183130227/tn3399_openwrt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ath79: add support for Qxwlan E600G v2 / E600GAC v2

Browse Source 
E600G v2 based on Qualcomm/Atheros QCA9531

Specification:

 - 650/600/200 MHz (CPU/DDR/AHB)
 - 128/64 MB of RAM (DDR2)
 - 8/16 MB of FLASH (SPI NOR)
 - 2T2R 2.4 GHz
 - 2 x 10/100 Mbps Ethernet(RJ45)
 - 1 x MiniPCI-e
 - 1 x SIM (3G/4G)
 - 5 x LED , 1 x Button(SW2-Reset Buttun), 1 x power input
 - UART(J100) header on PCB(115200 8N1)

E600GAC v2 based on Qualcomm/Atheros QCA9531 + QCA9887

Specification:

 - 650/600/200 MHz (CPU/DDR/AHB)
 - 128/64 MB of RAM (DDR2)
 - 8/16 MB of FLASH (SPI NOR)
 - 2T2R 2.4 GHz
 - 1T1R 5 GHz
 - 2 x 10/100 Mbps Ethernet(RJ45)
 - 6 x LED (one three-color led), 2 x Button(SW2-Reset Buttun),1 x power input
 - UART (J100)header on PCB(115200 8N1)

Flash instruction:

1.Using tftp mode with UART connection and original OpenWrt image
 - Configure PC with static IP 192.168.1.10 and tftp server.
 - Rename "openwrt-ath79-generic-xxx-squashfs-sysupgrade.bin"
   to "firmware.bin" and place it in tftp server directory.
 - Connect PC with one of LAN ports, power up the router and press
   key "Enter" to access U-Boot CLI.
 - Use the following commands to update the device to OpenWrt:
   run lfw
 - After that the device will reboot and boot to OpenWrt.
 - Wait until all LEDs stops flashing and use the router.

2.Using httpd mode with Web UI connection and original OpenWrt image
 - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
 - Connect PC with one of LAN ports,press the reset button, power up
   the router and keep button pressed for around 6-7 seconds, until
   leds flashing.
 - Open your browser and enter 192.168.1.1,You will see the upgrade
   interface, select "openwrt-ath79-generic-xxx-squashfs-
   sysupgrade.bin" and click the upgrade button.
 - After that the device will reboot and boot to OpenWrt.
 - Wait until all LEDs stops flashing and use the router.

Signed-off-by: 张鹏 <sd20@qxwlan.com>
[rearrange in generic.mk, fix one case in 04_led_migration, update
commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
张鹏 2020-10-31 09:35:21 +08:00 committed by Adrian Schmutzler
parent 75401550c3
commit 448de2e2e5
9 changed files with 332 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts Normal file
View File

@ -0,0 +1,32 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9531_qxwlan_e600g.dtsi"
/ {
model = "Qxwlan E600G v2 16M";
compatible = "qxwlan,e600g-v2-16m", "qca,qca9531";
};
&leds {
wlan {
label = "blue:wlan";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
&partitions {
partition@70000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x070000 0xf90000>;
};
};
&usb_phy {
status = "okay";
};
&usb0 {
status = "okay";
};

32
target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts Normal file
View File

@ -0,0 +1,32 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9531_qxwlan_e600g.dtsi"
/ {
model = "Qxwlan E600G v2 8M";
compatible = "qxwlan,e600g-v2-8m", "qca,qca9531";
};
&leds {
wlan {
label = "blue:wlan";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
&partitions {
partition@70000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x070000 0x790000>;
};
};
&usb_phy {
status = "okay";
};
&usb0 {
status = "okay";
};

114
target/linux/ath79/dts/qca9531_qxwlan_e600g.dtsi Normal file
View File

@ -0,0 +1,114 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca953x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
label-mac-device = &eth0;
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
keys: keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds: leds {
compatible = "gpio-leds";
led_system: system {
label = "blue:system";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wan {
label = "green:wan";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan {
label = "green:lan";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
};
&pcie0 {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
pridata: partition@50000 {
label = "pri-data";
reg = <0x050000 0x010000>;
read-only;
};
art: partition@60000 {
label = "art";
reg = <0x060000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&pridata 0x400>;
mtd-mac-address-increment = <1>;
};
&eth1 {
mtd-mac-address = <&pridata 0x400>;
};
&uart {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
};

48
target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-16m.dts Normal file
View File

