IXP4xx patches for NSLU2 and NAS100D

SVN-Revision: 5830
This commit is contained in:
Rod Whitby 2006-12-18 01:57:04 +00:00
parent 6f68289195
commit 3fa8a58011
12 changed files with 930 additions and 0 deletions

View File

@ -0,0 +1,36 @@
Submitted as http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3984/1
This patch fixes an error in the numbering of the disk LEDs on the
Linksys NSLU2. The error crept in because the physical location
of the LEDs has the Disk 2 LED *above* the Disk 1 LED.
Thanks to Gordon Farquharson for reporting this.
Signed-off-by: Rod Whitby <rod@whitby.id.au>
PATCH FOLLOWS
KernelVersion: 2.6.19
Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/nslu2.h
===================================================================
--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/nslu2.h
+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/nslu2.h
@@ -76,6 +76,7 @@
#define NSLU2_GPIO_BUZZ 4
#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
+
/* LEDs */
#define NSLU2_LED_RED NSLU2_GPIO0
@@ -84,8 +85,8 @@
#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED)
#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN)
-#define NSLU2_LED_DISK1 NSLU2_GPIO2
-#define NSLU2_LED_DISK2 NSLU2_GPIO3
+#define NSLU2_LED_DISK1 NSLU2_GPIO3
+#define NSLU2_LED_DISK2 NSLU2_GPIO2
#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2)
#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3)

View File

@ -0,0 +1,60 @@
Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
===================================================================
--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h
+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
@@ -100,6 +100,7 @@ struct mac_plat_info {
int phy_id; /* ID of the connected PHY (PCB/platform dependent) */
int rxq_id; /* Queue ID of the RX-free q*/
int txq_id; /* Where to push the outgoing packets */
+ unsigned char hwaddr[6]; /* Desired hardware address */
};
Index: linux-2.6.19/drivers/net/ixp4xx/mac_driver.c
===================================================================
--- linux-2.6.19.orig/drivers/net/ixp4xx/mac_driver.c
+++ linux-2.6.19/drivers/net/ixp4xx/mac_driver.c
@@ -189,6 +189,24 @@ static int ixmac_open (struct net_device
}
mac->rxq_pkt += RX_QUEUE_PREFILL;
+ /* printk(KERN_INFO "...Platform MAC=0x%02x%02x%02x%02x%02x%02x\n",
+ mac->plat->hwaddr[0],
+ mac->plat->hwaddr[1],
+ mac->plat->hwaddr[2],
+ mac->plat->hwaddr[3],
+ mac->plat->hwaddr[4],
+ mac->plat->hwaddr[5]
+ ); */
+ /* Only use platform or random if there's currently no device hw addr */
+ if (is_zero_ether_addr(dev->dev_addr)) {
+ if (is_zero_ether_addr(mac->plat->hwaddr)) {
+ random_ether_addr(dev->dev_addr);
+ dev->dev_addr[5] = mac->plat->phy_id;
+ }
+ else
+ memcpy(dev->dev_addr, mac->plat->hwaddr, 6);
+ }
+
mac_init(mac);
npe_mh_set_rxqid(npe, mac->plat, RX_DONE_QID);
mac_set_uniaddr(dev);
@@ -434,9 +452,15 @@ static int mac_probe(struct platform_dev
* following commands:
* "ip link set address 02:03:04:04:04:01 dev eth0"
* "ifconfig eth0 hw ether 02:03:04:04:04:07"
- */
- random_ether_addr(dev->dev_addr);
- dev->dev_addr[5] = plat->phy_id;
+ */
+/* Note: moved to ixmac_open to allow notifiers to run for compiled in modules
+ if (is_zero_ether_addr(plat->hwaddr)) {
+ random_ether_addr(dev->dev_addr);
+ dev->dev_addr[5] = plat->phy_id;
+ }
+ else
+ memcpy(dev->dev_addr, plat->hwaddr, 6);
+*/
printk(KERN_INFO IXMAC_NAME " driver " IXMAC_VERSION
": %s on %s with PHY[%d] initialized\n",

