ar71xx: Configure WNDR3700 switch LED colors properly (#8103)

For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23879
This commit is contained in:
Felix Fietkau 2010-11-04 18:55:16 +00:00
parent b3b2227869
commit 5f3f1b8cd8

View File

@ -32,16 +32,16 @@ config switch_port
# the switch and the section does not correspond to a real
# switch port.
#
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3-1000MB/s
# 4=100 MB/s; 5=10 MB/s; 6=1000 MB/s+activity; 7=100 MB/s+activity
# 8=10 MB/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
# 14: Link (master); 15: separate register
option device rtl8366s
option port 1
option led 9
option led 6
config switch_port
# Port 2 controls the ORANGE configuration of LEDs for
# the switch and the section does not correspond to a real
@ -52,8 +52,7 @@ config switch_port
option device rtl8366s
option port 2
option led 6
option led 9
config switch_port
# Port 5 controls the configuration of the WAN LED and the
@ -67,5 +66,4 @@ config switch_port
option device rtl8366s
option port 5
option led 6
option led 2