Add some build fixes for kernel 2.6.21 and the infineon amazon target.

Now it compiles with the new toolchain.
These are mostly backports from mainline linux and newer linux kernels from openwrt.

SVN-Revision: 18345
This commit is contained in:
Hauke Mehrtens 2009-11-08 21:56:59 +00:00
parent ae0457f76a
commit 343e9ffa20
8 changed files with 224 additions and 6 deletions

View File

@ -74,6 +74,7 @@ CONFIG_MIPS=y
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_FPU_EMU is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_MIRAGE is not set

View File

@ -0,0 +1,150 @@
MIPS: allow disabling the kernel FPU emulator
This patch allows turning off the in-kernel Algorithmics
FPU emulator support, which allows one to save a couple of
precious blocks on an embedded system.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -938,6 +938,17 @@ config LIMITED_DMA
config MIPS_BONITO64
bool
+config MIPS_FPU_EMU
+ bool
+ default n
+ help
+ This option allows building a kernel with or without the Algorithmics
+ FPU emulator enabled. Turning off this option results in a kernel which
+ does not catch floating operations exceptions. Make sure that your toolchain
+ is configured to enable software floating point emulation in that case.
+
+ If unsure say Y here.
+
config MIPS_MSC
bool
--- a/arch/mips/math-emu/Makefile
+++ b/arch/mips/math-emu/Makefile
@@ -1,11 +1,12 @@
#
# Makefile for the Linux/MIPS kernel FPU emulation.
#
+obj-y := kernel_linkage.o dsemul.o cp1emu.o
-obj-y := cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
+obj-$(CONFIG_MIPS_FPU_EMU) += ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \
dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \
dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \
sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
- dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
+ dp_sqrt.o sp_sqrt.o
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -56,6 +56,12 @@
#endif
#define __mips 4
+/* Further private data for which no space exists in mips_fpu_struct */
+
+struct mips_fpu_emulator_stats fpuemustats;
+
+#ifdef CONFIG_MIPS_FPU_EMU
+
/* Function which emulates a floating point instruction. */
static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
@@ -66,10 +72,6 @@ static int fpux_emu(struct pt_regs *,
struct mips_fpu_struct *, mips_instruction);
#endif
-/* Further private data for which no space exists in mips_fpu_struct */
-
-struct mips_fpu_emulator_stats fpuemustats;
-
/* Control registers */
#define FPCREG_RID 0 /* $0 = revision id */
@@ -1277,3 +1279,10 @@ int fpu_emulator_cop1Handler(struct pt_r
return sig;
}
+#else
+int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
+ int has_fpu)
+{
+ return 0;
+}
+#endif /* CONFIG_MIPS_FPU_EMU */
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -112,6 +112,7 @@ int mips_dsemul(struct pt_regs *regs, mi
return SIGILL; /* force out of emulation loop */
}
+#ifdef CONFIG_MIPS_FPU_EMU
int do_dsemulret(struct pt_regs *xcp)
{
struct emuframe *fr;
@@ -167,3 +168,9 @@ int do_dsemulret(struct pt_regs *xcp)
return 1;
}
+#else
+int do_dsemulret(struct pt_regs *xcp)
+{
+ return 0;
+}
+#endif /* CONFIG_MIPS_FPU_EMU */
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -28,6 +28,7 @@
#define SIGNALLING_NAN 0x7ff800007ff80000LL
+#ifdef CONFIG_MIPS_FPU_EMU
void fpu_emulator_init_fpu(void)
{
static int first = 1;
@@ -111,4 +112,36 @@ int fpu_emulator_restore_context32(struc
return err;
}
-#endif
+#endif /* CONFIG_64BIT */
+#else
+
+void fpu_emulator_init_fpu(void)
+{
+ printk(KERN_INFO "FPU emulator disabled, make sure your toolchain"
+ "was compiled with software floating point support (soft-float)\n");
+ return;
+}
+
+int fpu_emulator_save_context(struct sigcontext __user *sc)
+{
+ return 0;
+}
+
+int fpu_emulator_restore_context(struct sigcontext __user *sc)
+{
+ return 0;
+}
+
+int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
+{
+ return 0;
+}
+
+int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
+{
+ return 0;
+}
+
+#ifdef CONFIG_64BIT
+#endif /* CONFIG_64BIT */
+#endif /* CONFIG_MIPS_FPU_EMU */

