183130227/tn3399_openwrt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ath79: Add support for TP-Link CPE210 v3

Browse Source 
Specifications:

    * SoC: Qualcomm Atheros QCA9533 (650MHz)
    * RAM: 64MB
    * Storage: 8 MB SPI NOR
    * Wireless: 2.4GHz N based built into SoC 2x2
    * Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:
    Flash factory image through stock firmware WEB UI or TFTP
    To get to TFTP recovery just hold reset button while powering
    on for around 4-5 seconds and release.
    Rename factory image to recovery.bin
    Stock TFTP server IP:192.168.0.100
    Stock device TFTP adress:192.168.0.254

Thanks to robimarko for the work inside the ar71xx tree.
Thanks to adrianschmutzler for deep discussion and fixes.

Signed-off-by: Mario Schroen <m.schroen@web.de>
[Split into DTS/DTSI, read-only config partition in DTSI]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[renamed dtsi filename, light subject touches]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
This commit is contained in:
Mario Schroen 2019-03-31 21:07:03 +02:00 committed by Petr Štetiar
parent 99f6f2c0b8
commit 5ec205d7ac
6 changed files with 191 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
target/linux/ath79/base-files/etc/board.d/01_leds
View File

@ -123,6 +123,14 @@ tplink,archer-c6-v2)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C"
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02"
;;
tplink,cpe210-v3)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "30" "100"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100"
;;
tplink,re450-v2)
ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"

1
target/linux/ath79/base-files/etc/board.d/02_network
View File

@ -19,6 +19,7 @@ ath79_setup_interfaces()
pcs,cap324|\
pisen,wmm003n|\
pqi,air-pen|\
tplink,cpe210-v3|\
tplink,re350k-v1|\
tplink,re450-v2|\
tplink,tl-mr10u|\

9
target/linux/ath79/dts/qca9533_tplink_cpe210-v3.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "qca9533_tplink_cpe210.dtsi"
/ {
compatible = "tplink,cpe210-v3", "qca,qca9533";
model = "TP-LINK CPE210 v3";
};

125
target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi Normal file
View File

@ -0,0 +1,125 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca953x.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
leds {
compatible = "gpio-leds";
lan {
label = "tp-link:green:lan";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
link1 {
label = "tp-link:green:link1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
link2 {
label = "tp-link:green:link2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
link3 {
label = "tp-link:green:link3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
system: link4 {
label = "tp-link:green:link4";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "partition-table";
reg = <0x020000 0x10000>;
read-only;
};
info: partition@30000 {
label = "product-info";
reg = <0x030000 0x10000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x040000 0x780000>;
compatible = "tplink,firmware";
};
config: partition@7c0000 {
label = "config";
reg = <0x7c0000 0x30000>;
read-only;
};
ART: partition@7f0000 {
label = "ART";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&info 0x8>;
};
&eth1 {
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
mtd-cal-data = <&ART 0x1000>;
mtd-mac-address = <&info 0x8>;
};

13
target/linux/ath79/image/generic-tp-link.mk
View File

@ -109,6 +109,19 @@ define Device/tplink_archer-c7-v5
endef
TARGET_DEVICES += tplink_archer-c7-v5
define Device/tplink_cpe210-v3
$(Device/tplink-safeloader)
ATH_SOC := qca9533
IMAGE_SIZE := 7680k
DEVICE_TITLE := TP-Link CPE210 v3
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := CPE210V3
LOADER_TYPE := elf
KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header -O
SUPPORTED_DEVICES += cpe210-v3
endef
TARGET_DEVICES += tplink_cpe210-v3
define Device/tplink_re350k-v1
$(Device/tplink)
ATH_SOC := qca9558

35
tools/firmware-utils/src/tplink-safeloader.c
View File

@ -196,6 +196,41 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "support-list",
},
/** Firmware layout for the CPE210 V3 */
{
.id = "CPE210V3",
.vendor = "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
.support_list =
"SupportList:\r\n"
"CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
"CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
"CPE210(TP-LINK|UN|N300-2):3.0\r\n"
"CPE210(TP-LINK|EU|N300-2):3.0\r\n",
.support_trail = '\xff',
.soft_ver = NULL,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"partition-table", 0x20000, 0x01000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"device-info", 0x31400, 0x00400},
{"signature", 0x32000, 0x00400},
{"device-id", 0x33000, 0x00100},
{"firmware", 0x40000, 0x770000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x01000},
{"user-config", 0x7c0000, 0x10000},
{"default-config", 0x7d0000, 0x10000},
{"log", 0x7e0000, 0x10000},
{"radio", 0x7f0000, 0x10000},
{NULL, 0, 0}
},
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "support-list",
},
/** Firmware layout for the CPE510/520 */
{
.id = "CPE510",