First stage of update for at91 devices to 2.6.25.10 kernel

SVN-Revision: 11631
This commit is contained in:
Hamish Guthrie 2008-07-04 16:05:00 +00:00
parent 385bcf948b
commit 34d362d1a7
9 changed files with 13959 additions and 1 deletions

View File

@ -11,7 +11,7 @@ BOARD:=at91
BOARDNAME:=Atmel AT91
FEATURES:=squashfs usb
LINUX_VERSION:=2.6.21.7
LINUX_VERSION:=2.6.25.10
include $(INCLUDE_DIR)/target.mk

View File

@ -0,0 +1,306 @@
# CONFIG_AEABI is not set
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_AT91=y
# CONFIG_ARCH_AT91CAP9 is not set
CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_AT91RM9200DK is not set
# CONFIG_ARCH_AT91SAM9260 is not set
# CONFIG_ARCH_AT91SAM9261 is not set
# CONFIG_ARCH_AT91SAM9263 is not set
# CONFIG_ARCH_AT91SAM9RL is not set
# CONFIG_ARCH_AT91X40 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_MSM7X00A is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_ORION is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARM=y
CONFIG_ARM_AT91_ETHER=m
CONFIG_ARM_THUMB=y
# CONFIG_ARPD is not set
# CONFIG_ARTHUR is not set
CONFIG_AT91_EARLY_DBGU=y
# CONFIG_AT91_EARLY_USART0 is not set
# CONFIG_AT91_EARLY_USART1 is not set
# CONFIG_AT91_EARLY_USART2 is not set
# CONFIG_AT91_EARLY_USART3 is not set
# CONFIG_AT91_EARLY_USART4 is not set
# CONFIG_AT91_EARLY_USART5 is not set
CONFIG_AT91_PMC_UNIT=y
# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
CONFIG_AT91_SPI=y
# CONFIG_AT91_SPIDEV is not set
CONFIG_AT91_TIMER_HZ=128
# CONFIG_ATMEL_PWM is not set
# CONFIG_ATMEL_SSC is not set
CONFIG_BASE_SMALL=0
# CONFIG_BINFMT_AOUT is not set
CONFIG_BITREVERSE=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_BONDING is not set
CONFIG_BOUNCE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_BT is not set
CONFIG_CLASSIC_RCU=y
CONFIG_CPU_32=y
CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_ARM920T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_DATAFLASH_ALWAYS_ADD_DEVICE is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DM9000 is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_E1000E_ENABLED is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
CONFIG_FRAME_POINTER=y
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_GPIO=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_IDE is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HW_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_HZ=128
# CONFIG_I2C is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_CRYPT_TKIP is not set
# CONFIG_IEEE80211_SOFTMAC is not set
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INPUT=y
CONFIG_LEDS=y
# CONFIG_LEDS_ALIX is not set
CONFIG_LEDS_CPU=y
# CONFIG_LEDS_GPIO is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
# CONFIG_LLC2 is not set
CONFIG_LOCALVERSION_AUTO=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
# CONFIG_MACH_AT91RM9200EK is not set
# CONFIG_MACH_ATEB9200 is not set
# CONFIG_MACH_CARMEVA is not set
# CONFIG_MACH_CHUB is not set
# CONFIG_MACH_CSB337 is not set
# CONFIG_MACH_CSB637 is not set
# CONFIG_MACH_ECBAT91 is not set
# CONFIG_MACH_HOMEMATIC is not set
# CONFIG_MACH_KAFA is not set
# CONFIG_MACH_KB9200 is not set
# CONFIG_MACH_ONEARM is not set
# CONFIG_MACH_PICOTUX2XX is not set
# CONFIG_MACH_SWEDATMS is not set
# CONFIG_MACH_TT9200 is not set
CONFIG_MACH_VLINK=y
CONFIG_MII=m
CONFIG_MMC=m
CONFIG_MMC_AT91=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_MTD_AT91_DATAFLASH=y
CONFIG_MTD_AT91_PARTS=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_MTD_BLOCK2MTD is not set
# CONFIG_MTD_CFI is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CHAR=y
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
# CONFIG_MTD_ROOTFS_SPLIT is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_NET_PKTGEN is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_RTSP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_RTSP is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NO_IOPORT is not set
# CONFIG_NVRAM is not set
# CONFIG_OUTER_CACHE is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PPPOATM is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_RTC_LIB=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SDIO_UART is not set
# CONFIG_SERIAL_8250 is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIO=y
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=y
CONFIG_SERIO_SERPORT=y
CONFIG_SLABINFO=y
# CONFIG_SMC91X is not set
# CONFIG_SOUND is not set
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_SSB_POSSIBLE=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_TICK_ONESHOT=y
CONFIG_UID16=y
CONFIG_USB=m
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB_LIBUSUAL=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SPEEDTOUCH is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_UEAGLEATM is not set
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_VGASTATE is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_VIDEO_DEV is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_W1 is not set