View File

@ -0,0 +1,414 @@
Index: linux-2.6.19/drivers/net/ixp4xx/Kconfig
===================================================================
--- linux-2.6.19.orig/drivers/net/ixp4xx/Kconfig
+++ linux-2.6.19/drivers/net/ixp4xx/Kconfig
@@ -11,6 +11,7 @@ config IXP4XX_NPE
tristate "IXP4xx NPE support"
depends on ARCH_IXP4XX
depends on NET_ETHERNET
+ select CRC16
help
The IXP4XX NPE driver supports the 3 CPU co-processors called
"Network Processing Engines" (NPE). It adds support fo downloading
@@ -18,7 +19,7 @@ config IXP4XX_NPE
More about this at: Documentation/networking/ixp4xx/README.
You can either use this OR the Intel Access Library (IAL)
-config IXP4XX_FW_LOAD
+config IXP4XX_NPE_FW_LOAD
bool "Use Firmware hotplug for Microcode download"
depends on IXP4XX_NPE
select HOTPLUG
@@ -28,6 +29,13 @@ config IXP4XX_FW_LOAD
/usr/lib/hotplug/firmware/NPE-[ABC]
see Documentation/firmware_class/hotplug-script
+config IXP4XX_NPE_FW_MTD
+ bool "Load firmware from an mtd partition"
+ depends on IXP4XX_NPE && MTD_IXP4XX
+ help
+ With this option, the driver will search for
+ the firmware into an MTD partition.
+
config IXP4XX_MAC
tristate "IXP4xx MAC support"
depends on IXP4XX_NPE
Index: linux-2.6.19/drivers/net/ixp4xx/Makefile
===================================================================
--- linux-2.6.19.orig/drivers/net/ixp4xx/Makefile
+++ linux-2.6.19/drivers/net/ixp4xx/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
+obj-$(CONFIG_IXP4XX_NPE_FW_MTD) += npe_ucode.o
ixp4xx_npe-objs := ucode_dl.o npe_mh.o
ixp4xx_mac-objs := mac_driver.o qmgr_eth.o phy.o
Index: linux-2.6.19/drivers/net/ixp4xx/npe_ucode.c
===================================================================
--- /dev/null
+++ linux-2.6.19/drivers/net/ixp4xx/npe_ucode.c
@@ -0,0 +1,185 @@
+/*
+ * Provide an NPE platform device for microcode handling
+ *
+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
+ *
+ * This file is released under the GPLv2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/firmware.h>
+#include <linux/mtd/mtd.h>
+
+#include <linux/ixp_npe.h>
+
+#define DL_MAGIC 0xfeedf00d
+#define DL_MAGIC_SWAP 0x0df0edfe
+
+#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
+ sizeof(struct dl_image))
+
+#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f)
+#define IMG_REV_MINOR(id) ((id) & 0x0f)
+#define IMG_FUNC(id) (((id) >> 16) & 0xff)
+#define IMG_NPE(id) (((id) >> 24) & 0x0f)
+#define IMG_IXP(id) (((id) >> 28) & 0x0f)
+
+static struct platform_driver ixp4xx_npe_ucode_driver;
+static unsigned char *partition_name = NULL;
+
+static void print_image_info(u32 id, u32 offset, u32 size)
+{
+ unsigned char idx;
+ const char *names[] = { "IXP425", "IXP465", "unknown" };
+
+ idx = IMG_IXP(id) < 2 ? IMG_IXP(id) : 2;
+
+ printk(KERN_INFO "npe: found at 0x%x, %s/NPE-%c func: %02x, rev: %x.%x, "
+ "size: %5d, id: %08x\n", offset, names[idx], IMG_NPE(id) + 'A',
+ IMG_FUNC(id), IMG_REV_MAJOR(id), IMG_REV_MINOR(id), size, id);
+}
+
+void npe_swap_image(struct dl_image *image)
+{
+ unsigned int i;
+
+ image->magic = swab32(image->magic);
+ image->id = swab32(image->id);
+ image->size = swab32(image->size);
+
+ for (i = 0; i < image->size; i++)
+ image->u.data[i] = swab32(image->u.data[i]);
+}
+
+static void npe_find_microcode(struct mtd_info *mtd)
+{
+ u32 buf;
+ u32 magic = htonl(DL_MAGIC);
+ u32 id, size;
+ size_t retlen;
+ int err;
+ unsigned int offset = 0;
+
+ printk("npe: searching for firmware...\n");
+
