lantiq: fix vr9 ubi handling

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40364
This commit is contained in:
John Crispin 2014-04-03 14:26:24 +00:00
parent 78a3f697a5
commit 58eccdac4f
7 changed files with 66 additions and 24 deletions

View File

@ -87,8 +87,6 @@ CONFIG_LANTIQ_PHY=y
CONFIG_LANTIQ_WDT=y
CONFIG_LANTIQ_XRX200=y
CONFIG_LEDS_GPIO=y
# CONFIG_LZO_COMPRESS is not set
# CONFIG_LZO_DECOMPRESS is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set

View File

@ -6,7 +6,7 @@
model = "FRITZ3370 - Fritz!Box WLAN 3370";
chosen {
bootargs = "console=ttyLTQ0,115200";
bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
};
memory@0 {
@ -23,8 +23,13 @@
#size-cells = <1>;
partition@0 {
label = "firmware";
reg = <0x00000 0x3400000>;
label = "kernel";
reg = <0x0 0x400000>;
};
partition@400000 {
label = "rootfs_ubi";
reg = <0x400000 0x3000000>;
};
partition@3400000 {
@ -55,23 +60,16 @@
lantiq,groups = "spi", "spi_cs4";
lantiq,function = "gpio";
};
nand_out {
lantiq,groups = "nand cle", "nand ale", "nand rd", "ebu a23", "ebu a24";
lantiq,function = "ebu";
lantiq,direction = <1>;
lantiq,pull = <0>;
};
nand_in {
lantiq,groups = "nand rdy";
lantiq,function = "ebu";
lantiq,direction = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
nand {
lantiq,groups = "nand cle", "nand ale",
"nand rd", "nand cs1", "nand rdy";
lantiq,function = "ebu";
lantiq,pull = <1>;
};
phy-rst {
lantiq,pins = "io37", "io44";
lantiq,pull = <0>;
@ -104,6 +102,7 @@
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";

View File

@ -54,10 +54,10 @@ define TPLinkImageLzma
endef
define MkImageEVA
lzma2eva 0x80002000 0x80002000 $(KDIR)/vmlinux-$(1).lzma $(KDIR)/$(1).eva.prealign
dd if=$(KDIR)/$(1).eva.prealign of=$(KDIR)/$(1).eva.align.64k bs=64k conv=sync
dd if=$(KDIR)/$(1).eva.prealign of=$(KDIR)/$(1).eva.align.128k bs=128k conv=sync
cat ./eva.dummy.squashfs >> $(KDIR)/$(1).eva.align.64k
lzma2eva 0x80002000 0x80002000 $(KDIR)/vmlinux$(2)-$(1).lzma $(KDIR)/$(1)$(2).eva.prealign
dd if=$(KDIR)/$(1)$(2).eva.prealign of=$(KDIR)/$(1)$(2).eva.align.64k bs=64k conv=sync
dd if=$(KDIR)/$(1)$(2).eva.prealign of=$(KDIR)/$(1)$(2).eva.align.128k bs=128k conv=sync
cat ./eva.dummy.squashfs >> $(KDIR)/$(1)$(2).eva.align.64k
endef
define CompressGzip
@ -93,6 +93,21 @@ define Image/BuildEVA/squashfs
$(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image.eva)
endef
define Image/BuildEVA/ubifs
ifneq ($($(PROFILE)_UBIFS_OPTS),)
$(CP) $(KDIR)/root.ubifs $(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE)-rootfs.ubifs
endif
endef
define Image/BuildEVA/ubi
ifneq ($($(PROFILE)_UBI_OPTS),)
$(CP) $(KDIR)/root.ubi $(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE)-rootfs.ubi
$(CP) $(KDIR)/root-overlay.ubi $(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE)-rootfs-overlay.ubi
endif
endef
define Image/BuildLoader/squashfs
dd if=$(KDIR)/loader-$(2).bin of=$(KDIR)/loader-$(2).bin.padded bs=1536k conv=sync
cat $(KDIR)/loader-$(2).bin.padded $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).image
@ -197,6 +212,12 @@ define Image/BuildKernelEVA/Template
$(call MkImageEVA,$(1))
$(CP) $(KDIR)/$(1).eva.align.64k $(BIN_DIR)/$(IMG_PREFIX)-$(1).eva.align.64k
$(CP) $(KDIR)/$(1).eva.align.128k $(BIN_DIR)/$(IMG_PREFIX)-$(1).eva.align.128k
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
$(call PatchKernelLzma,$(1),-initramfs)
$(call MkImageEVA,$(1),-initramfs)
$(CP) $(KDIR)/$(1)-initramfs.eva.align.64k $(BIN_DIR)/$(IMG_PREFIX)-$(1)-initramfs.eva.align.64k
$(CP) $(KDIR)/$(1)-initramfs.eva.align.128k $(BIN_DIR)/$(IMG_PREFIX)-$(1)-initramfs.eva.align.128k
endif
endef
define Image/BuildKernelGzip/Template

View File

@ -0,0 +1,21 @@
[rootfs]
# Volume mode (other option is static)
mode=ubi
# Source image
image=root.squashfs
# Volume ID in UBI image
vol_id=0
# Allow for dynamic resize
vol_type=dynamic
# Volume name
vol_name=rootfs
[rootfs_data]
# Volume mode (other option is static)
mode=ubi
# Volume ID in UBI image
vol_id=1
# Allow for dynamic resize
vol_type=dynamic
# Volume name
vol_name=rootfs_data
vol_size=1MiB

View File

@ -29,7 +29,7 @@ CONFIG_MTD_NAND_XWAY=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_NLS=y
CONFIG_PCIE_LANTIQ=y

View File

@ -7,4 +7,7 @@ define Profile/FRITZ3370
ltq-vdsl-app ppp-mod-pppoa
endef
FRITZ3370_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096"
FRITZ3370_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
$(eval $(call Profile,FRITZ3370))

View File

@ -5,7 +5,7 @@ FEATURES:=squashfs atm mips16 jffs2 ubifs
CPU_TYPE:=34kc
CPU_SUBTYPE:=dsp
DEFAULT_PACKAGES+=kmod-leds-gpio kmod-gpio-button-hotplug
DEFAULT_PACKAGES+=kmod-leds-gpio kmod-gpio-button-hotplug swconfig
define Target/Description
Lantiq XRX200