# CONFIG_WATCHDOG is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_XIP_KERNEL is not set
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,229 @@
--- linux-2.6.25.10.n/arch/arm/mach-at91/Kconfig 2008-07-04 13:07:01.000000000 +0200
+++ linux-2.6.25.10/arch/arm/mach-at91/Kconfig 2008-07-03 13:44:35.000000000 +0200
@@ -151,6 +151,12 @@
help
Select this if you are using Toptech's TT9200 board.
+config MACH_VLINK
+ bool "Figment Design Labs VersaLink"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using FDL's VersaLink board
+
endif
# ----------------------------------------------------------
--- linux-2.6.25.10.n/arch/arm/mach-at91/Makefile 2008-07-04 13:05:05.000000000 +0200
+++ linux-2.6.25.10/arch/arm/mach-at91/Makefile 2008-07-03 13:44:35.000000000 +0200
@@ -29,6 +29,7 @@
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
obj-$(CONFIG_MACH_CHUB) += board-chub.o
+obj-$(CONFIG_MACH_VLINK) += board-vlink.o
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
obj-$(CONFIG_MACH_HOMEMATIC) += board-homematic.o
obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
--- linux-2.6.25.10.n/arch/arm/mach-at91/board-vlink.c 2008-07-04 13:06:19.000000000 +0200
+++ linux-2.6.25.10/arch/arm/mach-at91/board-vlink.c 2008-07-04 12:45:48.000000000 +0200
@@ -0,0 +1,201 @@
+/*
+ * linux/arch/arm/mach-at91/board-vlink.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006,2007 Guthrie Consulting
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
+
+#include "generic.h"
+
+
+static void __init vlink_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PC14, AT91_PIN_PC15);
+
+ /* Setup serial ports */
+
+ /* DBGU on ttyS0. (RX and TX only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DSR, DTR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS
+ | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART0 on ttys2. (Rx, Tx, CTS, RTS, DTR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US0, 2, ATMEL_UART_CTS
+ | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART3 on ttyS3. (Rx, Tx, CTS, RTS, DTR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS
+ | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART2 on ttyS4. (Rx and Tx only) */
+ at91_register_uart(AT91RM9200_ID_US2, 4, 0);
+
+ /* Console on ttyS0 (ie DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init vlink_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata vlink_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata vlink_usbh_data = {
+ .ports = 1,
+};
+
+/*
+static struct at91_udc_data __initdata vlink_udc_data = {
+ .vbus_pin = AT91_PIN_PD4,
+ .pullup_pin = AT91_PIN_PD5,
+};
+*/
+
+static struct at91_mmc_data __initdata vlink_mmc_data = {
+// .det_pin = AT91_PIN_PB27,
+ .slot_b = 0,
+ .wire4 = 1,
+// .wp_pin = AT91_PIN_PA17,
+};
+
+static struct spi_board_info vlink_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 3,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+#endif
+};
+
+/*static struct at91_gpio_led vlink_leds[] = {
+ {
+ .name = "led0",
+ .gpio = AT91_PIN_PC14,
+ .trigger = "heartbeat",
+ },
+ {
+ .name = "led1",
+ .gpio = AT91_PIN_PC15,
+ .trigger = "timer",
+ }
+};
+*/
+
+static void __init vlink_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&vlink_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&vlink_usbh_data);
+ /* USB Device */
+// at91_add_device_udc(&vlink_udc_data);
+// at91_set_multi_drive(vlink_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
+ /* I2C */
+// at91_add_device_i2c();
+ /* SPI */
+ at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices));
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ /* DataFlash card */
+// at91_set_gpio_output(AT91_PIN_PB22, 0);
+#else
+ /* MMC */
+// at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
+ at91_add_device_mmc(0, &vlink_mmc_data);
+#endif
+ /* LEDs */
+// at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
+
+/* Other LED's */
+ at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1
+ at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1
+ at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
+ at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
+ at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
+ at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
+
+/* SIM Cards */
+ at91_set_gpio_output(AT91_PIN_PB9, 1); // ENBSC3
+ at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
+ at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
+
+/* GSM Module Control */
+ at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
+
+/* Test jig presence detection */
+ at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT
+
+/* Power indicator */
+ at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND
+
+/* USB Device control */
+ at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX
+ at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
+ at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
+
+}
+
+MACHINE_START(VLINK, "FDL VersaLink")
+ /* Maintainer: Guthrie Consulting */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = vlink_map_io,
+ .init_irq = vlink_init_irq,
+ .init_machine = vlink_board_init,
+MACHINE_END

