ar71xx: add support for Rockeetech AP531B0
Specification: - SoC: Qualcomm Atheros QCA9531 (650/400/216 MHz (CPU/DDR/AHB)) - RAM: 64 MiB DDR2 - Storage: 16 MiB of flash (optional 16 MiB second flash) - Wireless: built into QCA9531 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) 1x100M (port 4) - PCI-E: x1 - SIMcard slot: x1 - USB 2.0 port: x1 (optional) - Ext GPIO pin: x8 - UART for serial console: x1 - External watchdog: x1 (optional) - Power supply: 9-48V (DC jack/passive PoE) Installation through tftp: - Copy <Firmware Image Name> into tftp directory - Connect board via ttl port and Ethernet port - Boot the AP531B0 - When "Autobooting in 1 seconds" appears press Enter - Set serverip and ipaddr appropriate (e.g. setenv serverip 192.168.88.10;setenv ipaddr 192.168.88.1) - Enter "tftp 0x8050000 <Firmware Image Name>" - Enter "erase 0x9f050000 +$filesize" - Enter "cp.b 0x80500000 0x9f050000 $filesize" - Enter "reset" Signed-off-by: Shuanglin Liu <roboidler@gmail.com>
This commit is contained in:
Shuanglin Liu
Piotr Dymacz
parent
3183015e1e
commit
53ef20f65a
|
|
@ -49,6 +49,11 @@ antrouter-r1)
|
|||
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
|
||||
ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0"
|
||||
;;
|
||||
ap531b0|\
|
||||
sc1750|\
|
||||
sc450)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
|
||||
;;
|
||||
archer-c59-v1|\
|
||||
archer-c60-v1)
|
||||
ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
|
||||
|
|
@ -490,10 +495,6 @@ re450)
|
|||
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
|
||||
;;
|
||||
sc1750|\
|
||||
sc450)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
|
||||
;;
|
||||
smart-300)
|
||||
ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"
|
||||
|
|
|
|||
|
|
@ -31,6 +31,7 @@ get_status_led() {
|
|||
status_led="$board:green:system"
|
||||
;;
|
||||
ap132|\
|
||||
ap531b0|\
|
||||
db120|\
|
||||
dr344|\
|
||||
tew-632brp|\
|
||||
|
|
|
|||
|
|
@ -458,6 +458,9 @@ ar71xx_board_detect() {
|
|||
*"AP152 reference board")
|
||||
name="ap152"
|
||||
;;
|
||||
*AP531B0)
|
||||
name="ap531b0"
|
||||
;;
|
||||
*AP90Q)
|
||||
name="ap90q"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -204,6 +204,7 @@ platform_check_image() {
|
|||
airgateway|\
|
||||
airrouter|\
|
||||
ap132|\
|
||||
ap531b0|\
|
||||
ap90q|\
|
||||
archer-c59-v1|\
|
||||
archer-c60-v1|\
|
||||
|
|
|
|||
|
|
@ -47,6 +47,7 @@ CONFIG_ATH79_MACH_AP136=y
|
|||
CONFIG_ATH79_MACH_AP143=y
|
||||
CONFIG_ATH79_MACH_AP147=y
|
||||
CONFIG_ATH79_MACH_AP152=y
|
||||
CONFIG_ATH79_MACH_AP531B0=y
|
||||
# CONFIG_ATH79_MACH_AP81 is not set
|
||||
CONFIG_ATH79_MACH_AP90Q=y
|
||||
CONFIG_ATH79_MACH_AP96=y
|
||||
|
|
|
|||
|
|
@ -183,6 +183,18 @@ config ATH79_MACH_AP152
|
|||
select ATH79_DEV_WMAC
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
|
||||
config ATH79_MACH_AP531B0
|
||||
bool "Rockeetech AP531B0 support"
|
||||
select SOC_QCA953X
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_SPI
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_AP90Q
|
||||
bool "YunCore AP90Q support"
|
||||
select SOC_QCA953X
|
||||
|
|
|
|||
|
|
@ -53,6 +53,7 @@ obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
|
|||
obj-$(CONFIG_ATH79_MACH_AP143) += mach-ap143.o
|
||||
obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o
|
||||
obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
|
||||
obj-$(CONFIG_ATH79_MACH_AP531B0) += mach-ap531b0.o
|
||||
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
|
||||
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
|
||||
obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
|
||||
|
|
|
|||
112
target/linux/ar71xx/files/arch/mips/ath79/mach-ap531b0.c
Normal file
112
target/linux/ar71xx/files/arch/mips/ath79/mach-ap531b0.c
Normal file
|
|
@ -0,0 +1,112 @@
|
|||
/*
|
||||
* Rockeetech AP531B0 11ng wireless AP board support
|
||||
*
|
||||
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (C) 2016 Shuanglin Liu <roboidler@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
