ramips: add support for dir810l and asus rp-n53

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37780
This commit is contained in:
John Crispin 2013-08-14 18:15:35 +00:00
parent 632a3e3a79
commit 36e3424fa5
7 changed files with 298 additions and 1 deletions

View File

@ -74,6 +74,9 @@ case $board in
dir-620-d1)
set_wifi_led "d-link:green:wifi"
;;
dir-810l)
ucidef_set_led_default "power" "POWER" "dlink:green:power" "1"
;;
esr-9753)
set_wifi_led "rt2800pci-phy0::radio"
;;
@ -135,6 +138,10 @@ case $board in
wnce2001)
set_wifi_led "netgear:green:wlan"
;;
rp-n53)
ucidef_set_led_netdev "eth" "Network" "asus:white:back" "eth0"
set_wifi_led "asus:blue:wifi"
;;
esac
ucidef_commit_leds

View File

@ -197,7 +197,8 @@ ramips_setup_macs()
rt-n13u | \
hg255d | \
fonera20n)
fonera20n |
dir-810l)
lan_mac=$(mtd_get_mac_binary factory 40)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;

View File

@ -88,6 +88,9 @@ ramips_board_detect() {
*"DIR-645")
name="dir-645"
;;
*"DIR-810L")
name="dir-810l"
;;
*"DAP-1350")
name="dap-1350"
;;
@ -166,6 +169,9 @@ ramips_board_detect() {
*"PWH2004")
name="pwh2004"
;;
*"Asus RP-N53")
name="rp-n53"
;;
*"RT-G32 B1")
name="rt-g32-b1"
;;

View File

@ -36,6 +36,7 @@ platform_check_image() {
dir-615-d | \
dir-620-a1 | \
dir-620-d1 | \
dir-810l | \
dap-1350 | \
esr-9753 | \
f7c027 | \
@ -56,6 +57,7 @@ platform_check_image() {
omni-emb | \
omni-emb-hpm | \
psr-680w | \
rp-n53 | \
rt-g32-b1 | \
rt-n10-plus | \
rt-n15 | \

View File

@ -0,0 +1,127 @@
/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
model = "D-Link DIR-810L";
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "spi", "uartlite", "ephy";
ralink,gpiomux = "jtag", "mdio", "rgmii1", "rgmii1", "i2c", "wled";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l6405d";
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
factory5g: partition@50000 {
label = "factory5g";
reg = <0x50000 0x10000>;
read-only;
};
partition@60000 {
label = "Wolf_Config";
reg = <0x60000 0x10000>;
read-only;
};
partition@70000 {
label = "MyDlink";
reg = <0x70000 0x80000>;
read-only;
};
partition@e0000 {
label = "Jffs2";
reg = <0xe0000 0x80000>;
read-only;
};
partition@170000 {
label = "firmware";
reg = <0x170000 0x690000>;
};
};
};
};
ethernet@10100000 {
status = "okay";
};
gsw@10110000 {
status = "okay";
ralink,port4 = "ephy";
};
pcie@10140000 {
status = "okay";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x100>;
};
wps {
label = "wps";
gpios = <&gpio0 2 1>;
linux,code = <0x100>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "dlink:green:power";
gpios = <&gpio0 9 0>;
};
internet {
label = "asus:yellow:internet";
gpios = <&gpio0 12 0>;
};
status {
label = "asus:internet:status";
gpios = <&gpio0 13 0>;
};
};
};

View File

@ -0,0 +1,149 @@
/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "asus,rp-n53", "ralink,mt7620a-soc";
model = "Asus RP-N53";
chosen {
bootargs = "console=ttyS0,57600";
};
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "spi", "uartlite", "wled", "ephy", "i2c";
ralink,gpiomux = "jtag", "mdio", "rgmii1", "rgmii1";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
gpio1: gpio@638 {
status = "okay";
};
i2c@900 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l6405d";
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
codec {
compatible = "ralink,mt7620-audio";
};
ethernet@10100000 {
status = "okay";
};
gsw@10110000 {
status = "okay";
ralink,port4 = "ephy";
};
pcie@10140000 {
status = "okay";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
touch {
label = "touch";
gpios = <&gpio1 0 1>;
linux,code = <0x100>;
};
wps {
label = "wps";
gpios = <&gpio1 1 1>;
linux,code = <0x100>;
};
reset {
label = "reset";
gpios = <&gpio1 2 1>;
linux,code = <0x100>;
};
audio {
label = "audio";
gpios = <&gpio1 3 0>;
linux,code = <0x101>;
};
};
gpio-leds {
compatible = "gpio-leds";
backlight {
label = "asus:white:back";
gpios = <&gpio1 4 1>;
};
wifi0 {
label = "asus:blue:5g3";
gpios = <&gpio1 5 1>;
};
wifi1 {
label = "asus:blue:5g2";
gpios = <&gpio1 6 1>;
};
wifi2 {
label = "asus:blue:5g1";
gpios = <&gpio1 7 1>;
};
wifi3 {
label = "asus:blue:wifi";
gpios = <&gpio1 8 1>;
};
wifi4 {
label = "asus:blue:2g1";
gpios = <&gpio1 9 1>;
};
wifi5 {
label = "asus:blue:2g2";
gpios = <&gpio1 10 1>;
};
wifi6 {
label = "asus:blue:2g3";
gpios = <&gpio1 11 1>;
};
};
};

View File

@ -585,11 +585,16 @@ endif
Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53)
dlink810l_mtd_size=6881280
Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
ifeq ($(SUBTARGET),mt7620a)
define Image/Build/Profile/Default
$(call Image/Build/Profile/MT7620a,$(1))
$(call Image/Build/Profile/MT7620a_MT7610e,$(1))
$(call Image/Build/Profile/RP-N53,$(1))
$(call Image/Build/Profile/DIR-810L,$(1))
endef
endif