+ while (offset < mtd->size) {
+
+ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &buf);
+ offset += retlen;
+
+ if (buf != magic)
+ continue;
+
+ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &id);
+ offset += retlen;
+
+ if (id == magic)
+ break;
+
+ id = ntohl(id);
+
+ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &size);
+ offset += retlen;
+
+ size = (ntohl(size) * 4) + 12;
+
+ print_image_info(id, offset - 12, size);
+
+ if (size < 24000 && ( IMG_FUNC(id) == 0x01 || IMG_FUNC(id) == 0x00) ) { // XXX fix size/detection
+
+ struct dl_image *image = kmalloc(size, GFP_KERNEL);
+
+ /* we are going to load it, rewind offset */
+ offset -= 12;
+
+ if (image) {
+ err = mtd->read(mtd, offset, size, &retlen, (u_char *) image);
+
+ if (err == 0 && retlen == size) {
+ if (image->magic == DL_MAGIC_SWAP)
+ npe_swap_image(image);
+
+ store_npe_image(image, NULL);
+ } else {
+ printk(KERN_ERR "unable to read firmware\n");
+ }
+
+ kfree(image);
+ }
+
+ offset += size;
+ }
+ }
+}
+
+static void npe_flash_add(struct mtd_info *mtd)
+{
+ if (partition_name == NULL)
+ return;
+
+ if (strcmp(mtd->name, partition_name) == 0) {
+ npe_find_microcode(mtd);
+ }
+}
+
+static void npe_flash_remove(struct mtd_info *mtd) {
+}
+
+static struct mtd_notifier npe_flash_notifier = {
+ .add = npe_flash_add,
+ .remove = npe_flash_remove,
+};
+
+static int npe_ucode_probe(struct platform_device *pdev)
+{
+ struct npe_ucode_platform_data *data = pdev->dev.platform_data;
+
+ if (partition_name)
+ return -EEXIST;
+
+ if (data && data->mtd_partition) {
+ partition_name = data->mtd_partition;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int npe_ucode_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver ixp4xx_npe_ucode_driver = {
+ .driver = {
+ .name = "ixp4xx_npe_ucode",
+ .owner = THIS_MODULE,
+ },
+ .probe = npe_ucode_probe,
+ .remove = npe_ucode_remove,
+};
+
+static int __init npe_ucode_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&ixp4xx_npe_ucode_driver);
+ register_mtd_user(&npe_flash_notifier);
+
+ return ret;
+}
+
+static void __exit npe_ucode_exit(void)
+{
+ unregister_mtd_user(&npe_flash_notifier);
+ platform_driver_unregister(&ixp4xx_npe_ucode_driver);
+}
+
+module_init(npe_ucode_init);
+module_exit(npe_ucode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
Index: linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
===================================================================
--- linux-2.6.19.orig/drivers/net/ixp4xx/ucode_dl.c
+++ linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
@@ -16,6 +16,7 @@
#include <linux/firmware.h>
#include <linux/dma-mapping.h>
#include <linux/byteorder/swab.h>
+#include <linux/crc16.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -30,6 +31,12 @@
#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
sizeof(struct dl_image))
+#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f)
+#define IMG_REV_MINOR(id) ((id) & 0x0f)
+#define IMG_FUNC(id) (((id) >> 16) & 0xff)
+#define IMG_NPE(id) (((id) >> 24) & 0x0f)
+#define IMG_IXP(id) (((id) >> 28) & 0x0f)
+
#define BT_INSTR 0
#define BT_DATA 1
@@ -38,21 +45,6 @@ enum blk_type {
data,
};
-struct dl_block {
- u32 type;
- u32 offset;
-};
-
-struct dl_image {
- u32 magic;
- u32 id;
- u32 size;
- union {
- u32 data[0];
- struct dl_block block[0];
- } u;
-};
-
struct dl_codeblock {
u32 npe_addr;
u32 size;
@@ -134,23 +126,41 @@ struct device *get_npe_by_id(int id)
&id, match_by_npeid);
}
