ath79: Add support for OpenMesh MR600 v1
Device specifications: ====================== * Qualcomm/Atheros AR9344 rev 2 * 560/450/225 MHz (CPU/DDR/AHB) * 128 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2T2R 2.4 GHz Wi-Fi * 2T2R 5 GHz Wi-Fi * 4x GPIO-LEDs (2x wifi, 1x wps, 1x power) * 1x GPIO-button (reset) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 1x ethernet - AR8035 ethernet PHY (RGMII) - 10/100/1000 Mbps Ethernet - 802.3af POE - used as LAN interface * 12-24V 1A DC * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Signed-off-by: Sven Eckelmann <sven@narfation.org> [rebase, make WLAN LEDs consistent, add LED migration] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
parent
0fda8049a7
commit
4b35999588
|
@ -48,6 +48,7 @@ netgear,wnr2200-16m|\
|
||||||
netgear,wnr612-v2|\
|
netgear,wnr612-v2|\
|
||||||
ocedo,koala|\
|
ocedo,koala|\
|
||||||
ocedo,raccoon|\
|
ocedo,raccoon|\
|
||||||
|
openmesh,mr600-v1|\
|
||||||
openmesh,om5p|\
|
openmesh,om5p|\
|
||||||
openmesh,om5p-ac-v2|\
|
openmesh,om5p-ac-v2|\
|
||||||
samsung,wam250|\
|
samsung,wam250|\
|
||||||
|
|
46
target/linux/ath79/dts/ar9344_openmesh_mr600-v1.dts
Normal file
46
target/linux/ath79/dts/ar9344_openmesh_mr600-v1.dts
Normal file
|
@ -0,0 +1,46 @@
|
||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
|
||||||
|
#include "ar9344_openmesh_mr600.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
compatible = "openmesh,mr600-v1", "qca,ar9344";
|
||||||
|
model = "OpenMesh MR600 v1";
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
led-boot = &led_power_orange;
|
||||||
|
led-failsafe = &led_power_orange;
|
||||||
|
led-running = &led_power_orange;
|
||||||
|
led-upgrade = &led_power_orange;
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
wifi5g_green {
|
||||||
|
label = "green:wifi5g";
|
||||||
|
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||||
|
linux,default-trigger = "phy0tpt";
|
||||||
|
};
|
||||||
|
|
||||||
|
wps_blue {
|
||||||
|
label = "blue:wps";
|
||||||
|
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
|
||||||
|
led_power_orange: power_orange {
|
||||||
|
label = "orange:power";
|
||||||
|
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||||
|
default-state = "on";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
leds-ath9k {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
wifi2g {
|
||||||
|
label = "blue:wifi2g";
|
||||||
|
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
|
||||||
|
linux,default-trigger = "phy1tpt";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
133
target/linux/ath79/dts/ar9344_openmesh_mr600.dtsi
Normal file
133
target/linux/ath79/dts/ar9344_openmesh_mr600.dtsi
Normal file
|
@ -0,0 +1,133 @@
|
||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
|
||||||
|
#include "ar9344.dtsi"
|
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/input/input.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
chosen {
|
||||||
|
/delete-property/ bootargs;
|
||||||
|
};
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
serial0 = &uart;
|
||||||
|
label-mac-device = ð0;
|
||||||
|
};
|
||||||
|
|
||||||
|
keys {
|
||||||
|
compatible = "gpio-keys";
|
||||||
|
|
||||||
|
reset {
|
||||||
|
label = "reset";
|
||||||
|
linux,code = <KEY_RESTART>;
|
||||||
|
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&ref {
|
||||||
|
clock-frequency = <40000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&spi {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
flash@0 {
|
||||||
|
compatible = "jedec,spi-nor";
|
||||||
|
reg = <0>;
|
||||||
|
spi-max-frequency = <40000000>;
|
||||||
|
|
||||||
|
/* partitions are passed via bootloader */
|
||||||
|
partitions {
|
||||||
|
compatible = "fixed-partitions";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
partition@0 {
|
||||||
|
label = "u-boot";
|
||||||
|
reg = <0x000000 0x040000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@40000 {
|
||||||
|
label = "u-boot-env";
|
||||||
|
reg = <0x040000 0x010000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@50000 {
|
||||||
|
label = "custom";
|
||||||
|
reg = <0x050000 0x060000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@b0000 {
|
||||||
|
label = "inactive";
|
||||||
|
reg = <0x0b0000 0x7a0000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@850000 {