View File

@ -0,0 +1,42 @@
Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
===================================================================
--- linux-2.6.22.19.orig/drivers/mtd/devices/at91_dataflash.c
+++ linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
@@ -175,7 +175,7 @@ static struct mtd_partition static_parti
};
#endif
-static const char *part_probes[] = { "cmdlinepart", NULL, };
+static const char *part_probes[] = { "cmdlinepart", "at91part", NULL, };
#endif
Index: linux-2.6.22.19/drivers/mtd/Kconfig
===================================================================
--- linux-2.6.22.19.orig/drivers/mtd/Kconfig
+++ linux-2.6.22.19/drivers/mtd/Kconfig
@@ -168,6 +168,12 @@ config MTD_AFS_PARTS
the partition map from the children of the flash node,
as described in Documentation/powerpc/booting-without-of.txt.
+config MTD_AT91_PARTS
+ tristate "Atmel AT91 partitioning support"
+ depends on MTD_PARTITIONS && ARCH_AT91RM9200 && AT91_SPI
+ ---help---
+ Atmel AT91 partitioning support
+
comment "User Modules And Translation Layers"
config MTD_CHAR
Index: linux-2.6.22.19/drivers/mtd/Makefile
===================================================================
--- linux-2.6.22.19.orig/drivers/mtd/Makefile
+++ linux-2.6.22.19/drivers/mtd/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
+obj-$(CONFIG_MTD_AT91_PARTS) += at91part.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_CHAR) += mtdchar.o