-static int store_npe_image(struct dl_image *image, struct device *dev)
+int store_npe_image(struct dl_image *image, struct device *dev)
{
struct dl_block *blk;
struct dl_codeblock *cb;
struct npe_info *npe;
- int ret=0;
+ int ret = 0;
+ u16 crc;
if (!dev) {
- dev = get_npe_by_id( (image->id >> 24) & 0xf);
- put_device(dev);
+ dev = get_npe_by_id(IMG_NPE(image->id));
+ if (dev)
+ put_device(dev);
+ // XXX shouldn't this put_device be outside if(!dev) ?
+ else
+ printk(KERN_ERR "npe: cannot find npe for image %x\n", IMG_NPE(image->id));
}
+
if (!dev)
return -ENODEV;
+ if (image->size > 24000) { // XXX fix max size
+ printk(KERN_ERR "npe: firmware too large\n");
+ return -EFBIG;
+ }
+
+ if (IMG_REV_MAJOR(image->id) != 2) {
+ printk(KERN_ERR "npe: only revision 2 is supported at this time\n");
+ return -EINVAL;
+ }
+
+ crc = crc16(0, (u8 *) image, IMG_SIZE(image));
+
npe = dev_get_drvdata(dev);
- if ( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
+ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
printk(KERN_INFO "Cowardly refusing to reload an Image "
"into the running %s\n", npe->plat->name);
return 0; /* indicate success anyway... */
@@ -173,9 +183,9 @@ static int store_npe_image(struct dl_ima
*(u32*)npe->img_info = cpu_to_be32(image->id);
npe_start(npe);
- printk(KERN_INFO "Image loaded to %s Func:%x, Rel: %x:%x, Status: %x\n",
+ printk(KERN_INFO "npe: firmware loaded to %s, func: %02x, rev: %x.%x, status: %x, crc: %x\n",
npe->plat->name, npe->img_info[1], npe->img_info[2],
- npe->img_info[3], npe_status(npe));
+ npe->img_info[3], npe_status(npe), crc);
return 0;
}
@@ -265,8 +275,7 @@ static ssize_t ucode_write(struct file *
static void npe_firmware_probe(struct device *dev)
{
-#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \
- && defined(MODULE)
+#ifdef CONFIG_IXP4XX_NPE_FW_LOADER
const struct firmware *fw_entry;
struct npe_info *npe = dev_get_drvdata(dev);
struct dl_image *image;
@@ -388,7 +397,7 @@ static int npe_probe(struct platform_dev
npe->plat = plat;
disable_npe_irq(npe);
- if (! (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN))
+ if (!(npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN))
npe_firmware_probe(&pdev->dev);
return 0;
@@ -464,3 +473,4 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
EXPORT_SYMBOL(get_npe_by_id);
+EXPORT_SYMBOL(store_npe_image);
Index: linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
===================================================================
--- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h
+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
@@ -86,6 +86,20 @@ struct ixp4xx_i2c_pins {
unsigned long scl_pin;
};
+struct dl_block {
+ u32 type;
+ u32 offset;
+};
+
+struct dl_image {
+ u32 magic;
+ u32 id;
+ u32 size;
+ union {
+ u32 data[0];
+ struct dl_block block[0];
+ } u;
+};
struct npe_plat_data {
const char *name;
int data_size;
@@ -103,6 +117,9 @@ struct mac_plat_info {
unsigned char hwaddr[6]; /* Desired hardware address */
};
+struct npe_ucode_platform_data {
+ unsigned char *mtd_partition;
+};
struct sys_timer;
Index: linux-2.6.19/include/linux/ixp_npe.h
===================================================================
--- linux-2.6.19.orig/include/linux/ixp_npe.h
+++ linux-2.6.19/include/linux/ixp_npe.h
@@ -71,6 +71,7 @@ static inline u32 npe_read_ecs_reg(struc
}
extern struct device *get_npe_by_id(int id);
+extern int store_npe_image(struct dl_image *image, struct device *dev);
/* NPE Messages */
extern int

