ath79: add support for ZyXEL NWA1123-NI
Specifications: * AR9342, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R, 2.4 GHz * AR9382 PCIe card, 802.11n 2T2R, 5 GHz * 1x Gigabit Ethernet (AR8035), 802.3af PoE Installation: * OEM Web UI is at 192.168.1.2 login as `admin` with password `1234` * Flash factory-AAEO.bin The string `AAEO` needs to be present within the file name of the uploaded image to be accepted by the OEM Web-based updater, the factory image is named accordingly to save the user from the hassle of manual renaming. TFTP Recovery: * Open the case, connect to TTL UART port (this is the official method described by Zyxel, the reset button is useless during power-on) * Extract factory image (.tar.bz2), serve `vmlinux_mi124_f1e.lzma.uImage` and `mi124_f1e-jffs2` via tftp at 192.168.1.10 * Interrupt uboot countdown, execute commands `run lk` `run lf` to flash the kernel / filesystem accordingly MAC addresses as verified by OEM firmware: use address source LAN *:fb mib0 0x30 ('eth0mac'), art 0x1002 (label) 2g *:fc mib0 0x4b ('wifi0mac') 5g *:fd mib0 0x66 ('wifi1mac') Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
This commit is contained in:
parent
251ecfe379
commit
527be5a456
35
target/linux/ath79/dts/ar9342_zyxel_nwa1123-ni.dts
Normal file
35
target/linux/ath79/dts/ar9342_zyxel_nwa1123-ni.dts
Normal file
|
@ -0,0 +1,35 @@
|
||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
|
||||||
|
#include "ar9342_zyxel_nwa11xx.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
compatible = "zyxel,nwa1123-ni", "qca,ar9342";
|
||||||
|
model = "Zyxel NWA1123-NI";
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
label-mac-device = ð0;
|
||||||
|
led-boot = &led_status_green;
|
||||||
|
led-failsafe = &led_status_amber;
|
||||||
|
led-running = &led_status_green;
|
||||||
|
led-upgrade = &led_status_amber;
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
led_status_green: status_green {
|
||||||
|
label = "green:status";
|
||||||
|
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||||
|
default-state = "on";
|
||||||
|
};
|
||||||
|
|
||||||
|
led_status_amber: status_amber {
|
||||||
|
label = "amber:status";
|
||||||
|
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&pcie {
|
||||||
|
status = "okay";
|
||||||
|
};
|
|
@ -110,7 +110,8 @@ ath79_setup_interfaces()
|
||||||
ubnt,unifi|\
|
ubnt,unifi|\
|
||||||
wd,mynet-wifi-rangeextender|\
|
wd,mynet-wifi-rangeextender|\
|
||||||
winchannel,wb2000|\
|
winchannel,wb2000|\
|
||||||
zyxel,nwa1121-ni)
|
zyxel,nwa1121-ni|\
|
||||||
|
zyxel,nwa1123-ni)
|
||||||
ucidef_set_interface_lan "eth0"
|
ucidef_set_interface_lan "eth0"
|
||||||
;;
|
;;
|
||||||
airtight,c-75)
|
airtight,c-75)
|
||||||
|
|
|
@ -68,4 +68,8 @@ case "$board" in
|
||||||
[ "$PHYNBR" -eq 1 ] && \
|
[ "$PHYNBR" -eq 1 ] && \
|
||||||
mtd_get_mac_ascii u-boot-env ethaddr > /sys${DEVPATH}/macaddress
|
mtd_get_mac_ascii u-boot-env ethaddr > /sys${DEVPATH}/macaddress
|
||||||
;;
|
;;
|
||||||
|
zyxel,nwa1123-ni)
|
||||||
|
[ "$PHYNBR" -eq 1 ] && \
|
||||||
|
mtd_get_mac_text mib0 0x66 > /sys${DEVPATH}/macaddress
|
||||||
|
;;
|
||||||
esac
|
esac
|
||||||
|
|
|
@ -2716,6 +2716,14 @@ define Device/zyxel_nwa1121-ni
|
||||||
endef
|
endef
|
||||||
TARGET_DEVICES += zyxel_nwa1121-ni
|
TARGET_DEVICES += zyxel_nwa1121-ni
|
||||||
|
|
||||||
|
define Device/zyxel_nwa1123-ni
|
||||||
|
$(Device/zyxel_nwa11xx)
|
||||||
|
DEVICE_MODEL := NWA1123
|
||||||
|
DEVICE_VARIANT := NI
|
||||||
|
ZYXEL_MODEL_STRING := AAEO
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += zyxel_nwa1123-ni
|
||||||
|
|
||||||
define Device/zyxel_nbg6616
|
define Device/zyxel_nbg6616
|
||||||
SOC := qca9557
|
SOC := qca9557
|
||||||
DEVICE_VENDOR := ZyXEL
|
DEVICE_VENDOR := ZyXEL
|
||||||
|
|
Loading…
Reference in New Issue
Block a user