View File

@ -0,0 +1,161 @@
--- linux-2.6.25.10.old/drivers/serial/atmel_serial.c 2008-07-04 14:21:12.000000000 +0200
+++ linux-2.6.25.10/drivers/serial/atmel_serial.c 2008-07-04 14:55:37.000000000 +0200
@@ -214,6 +214,34 @@
at91_set_gpio_value(AT91_PIN_PA21, 0);
else
at91_set_gpio_value(AT91_PIN_PA21, 1);
+
+ /*
+ * FDL VersaLink adds GPIOS to provide full modem
+ * control on USART 0 - Drive DTR and RI pins manually
+ */
+ if (mctrl & TIOCM_DTR)
+ at91_set_gpio_value(AT91_PIN_PB6, 0);
+ else
+ at91_set_gpio_value(AT91_PIN_PB6, 1);
+ if (mctrl & TIOCM_RI)
+ at91_set_gpio_value(AT91_PIN_PB7, 0);
+ else
+ at91_set_gpio_value(AT91_PIN_PB7, 1);
+ }
+
+ /*
+ * FDL VersaLink adds GPIOS to provide full modem control on
+ * USART 3 - Drive DTR and RI pins manually
+ */
+ if (port->mapbase == AT91RM9200_BASE_US3) {
+ if (mctrl & TIOCM_DTR)
+ at91_set_gpio_value(AT91_PIN_PB29, 0);
+ else
+ at91_set_gpio_value(AT91_PIN_PB29, 1);
+ if (mctrl & TIOCM_RI)
+ at91_set_gpio_value(AT91_PIN_PB2, 0);
+ else
+ at91_set_gpio_value(AT91_PIN_PB2, 1);
}
}
#endif
@@ -251,8 +279,10 @@
/*
* The control signals are active low.
*/
- if (!(status & ATMEL_US_DCD))
- ret |= TIOCM_CD;
+
+ if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
+ if (!(status & ATMEL_US_DCD))
+ ret |= TIOCM_CD;
if (!(status & ATMEL_US_CTS))
ret |= TIOCM_CTS;
if (!(status & ATMEL_US_DSR))
@@ -260,6 +290,16 @@
if (!(status & ATMEL_US_RI))
ret |= TIOCM_RI;
+ /*
+ * Read the GPIO's for the FDL VersaLink special case
+ */
+ if (port->mapbase == AT91RM9200_BASE_US0)
+ if (!(at91_get_gpio_value(AT91_PIN_PA19)))
+ ret |= TIOCM_CD;
+ if (port->mapbase == AT91RM9200_BASE_US3)
+ if (!(at91_get_gpio_value(AT91_PIN_PA24)))
+ ret |= TIOCM_CD;
+
return ret;
}
@@ -453,6 +493,34 @@
}
/*
+ * USART0 DCD Interrupt handler
+ */
+
+static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ int status = at91_get_gpio_value(irq);
+
+ uart_handle_dcd_change(port, !(status));
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * USART3 DCD Interrupt handler
+ */
+
+static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ int status = at91_get_gpio_value(irq);
+
+ uart_handle_dcd_change(port, !(status));
+
+ return IRQ_HANDLED;
+}
+
+/*
* receive interrupt handler.
*/
static void
@@ -815,6 +883,23 @@
return retval;
}
+ if (port->mapbase == AT91RM9200_BASE_US0) {
+ retval = request_irq(AT91_PIN_PA19, atmel_u0_DCD_interrupt, 0, "atmel_serial", port);
+ if (retval) {
+ printk("atmel_serial: atmel_startup - Can't get u0DCD irq\n");
+ free_irq(port->irq, port);
+ return retval;
+ }
+ }
+ if (port->mapbase == AT91RM9200_BASE_US3) {
+ retval = request_irq(AT91_PIN_PA24, atmel_u3_DCD_interrupt, 0, "atmel_serial", port);
+ if (retval) {
+ printk("atmel_serial: atmel_startup - Can't get u3DCD irq\n");
+ free_irq(port->irq, port);
+ return retval;
+ }
+ }
+
/*
* Initialize DMA (if necessary)
*/
@@ -834,6 +919,10 @@
kfree(atmel_port->pdc_rx[0].buf);
}
free_irq(port->irq, port);
+ if (port->mapbase == AT91RM9200_BASE_US0)
+ free_irq(AT91_PIN_PA19, port);
+ if (port->mapbase == AT91RM9200_BASE_US3)
+ free_irq(AT91_PIN_PA24, port);
return -ENOMEM;
}
pdc->dma_addr = dma_map_single(port->dev,
@@ -873,7 +962,11 @@
retval = atmel_open_hook(port);
if (retval) {
free_irq(port->irq, port);
- return retval;
+ if (port->mapbase == AT91RM9200_BASE_US0)
+ free_irq(AT91_PIN_PA19, port);
+ if (port->mapbase == AT91RM9200_BASE_US3)
+ free_irq(AT91_PIN_PA24, port);
+ return retval;
}
}
@@ -947,6 +1040,10 @@
* Free the interrupt
*/
free_irq(port->irq, port);
+ if (port->mapbase == AT91RM9200_BASE_US0)
+ free_irq(AT91_PIN_PA19, port);
+ if (port->mapbase == AT91RM9200_BASE_US3)
+ free_irq(AT91_PIN_PA24, port);
/*
* If there is a specific "close" function (to unregister