|
||||||
|
label = "inactive2";
|
||||||
|
reg = <0x850000 0x7a0000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
art: partition@ff0000 {
|
||||||
|
label = "ART";
|
||||||
|
reg = <0xff0000 0x010000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&mdio0 {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
phy-mask = <0x1>;
|
||||||
|
|
||||||
|
phy0: ethernet-phy@0 {
|
||||||
|
reg = <0>;
|
||||||
|
eee-broken-100tx;
|
||||||
|
eee-broken-1000t;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
ð0 {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
pll-data = <0x06000000 0x00000101 0x00001313>;
|
||||||
|
|
||||||
|
mtd-mac-address = <&art 0x0>;
|
||||||
|
|
||||||
|
phy-mode = "rgmii";
|
||||||
|
phy-handle = <&phy0>;
|
||||||
|
|
||||||
|
gmac-config {
|
||||||
|
device = <&gmac>;
|
||||||
|
rgmii-gmac0 = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&wmac {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
mtd-cal-data = <&art 0x1000>;
|
||||||
|
mtd-mac-address = <&art 0x0>;
|
||||||
|
mtd-mac-address-increment = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&pcie {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
ath9k: wifi@0,0 {
|
||||||
|
compatible = "pci168c,0030";
|
||||||
|
reg = <0x0000 0 0 0 0>;
|
||||||
|
qca,no-eeprom;
|
||||||
|
mtd-mac-address = <&art 0x0>;
|
||||||
|
mtd-mac-address-increment = <8>;
|
||||||
|
};
|
||||||
|
};
|
|
@ -46,6 +46,7 @@ ath79_setup_interfaces()
|
||||||
netgear,ex7300|\
|
netgear,ex7300|\
|
||||||
ocedo,koala|\
|
ocedo,koala|\
|
||||||
ocedo,raccoon|\
|
ocedo,raccoon|\
|
||||||
|
openmesh,mr600-v1|\
|
||||||
pcs,cap324|\
|
pcs,cap324|\
|
||||||
pisen,ts-d084|\
|
pisen,ts-d084|\
|
||||||
pisen,wmb001n|\
|
pisen,wmb001n|\
|
||||||
|
|
|
@ -120,6 +120,9 @@ case "$FIRMWARE" in
|
||||||
ubnt,rocket-m)
|
ubnt,rocket-m)
|
||||||
caldata_extract "art" 0x1000 0x1000
|
caldata_extract "art" 0x1000 0x1000
|
||||||
;;
|
;;
|
||||||
|
openmesh,mr600-v1)
|
||||||
|
caldata_extract "ART" 0x5000 0x440
|
||||||
|
;;
|
||||||
wd,mynet-n750)
|
wd,mynet-n750)
|
||||||
caldata_extract "art" 0x5000 0x440
|
caldata_extract "art" 0x5000 0x440
|
||||||
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
|
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
|
||||||
|
|
|
@ -17,6 +17,9 @@ engenius,epg5000)
|
||||||
glinet,gl-mifi)
|
glinet,gl-mifi)
|
||||||
migrate_leds ":net=:3g4g"
|
migrate_leds ":net=:3g4g"
|
||||||
;;
|
;;
|
||||||
|
openmesh,mr600-v1)
|
||||||
|
migrate_leds ":wlan58=:wifi5g"
|
||||||
|
;;
|
||||||
pcs,cap324)
|
pcs,cap324)
|
||||||
migrate_leds "lan:amber=amber:lan" "lan:green=green:lan"
|
migrate_leds "lan:amber=amber:lan" "lan:green=green:lan"
|
||||||
;;
|
;;
|
||||||
|
|
|
@ -50,6 +50,7 @@ platform_do_upgrade() {
|
||||||
jjplus,ja76pf2)
|
jjplus,ja76pf2)
|
||||||
redboot_fis_do_upgrade "$1" linux
|
redboot_fis_do_upgrade "$1" linux
|
||||||
;;
|
;;
|
||||||
|
openmesh,mr600-v1|\
|
||||||
openmesh,om2p-v2|\
|
openmesh,om2p-v2|\
|
||||||
openmesh,om2p-v4|\
|
openmesh,om2p-v4|\
|
||||||
openmesh,om2p-hs-v1|\
|
openmesh,om2p-hs-v1|\
|
||||||
|
|
|
@ -1525,6 +1525,26 @@ define Device/ocedo_ursus
|
||||||
endef
|
endef
|
||||||
TARGET_DEVICES += ocedo_ursus
|
TARGET_DEVICES += ocedo_ursus
|
||||||
|
|
||||||
|
define Device/openmesh_mr600-common
|
||||||
|
SOC := ar9344
|
||||||
|
DEVICE_VENDOR := OpenMesh
|
||||||
|
DEVICE_MODEL := MR600
|
||||||
|
DEVICE_PACKAGES := uboot-envtools
|
||||||
|
IMAGE_SIZE := 7808k
|
||||||
|
BLOCKSIZE := 64k
|
||||||
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \
|
||||||
|
pad-to $$(BLOCKSIZE)
|
||||||
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
|
||||||
|
openmesh-image ce_type=MR600 | append-metadata
|
||||||
|
endef
|
||||||
|
|
||||||
|
define Device/openmesh_mr600-v1
|
||||||
|
$(Device/openmesh_mr600-common)
|
||||||
|
DEVICE_VARIANT := v1
|
||||||
|
SUPPORTED_DEVICES += mr600
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += openmesh_mr600-v1
|
||||||
|
|
||||||
define Device/openmesh_om2p-common
|
define Device/openmesh_om2p-common
|
||||||
DEVICE_VENDOR := OpenMesh
|
DEVICE_VENDOR := OpenMesh
|
||||||
DEVICE_PACKAGES := uboot-envtools
|
DEVICE_PACKAGES := uboot-envtools
|
||||||
|
|
Loading…
Reference in New Issue
Block a user