View File

@ -0,0 +1,41 @@
Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
===================================================================
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -137,6 +137,28 @@ static struct platform_device nslu2_uart
.resource = nslu2_uart_resources,
};
+static struct resource res_mac0 = {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct mac_plat_info plat_mac0 = {
+ .npe_id = 1,
+ .phy_id = 1,
+ .eth_id = 0,
+ .rxq_id = 27,
+ .txq_id = 24,
+};
+
+static struct platform_device mac0 = {
+ .name = "ixp4xx_mac",
+ .id = 0,
+ .dev.platform_data = &plat_mac0,
+ .num_resources = 1,
+ .resource = &res_mac0,
+};
+
static struct platform_device *nslu2_devices[] __initdata = {
&nslu2_i2c_controller,
&nslu2_flash,
@@ -144,6 +166,7 @@ static struct platform_device *nslu2_dev
#ifdef CONFIG_LEDS_IXP4XX
&nslu2_leds,
#endif
+ &mac0
};
static void nslu2_power_off(void)

View File

@ -0,0 +1,40 @@
Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
===================================================================
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -123,12 +123,35 @@ static struct platform_device nas100d_ua
.resource = nas100d_uart_resources,
};
+static struct resource res_mac0 = {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct mac_plat_info plat_mac0 = {
+ .npe_id = 1,
+ .phy_id = 0,
+ .eth_id = 0,
+ .rxq_id = 27,
+ .txq_id = 24,
+};
+
+static struct platform_device mac0 = {
+ .name = "ixp4xx_mac",
+ .id = 0,
+ .dev.platform_data = &plat_mac0,
+ .num_resources = 1,
+ .resource = &res_mac0,
+};
+
static struct platform_device *nas100d_devices[] __initdata = {
&nas100d_i2c_controller,
&nas100d_flash,
#ifdef CONFIG_LEDS_IXP4XX
&nas100d_leds,
#endif
+ &mac0
};
static void nas100d_power_off(void)

View File

@ -0,0 +1,35 @@
---
arch/arm/mach-ixp4xx/nslu2-setup.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
===================================================================
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -159,6 +159,16 @@ static struct platform_device mac0 = {
.resource = &res_mac0,
};
+struct npe_ucode_platform_data nslu2_npe_ucode_data = {
+ .mtd_partition = "FIS directory",
+};
+
+static struct platform_device nslu2_npe_ucode = {
+ .name = "ixp4xx_npe_ucode",
+ .id = 0,
+ .dev.platform_data = &nslu2_npe_ucode_data,
+};
+
static struct platform_device *nslu2_devices[] __initdata = {
&nslu2_i2c_controller,
&nslu2_flash,
@@ -166,7 +176,8 @@ static struct platform_device *nslu2_dev
#ifdef CONFIG_LEDS_IXP4XX
&nslu2_leds,
#endif
- &mac0
+ &mac0,
+ &nslu2_npe_ucode,
};
static void nslu2_power_off(void)

View File

@ -0,0 +1,34 @@
---
arch/arm/mach-ixp4xx/nas100d-setup.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
===================================================================
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -145,13 +145,24 @@ static struct platform_device mac0 = {
.resource = &res_mac0,
};
+struct npe_ucode_platform_data nas100d_npe_ucode_data = {
+ .mtd_partition = "sysconfig",
+};
+
+static struct platform_device nas100d_npe_ucode = {
+ .name = "ixp4xx_npe_ucode",
+ .id = 0,
+ .dev.platform_data = &nas100d_npe_ucode_data,
+};
+
static struct platform_device *nas100d_devices[] __initdata = {
&nas100d_i2c_controller,
&nas100d_flash,
#ifdef CONFIG_LEDS_IXP4XX
&nas100d_leds,
#endif
- &mac0
+ &mac0,
+ &nas100d_npe_ucode,
};
static void nas100d_power_off(void)