View File

@ -735,7 +735,7 @@
depends on IP_NF_MANGLE
--- a/net/ipv4/netfilter/Makefile
+++ b/net/ipv4/netfilter/Makefile
@@ -98,6 +98,7 @@ obj-$(CONFIG_IP_NF_MATCH_ADDRTYPE) += ip
@@ -97,6 +97,7 @@ obj-$(CONFIG_IP_NF_MATCH_ADDRTYPE) += ip
obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o
obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o
obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o

View File

@ -538,9 +538,9 @@
+module_exit(fini);
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -825,5 +825,22 @@ config IP_NF_TARGET_SET
To compile it as a module, choose M here. If unsure, say N.
@@ -684,5 +684,22 @@ config IP_NF_ARP_MANGLE
Allows altering the ARP packet payload: source and destination
hardware and network addresses.
+config IP_NF_TARGET_ROUTE
+ tristate 'ROUTE target support'
@ -563,7 +563,7 @@
--- a/net/ipv4/netfilter/Makefile
+++ b/net/ipv4/netfilter/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_EC
@@ -100,6 +100,7 @@ obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_EC
obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o
obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o

View File

@ -0,0 +1,29 @@
--- a/scripts/unifdef.c
+++ b/scripts/unifdef.c
@@ -206,7 +206,7 @@ static void done(void);
static void error(const char *);
static int findsym(const char *);
static void flushline(bool);
-static Linetype getline(void);
+static Linetype get_line(void);
static Linetype ifeval(const char **);
static void ignoreoff(void);
static void ignoreon(void);
@@ -512,7 +512,7 @@ process(void)
for (;;) {
linenum++;
- lineval = getline();
+ lineval = get_line();
trans_table[ifstate[depth]][lineval]();
debug("process %s -> %s depth %d",
linetype_name[lineval],
@@ -526,7 +526,7 @@ process(void)
* help from skipcomment().
*/
static Linetype
-getline(void)
+get_line(void)
{
const char *cp;
int cursym;

View File

@ -0,0 +1,21 @@
[MIPS] Fix computation of {PGD,PMD,PTE}_T_LOG2.
For the generation of asm-offset.h to work these need to be evaulatable
by gcc as a constant expression. This issue did exist for a while but
didn't bite because they're only in asm-offset.h for debugging purposes.
--- a/include/asm-mips/pgtable.h
+++ b/include/asm-mips/pgtable.h
@@ -168,9 +168,9 @@ static inline void pte_clear(struct mm_s
#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0)
#endif
-#define PGD_T_LOG2 ffz(~sizeof(pgd_t))
-#define PMD_T_LOG2 ffz(~sizeof(pmd_t))
-#define PTE_T_LOG2 ffz(~sizeof(pte_t))
+#define PGD_T_LOG2 (__builtin_ffs(sizeof(pgd_t)) - 1)
+#define PMD_T_LOG2 (__builtin_ffs(sizeof(pmd_t)) - 1)
+#define PTE_T_LOG2 (__builtin_ffs(sizeof(pte_t)) - 1)
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];

View File

@ -0,0 +1,17 @@
time: prevent the loop in timespec_add_ns() from being optimised away
Since some architectures don't support __udivdi3().
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -170,6 +170,10 @@ static inline void timespec_add_ns(struc
{
ns += a->tv_nsec;
while(unlikely(ns >= NSEC_PER_SEC)) {
+ /* The following asm() prevents the compiler from
+ * optimising this loop into a modulo operation. */
+ asm("" : "+r"(ns));
+
ns -= NSEC_PER_SEC;
a->tv_sec++;
}

View File

@ -11,7 +11,7 @@
#include <linux/types.h>
#ifdef __KERNEL__
@@ -224,4 +228,6 @@ struct itimerval {
@@ -228,4 +232,6 @@ struct itimerval {
*/
#define TIMER_ABSTIME 0x01