@ -0,0 +1,48 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9531_qxwlan_e600g.dtsi"
/ {
model = "Qxwlan E600GAC v2 16M";
compatible = "qxwlan,e600gac-v2-16m", "qca,qca9531";
};
&keys {
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
&leds {
wlan2g {
label = "orange:wlan2g";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
control1 {
label = "green:control";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
control2 {
label = "red:control";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
control3 {
label = "blue:control";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
&partitions {
partition@70000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x070000 0xf90000>;
};
};

48
target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-8m.dts Normal file
View File

@ -0,0 +1,48 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9531_qxwlan_e600g.dtsi"
/ {
model = "Qxwlan E600GAC v2 8M";
compatible = "qxwlan,e600gac-v2-8m", "qca,qca9531";
};
&keys {
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
&leds {
wlan2g {
label = "orange:wlan2g";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
control1 {
label = "green:control";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
control2 {
label = "red:control";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
control3 {
label = "blue:control";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
&partitions {
partition@70000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x070000 0x790000>;
};
};

4
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@ -195,6 +195,10 @@ etactica,eg200)
ucidef_set_led_oneshot "modbus" "Modbus" "red:modbus" "100" "33"
;;
glinet,gl-mifi|\
qxwlan,e600g-v2-8m|\
qxwlan,e600g-v2-16m|\
qxwlan,e600gac-v2-8m|\
qxwlan,e600gac-v2-16m|\
qxwlan,e750a-v4-8m|\
qxwlan,e750a-v4-16m)
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x02"

2
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -24,6 +24,8 @@ case "$FIRMWARE" in
devolo,magic-2-wifi|\
qxwlan,e1700ac-v2-8m|\
qxwlan,e1700ac-v2-16m|\
qxwlan,e600gac-v2-8m|\
qxwlan,e600gac-v2-16m|\
ubnt,unifiac-lite|\
ubnt,unifiac-lr|\
ubnt,unifiac-mesh|\

8
target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
View File

@ -24,6 +24,14 @@ qxwlan,e558-v2-16m|\
qxwlan,e558-v2-8m)
migrate_leds ":qss=:sig2"
;;
qxwlan,e600g-v2-16m|\
qxwlan,e600g-v2-8m)
migrate_leds "blue:wan=blue:wlan"
;;
qxwlan,e600gac-v2-16m|\
qxwlan,e600gac-v2-8m)
migrate_leds "orange:wan=orange:wlan2g" "green:system=blue:system"
;;
qxwlan,e750a-v4-16m|\
qxwlan,e750a-v4-8m|\
qxwlan,e750g-v8-16m|\

44
target/linux/ath79/image/generic.mk
View File

@ -1513,6 +1513,50 @@ define Device/qxwlan_e558-v2-8m
endef
TARGET_DEVICES += qxwlan_e558-v2-8m
define Device/qxwlan_e600g-v2
SOC := qca9531
DEVICE_VENDOR := Qxwlan
DEVICE_MODEL := E600G
DEVICE_PACKAGES := kmod-usb2
SUPPORTED_DEVICES += e600g-v2
endef
define Device/qxwlan_e600g-v2-16m
$(Device/qxwlan_e600g-v2)
DEVICE_VARIANT := v2 (16M)
IMAGE_SIZE := 15936k
endef
TARGET_DEVICES += qxwlan_e600g-v2-16m
define Device/qxwlan_e600g-v2-8m
$(Device/qxwlan_e600g-v2)
DEVICE_VARIANT := v2 (8M)
IMAGE_SIZE := 7744k
endef
TARGET_DEVICES += qxwlan_e600g-v2-8m
define Device/qxwlan_e600gac-v2
SOC := qca9531
DEVICE_VENDOR := Qxwlan
DEVICE_MODEL := E600GAC
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
SUPPORTED_DEVICES += e600gac-v2
endef
define Device/qxwlan_e600gac-v2-16m
$(Device/qxwlan_e600gac-v2)
DEVICE_VARIANT := v2 (16M)
IMAGE_SIZE := 15936k
endef
TARGET_DEVICES += qxwlan_e600gac-v2-16m
define Device/qxwlan_e600gac-v2-8m
$(Device/qxwlan_e600gac-v2)
DEVICE_VARIANT := v2 (8M)
IMAGE_SIZE := 7744k
endef
TARGET_DEVICES += qxwlan_e600gac-v2-8m
define Device/qxwlan_e750a-v4
SOC := ar9344
DEVICE_VENDOR := Qxwlan