View File

@ -0,0 +1,34 @@
--- linux-2.6.25.10.old/arch/arm/mach-at91/at91rm9200_devices.c 2008-07-04 15:04:13.000000000 +0200
+++ linux-2.6.25.10/arch/arm/mach-at91/at91rm9200_devices.c 2008-07-04 15:11:44.000000000 +0200
@@ -981,7 +981,15 @@
* We need to drive the pin manually. Default is off (RTS is active low).
*/
at91_set_gpio_output(AT91_PIN_PA21, 1);
- }
+ }
+ if (pins & ATMEL_UART_DTR)
+ at91_set_gpio_output(AT91_PIN_PB6, 1); /* DTR0 */
+ if (pins & ATMEL_UART_RI)
+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* RI0 */
+ if (pins & ATMEL_UART_DCD) {
+ at91_set_gpio_input(AT91_PIN_PA19, 1); /* DCD0 */
+ at91_set_deglitch(AT91_PIN_PA19, 1);
+ }
}
static struct resource uart1_resources[] = {
@@ -1119,6 +1127,14 @@
at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
+ if (pins & ATMEL_UART_DTR)
+ at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
+ if (pins & ATMEL_UART_RI)
+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* RI0 */
+ if (pins & ATMEL_UART_DCD) {
+ at91_set_gpio_input(AT91_PIN_PA24, 1); /* DCD0 */
+ at91_set_deglitch(AT91_PIN_PA24, 1);
+ }
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */

View File

@ -0,0 +1,30 @@
Index: linux-2.6.22.19/drivers/net/arm/at91_ether.c
===================================================================
--- linux-2.6.22.19.orig/drivers/net/arm/at91_ether.c
+++ linux-2.6.22.19/drivers/net/arm/at91_ether.c
@@ -146,6 +146,7 @@ static void update_linkspeed(struct net_
struct at91_private *lp = netdev_priv(dev);
unsigned int bmsr, bmcr, lpa, mac_cfg;
unsigned int speed, duplex;
+ unsigned long timeout = jiffies + HZ;
if (!mii_link_ok(&lp->mii)) { /* no link */
netif_carrier_off(dev);
@@ -158,8 +159,15 @@ static void update_linkspeed(struct net_
read_phy(lp->phy_address, MII_BMSR, &bmsr);
read_phy(lp->phy_address, MII_BMCR, &bmcr);
if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */
- if (!(bmsr & BMSR_ANEGCOMPLETE))
- return; /* Do nothing - another interrupt generated when negotiation complete */
+ while (!(bmsr & BMSR_ANEGCOMPLETE)) {
+ if (time_after(jiffies, timeout)) {
+ printk("at91_ether: Auto-negotiate timeout\n");
+ return;
+ }
+ read_phy(lp->phy_address, MII_BMSR, &bmsr);
+ read_phy(lp->phy_address, MII_BMCR, &bmcr);
+ cpu_relax();
+ }
read_phy(lp->phy_address, MII_LPA, &lpa);
if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100;

View File

@ -0,0 +1,20 @@
Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
===================================================================
--- linux-2.6.22.19.orig/drivers/mtd/devices/at91_dataflash.c
+++ linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
@@ -163,12 +163,12 @@ static struct mtd_partition static_parti
.mask_flags = MTD_WRITEABLE, /* read-only */
},
{
- .name = "kernel",
+ .name = "knlroot",
.offset = MTDPART_OFS_NXTBLK,
- .size = 5 * 32 * 8 * 1056, /* 5 sectors */
+ .size = 0x320400,
},
{
- .name = "filesystem",
+ .name = "jffs2",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL, /* rest = 26 sectors */
}