View File

@ -0,0 +1,56 @@
---
arch/arm/mach-ixp4xx/nas100d-setup.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
===================================================================
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -16,6 +16,7 @@
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/leds.h>
+#include <linux/mtd/mtd.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -165,6 +166,30 @@ static struct platform_device *nas100d_d
&nas100d_npe_ucode,
};
+static void nas100d_flash_add(struct mtd_info *mtd)
+{
+ if (strcmp(mtd->name, "RedBoot config") == 0) {
+ size_t retlen;
+ u_char mac[6];
+
+ if (mtd->read(mtd, 0x0FD8, 6, &retlen, mac) == 0 && retlen == 6) {
+ printk(KERN_INFO "nas100d mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+ memcpy(plat_mac0.hwaddr, mac, 6);
+ } else {
+ printk(KERN_ERR "nas100d mac: read failed\n");
+ }
+ }
+}
+
+static void nas100d_flash_remove(struct mtd_info *mtd) {
+}
+
+static struct mtd_notifier nas100d_flash_notifier = {
+ .add = nas100d_flash_add,
+ .remove = nas100d_flash_remove,
+};
+
static void nas100d_power_off(void)
{
/* This causes the box to drop the power and go dead. */
@@ -196,6 +221,8 @@ static void __init nas100d_init(void)
(void)platform_device_register(&nas100d_uart);
platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
+
+ register_mtd_user(&nas100d_flash_notifier);
}
MACHINE_START(NAS100D, "Iomega NAS 100d")

View File

@ -0,0 +1,56 @@
---
arch/arm/mach-ixp4xx/nslu2-setup.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
===================================================================
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -18,6 +18,7 @@
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/leds.h>
+#include <linux/mtd/mtd.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -180,6 +181,30 @@ static struct platform_device *nslu2_dev
&nslu2_npe_ucode,
};
+static void nslu2_flash_add(struct mtd_info *mtd)
+{
+ if (strcmp(mtd->name, "RedBoot") == 0) {
+ size_t retlen;
+ u_char mac[6];
+
+ if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) {
+ printk(KERN_INFO "nslu2 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+ memcpy(plat_mac0.hwaddr, mac, 6);
+ } else {
+ printk(KERN_ERR "nslu2 mac: read failed\n");
+ }
+ }
+}
+
+static void nslu2_flash_remove(struct mtd_info *mtd) {
+}
+
+static struct mtd_notifier nslu2_flash_notifier = {
+ .add = nslu2_flash_add,
+ .remove = nslu2_flash_remove,
+};
+
static void nslu2_power_off(void)
{
/* This causes the box to drop the power and go dead. */
@@ -210,6 +235,8 @@ static void __init nslu2_init(void)
(void)platform_device_register(&nslu2_uart);
platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
+
+ register_mtd_user(&nslu2_flash_notifier);
}
MACHINE_START(NSLU2, "Linksys NSLU2")

View File

@ -0,0 +1,49 @@
From: Alan Cox <alan@redhat.com>
To: Alessandro Zummo <alessandro.zummo@towertech.it>
Cc: Jeff Garzik <jgarzik@redhat.com>, Alan Cox <alan@redhat.com>
Subject: Re: drivers/ata/pata_artop.c
Date: Sun, 15 Oct 2006 14:25:16 -0400
User-Agent: Mutt/1.4.1i
On Sun, Oct 15, 2006 at 07:18:31PM +0200, Alessandro Zummo wrote:
> In the discovery phase there's a lot of time spent in the detection
> of the second port.
The error recovery is a bit determined right now - Tejun's been doing some
work on SRST behaviour and also for the worst cases polled detect so it
should come out ok
> What's the correct way to inform the driver
> to avoid checking the second port?
Set the number of ports to 1 in your own tree for now. The real fix is
not to go poking at pata ports if the ret is 0xFF
---
drivers/ata/pata_artop.c | 6 ++++++
1 file changed, 6 insertions(+)
Index: linux-2.6.19/drivers/ata/pata_artop.c
===================================================================
--- linux-2.6.19.orig/drivers/ata/pata_artop.c
+++ linux-2.6.19/drivers/ata/pata_artop.c
@@ -26,6 +26,7 @@
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/ata.h>
+#include <asm/mach-types.h>
#define DRV_NAME "pata_artop"
#define DRV_VERSION "0.4.2"
@@ -469,6 +470,11 @@ static int artop_init_one (struct pci_de
pci_read_config_byte(pdev, 0x4a, &reg);
pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
+ /* NAS100D workaround */
+#ifdef CONFIG_MACH_NAS100D
+ if (machine_is_nas100d())
+ ports = 1;
+#endif
}
BUG_ON(info == NULL);

