183130227/tn3399_openwrt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ath79: add support for D-Link DAP-2680 A1

Browse Source 
Specifications:
 * QCA9558, 16 MiB Flash, 256 MiB RAM, 802.11n 3T3R
 * QCA9984, 802.11ac Wave 2 3T3R
 * Gigabit LAN Port (AR8035), 802.11at PoE

Installation:
 * Factory Web UI is at 192.168.0.50
   login with 'admin' and blank password, flash factory.bin
 * Recovery Web UI is at 192.168.0.50
   connect network cable, hold reset button during power-on and keep it
   pressed until uploading has started (only required when checksum is ok,
   e.g. for reverting back to oem firmware), flash factory.bin

After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
This commit is contained in:
Sebastian Schaper 2020-12-02 21:31:19 +01:00 committed by Adrian Schmutzler
parent b077accb9c
commit 5b58710fad
6 changed files with 113 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

89
target/linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts Normal file
View File

@ -0,0 +1,89 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include "qca95xx_dlink_dap-2xxx.dtsi"
/ {
compatible = "dlink,dap-2680-a1", "qca,qca9558";
model = "D-Link DAP-2680 A1";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_red;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_power_red: power_red {
label = "red:power";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
label = "green:power";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
};
&partitions {
partition@70000 {
label = "firmware";
reg = <0x70000 0xee0000>;
compatible = "wrg";
};
partition@f50000 {
label = "dlink";
reg = <0xf50000 0xa0000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x10000>;
read-only;
};
};
&mdio0 {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
};
};
&eth0 {
status = "okay";
pll-data = <0x82000000 0x80000101 0x80001313>;
phy-handle = <&phy4>;
phy-mode = "rgmii-id";
gmac-config {
device = <&gmac>;
rgmii-enabled = <1>;
rxd-delay = <3>;
rxdv-delay = <3>;
};
};
&pcie0 {
status = "okay";
};

4
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -28,6 +28,7 @@ ath79_setup_interfaces()
dlink,dap-1330-a1|\
dlink,dap-1365-a1|\
dlink,dap-2230-a1|\
dlink,dap-2680-a1|\
dlink,dir-505|\
engenius,eap300-v2|\
engenius,eap350-v1|\
@ -483,7 +484,8 @@ ath79_setup_macs()
label_mac=$lan_mac
;;
dlink,dap-2230-a1|\
dlink,dap-2660-a1)
dlink,dap-2660-a1|\
dlink,dap-2680-a1)
lan_mac=$(mtd_get_mac_ascii bdcfg "lanmac")
label_mac=$lan_mac
;;

6
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -174,6 +174,12 @@ case "$FIRMWARE" in
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
;;
dlink,dap-2680-a1)
caldata_extract "art" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-842-c3)

3
target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
View File

@ -25,7 +25,8 @@ case "$board" in
dlink,dap-2230-a1)
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;
dlink,dap-2660-a1)
dlink,dap-2660-a1|\
dlink,dap-2680-a1)
[ "$PHYNBR" -eq 1 ] && \
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;

1
target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
View File

@ -15,6 +15,7 @@ board=$(board_name)
case "$board" in
dlink,dap-2230-a1|\
dlink,dap-2660-a1|\
dlink,dap-2680-a1|\
dlink,dap-2695-a1)
fixwrgg
;;

12
target/linux/ath79/image/generic.mk
View File

@ -772,6 +772,18 @@ define Device/dlink_dap-2660-a1
endef
TARGET_DEVICES += dlink_dap-2660-a1
define Device/dlink_dap-2680-a1
$(Device/dlink_dap-2xxx)
SOC := qca9558
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DAP-2680
DEVICE_VARIANT := A1
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-ath10k-ct
IMAGE_SIZE := 15232k
DAP_SIGNATURE := wapac36_dkbs_dap2680
endef
TARGET_DEVICES += dlink_dap-2680-a1
define Device/dlink_dap-2695-a1
SOC := qca9558
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct