc();
+ gunzip();
+ if (state != Reset)
error("junk in gzipped archive");
- this_header = saved_offset + inptr;
+ }
+ else if(!memcmp(inbuf+1, "\x00\x00\x80\x00", 4)) /* FIXME: hardcoded dictionary size */
+ {
+ printk( KERN_NOTICE "detected lzma initramfs\n");
+ lzma_unzip();
+ }
+ else
+ {
+ // skip forward ?
+ crc = (ulg)0xffffffffL; /* shift register contents */
+ makecrc();
+ gunzip();
+ }
+ this_header = saved_offset + inptr;
buf += inptr;
len -= inptr;
}
--- a/scripts/gen_initramfs_list.sh
+++ b/scripts/gen_initramfs_list.sh
@@ -287,7 +287,7 @@ if [ ! -z ${output_file} ]; then
if [ "${is_cpio_compressed}" = "compressed" ]; then
cat ${cpio_tfile} > ${output_file}
else
- cat ${cpio_tfile} | gzip -f -9 - > ${output_file}
+ lzma e -lc1 -lp2 -pb2 ${cpio_tfile} ${output_file}
fi
[ -z ${cpio_file} ] && rm ${cpio_tfile}
fi