View File

@ -0,0 +1,54 @@
Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
===================================================================
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -20,6 +20,7 @@
#include <linux/leds.h>
#include <linux/mtd/mtd.h>
+#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
@@ -239,11 +240,41 @@ static void __init nslu2_init(void)
register_mtd_user(&nslu2_flash_notifier);
}
+static char nslu2_rtc_probe[] __initdata = "rtc-x1205.probe=0,0x6f ";
+
+static void __init nslu2_fixup(struct machine_desc *desc,
+ struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+ struct tag *t = tags;
+ char *p = *cmdline;
+
+ /* Find the end of the tags table, taking note of any cmdline tag. */
+ for (; t->hdr.size; t = tag_next(t)) {
+ if (t->hdr.tag == ATAG_CMDLINE) {
+ p = t->u.cmdline.cmdline;
+ }
+ }
+
+ /* Overwrite the end of the table with a new cmdline tag. */
+ t->hdr.tag = ATAG_CMDLINE;
+ t->hdr.size = (sizeof (struct tag_header) +
+ strlen(nslu2_rtc_probe) + strlen(p) + 1 + 4) >> 2;
+ strlcpy(t->u.cmdline.cmdline, nslu2_rtc_probe, COMMAND_LINE_SIZE);
+ strlcpy(t->u.cmdline.cmdline + strlen(nslu2_rtc_probe), p,
+ COMMAND_LINE_SIZE - strlen(nslu2_rtc_probe));
+
+ /* Terminate the table. */
+ t = tag_next(t);
+ t->hdr.tag = ATAG_NONE;
+ t->hdr.size = 0;
+}
+
MACHINE_START(NSLU2, "Linksys NSLU2")
/* Maintainer: www.nslu2-linux.org */
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
.boot_params = 0x00000100,
+ .fixup = nslu2_fixup,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,

View File

@ -0,0 +1,55 @@
Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
===================================================================
--- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -18,6 +18,7 @@
#include <linux/leds.h>
#include <linux/mtd/mtd.h>
+#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
@@ -225,11 +226,42 @@ static void __init nas100d_init(void)
register_mtd_user(&nas100d_flash_notifier);
}
+static char nas100d_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 ";
+
+static void __init nas100d_fixup(struct machine_desc *desc,
+ struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+ struct tag *t = tags;
+ char *p = *cmdline;
+
+ /* Find the end of the tags table, taking note of any cmdline tag. */
+ for (; t->hdr.size; t = tag_next(t)) {
+ if (t->hdr.tag == ATAG_CMDLINE) {
+ p = t->u.cmdline.cmdline;
+ }
+ }
+
+ /* Overwrite the end of the table with a new cmdline tag. */
+ t->hdr.tag = ATAG_CMDLINE;
+ t->hdr.size =
+ (sizeof (struct tag_header) +
+ strlen(nas100d_rtc_probe) + strlen(p) + 1 + 4) >> 2;
+ strlcpy(t->u.cmdline.cmdline, nas100d_rtc_probe, COMMAND_LINE_SIZE);
+ strlcpy(t->u.cmdline.cmdline + strlen(nas100d_rtc_probe), p,
+ COMMAND_LINE_SIZE - strlen(nas100d_rtc_probe));
+
+ /* Terminate the table. */
+ t = tag_next(t);
+ t->hdr.tag = ATAG_NONE;
+ t->hdr.size = 0;
+}
+
MACHINE_START(NAS100D, "Iomega NAS 100d")
/* Maintainer: www.nslu2-linux.org */
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
.boot_params = 0x00000100,
+ .fixup = nas100d_fixup,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,