#include "pci.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
|
||||
#define AP531B0_GPIO_LED_WLAN 12
|
||||
#define AP531B0_GPIO_LED_STATUS 11
|
||||
|
||||
#define AP531B0_GPIO_RST_BTN 17
|
||||
|
||||
#define AP531B0_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define AP531B0_KEYS_DEBOUNCE_INTERVAL (3 * AP531B0_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define AP531B0_WMAC_CALDATA_OFFSET 0x1000
|
||||
|
||||
|
||||
static struct gpio_led ap531b0_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "ap531b0:green:status",
|
||||
.gpio = AP531B0_GPIO_LED_STATUS,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "ap531b0:green:wlan",
|
||||
.gpio = AP531B0_GPIO_LED_WLAN,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_button ap531b0_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = AP531B0_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = AP531B0_GPIO_RST_BTN,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
|
||||
static void __init ap531b0_gpio_led_setup(void)
|
||||
{
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap531b0_leds_gpio),
|
||||
ap531b0_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, AP531B0_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(ap531b0_gpio_keys),
|
||||
ap531b0_gpio_keys);
|
||||
}
|
||||
|
||||
static void __init ap531b0_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
u8 *pmac;
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
ap531b0_gpio_led_setup();
|
||||
ath79_register_usb();
|
||||
ath79_register_pci();
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
pmac = art + AP531B0_WMAC_CALDATA_OFFSET + 2;
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, pmac, 1);
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, pmac, 2);
|
||||
|
||||
ath79_register_wmac(art + AP531B0_WMAC_CALDATA_OFFSET, pmac);
|
||||
|
||||
/* WAN port */
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.speed = SPEED_100;
|
||||
ath79_eth0_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth0_data.phy_mask = BIT(4);
|
||||
ath79_register_eth(0);
|
||||
|
||||
/* LAN ports */
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
||||
ath79_eth1_data.speed = SPEED_1000;
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
ath79_switch_data.phy_poll_mask |= BIT(4);
|
||||
ath79_switch_data.phy4_mii_en = 1;
|
||||
ath79_register_eth(1);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_AP531B0, "AP531B0", "Rockeetech AP531B0",
|
||||
ap531b0_setup);
|
||||
|
|
@ -37,6 +37,7 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_AP143, /* Atheros AP143 reference board */
|
||||
ATH79_MACH_AP147_010, /* Atheros AP147-010 reference board */
|
||||
ATH79_MACH_AP152, /* Atheros AP152 reference board */
|
||||
ATH79_MACH_AP531B0, /* Rockeetech AP531B0 */
|
||||
ATH79_MACH_AP90Q, /* YunCore AP90Q */
|
||||
ATH79_MACH_AP96, /* Atheros AP96 */
|
||||
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
|
||||
|
|
|
|||
|
|
@ -1,3 +1,12 @@
|
|||
define Device/ap531b0
|
||||
DEVICE_TITLE := Rockeetech AP531B0
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
||||
BOARDNAME = AP531B0
|
||||
IMAGE_SIZE := 16000k
|
||||
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
||||
endef
|
||||
TARGET_DEVICES += ap531b0
|
||||
|
||||
define Device/ap90q
|
||||
DEVICE_TITLE := YunCore AP90Q
|
||||
BOARDNAME = AP90Q
|
||||
|
|
|
|||
|
|
@ -13,6 +13,7 @@
|
|||
# CONFIG_ATH79_MACH_AP143 is not set
|
||||
# CONFIG_ATH79_MACH_AP147 is not set
|
||||
# CONFIG_ATH79_MACH_AP152 is not set
|
||||
# CONFIG_ATH79_MACH_AP531B0 is not set
|
||||
# CONFIG_ATH79_MACH_AP90Q is not set
|
||||
# CONFIG_ATH79_MACH_AP96 is not set
|
||||
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
|
||||
|
|
|
|||
|
|
@ -13,6 +13,7 @@
|
|||
# CONFIG_ATH79_MACH_AP143 is not set
|
||||
# CONFIG_ATH79_MACH_AP147 is not set
|
||||
# CONFIG_ATH79_MACH_AP152 is not set
|
||||
# CONFIG_ATH79_MACH_AP531B0 is not set
|
||||
# CONFIG_ATH79_MACH_AP90Q is not set
|
||||
# CONFIG_ATH79_MACH_AP96 is not set
|
||||
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user