ramips: phy: at803x: Select SFP interface mode that both sides supports.
Currently sfp_select_interface() return the fastest interface that the sfp modules supports even if the phy don't support that mode. For example an GPON module that support both 2500basex and 1000basex. Currently sfp_select_interface() picks 2500basex instead of 1000basex. So limit the interfaces which both sides supports before calling sfp_select_interface() or return an error if we don't have match. Reviewed-by: John Thomson <git@johnthomson.fastmail.com.au> Tested-by: Braihan Cantera <bcanterac@gmail.com> [MikroTik RB760iGS + Nokia G-010S-A 3FE46541AA SFP] Tested-by: John Thomson <git@johnthomson.fastmail.com.au> [Mikrotik rb760igs + SFP SM/LC, SFP base1000T, SFP+ passive DAC] Signed-off-by: René van Dorst <opensource@vdorst.com>
This commit is contained in:
René van Dorst
Petr Štetiar
parent
991e6f8ccc
commit
6e1a4496f5
|
|
@ -1,6 +1,6 @@
|
|||
From 60ae82b0ea56c279be384b99cd2a42ae5ba7c5c7 Mon Sep 17 00:00:00 2001
|
||||
From 924453aa9d2324e5611f8e2b71df746d8f0c79f1 Mon Sep 17 00:00:00 2001
|
||||
From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
|
||||
Date: Mon, 4 Nov 2019 22:22:17 +0100
|
||||
Date: Fri, 13 Nov 2020 16:11:32 +0100
|
||||
Subject: [PATCH] net: phy: at803x: add support for SFP module in
|
||||
RGMII-to-x-base mode
|
||||
MIME-Version: 1.0
|
||||
|
|
@ -9,20 +9,23 @@ Content-Transfer-Encoding: 8bit
|
|||
|
||||
Signed-off-by: René van Dorst <opensource@vdorst.com>
|
||||
---
|
||||
drivers/net/phy/at803x.c | 74 ++++++++++++++++++++++++++++++++++++++++
|
||||
1 file changed, 74 insertions(+)
|
||||
drivers/net/phy/at803x.c | 91 ++++++++++++++++++++++++++++++++++++++++
|
||||
1 file changed, 91 insertions(+)
|
||||
|
||||
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
|
||||
index 31cd7d8a5a1b5..134c894ccf800 100644
|
||||
--- a/drivers/net/phy/at803x.c
|
||||
+++ b/drivers/net/phy/at803x.c
|
||||
@@ -14,6 +14,7 @@
|
||||
@@ -14,6 +14,8 @@
|
||||
#include <linux/etherdevice.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
+#include <linux/sfp.h>
|
||||
+#include <linux/phylink.h>
|
||||
|
||||
#define AT803X_SPECIFIC_STATUS 0x11
|
||||
#define AT803X_SS_SPEED_MASK (3 << 14)
|
||||
@@ -53,9 +54,18 @@
|
||||
@@ -53,9 +55,18 @@
|
||||
|
||||
#define AT803X_MODE_CFG_MASK 0x0F
|
||||
#define AT803X_MODE_CFG_SGMII 0x01
|
||||
|
|
@ -41,7 +44,7 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
|
|||
|
||||
#define AT803X_DEBUG_REG_0 0x00
|
||||
#define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)
|
||||
@@ -243,10 +253,56 @@ static int at803x_resume(struct phy_devi
|
||||
@@ -243,10 +254,72 @@ static int at803x_resume(struct phy_device *phydev)
|
||||
return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0);
|
||||
}
|
||||
|
||||
|
|
@ -59,23 +62,39 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
|
|||
+
|
||||
+static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
|
||||
+{
|
||||
+ struct phy_device *phydev = upstream;
|
||||
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(at803x_support) = { 0, };
|
||||
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
|
||||
+ struct phy_device *phydev = upstream;
|
||||
+ phy_interface_t iface;
|
||||
+
|
||||
+ phylink_set(at803x_support, 1000baseX_Full);
|
||||
+ /* AT803x only support 1000baseX but SGMII works fine when module runs
|
||||
+ * at 1Gbit.
|
||||
+ */
|
||||
+ phylink_set(at803x_support, 1000baseT_Full);
|
||||
+
|
||||
+ sfp_parse_support(phydev->sfp_bus, id, support);
|
||||
+
|
||||
+ // Limit to interfaces that both sides support
|
||||
+ linkmode_and(support, support, at803x_support);
|
||||
+
|
||||
+ if (linkmode_empty(support))
|
||||
+ goto unsupported_mode;
|
||||
+
|
||||
+ iface = sfp_select_interface(phydev->sfp_bus, support);
|
||||
+
|
||||
+ if (iface != PHY_INTERFACE_MODE_SGMII &&
|
||||
+ iface != PHY_INTERFACE_MODE_1000BASEX) {
|
||||
+ dev_info(&phydev->mdio.dev, "incompatible SFP module inserted;"
|
||||
+ "Only SGMII/1000BASEX are supported!\n");
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+ iface != PHY_INTERFACE_MODE_1000BASEX)
|
||||
+ goto unsupported_mode;
|
||||
+
|
||||
+ dev_info(&phydev->mdio.dev, "SFP interface %s", phy_modes(iface));
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+unsupported_mode:
|
||||
+ dev_info(&phydev->mdio.dev, "incompatible SFP module inserted;"
|
||||
+ "Only SGMII at 1Gbit/1000BASEX are supported!\n");
|
||||
+ return -EINVAL;
|
||||
+}
|
||||
+
|
||||
+static const struct sfp_upstream_ops at803x_sfp_ops = {
|
||||
|
|
@ -98,7 +117,7 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
|
|||
|
||||
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
@@ -394,6 +450,10 @@ static int at803x_read_status(struct phy
|
||||
@@ -394,6 +467,10 @@ static int at803x_read_status(struct phy_device *phydev)
|
||||
{
|
||||
int ss, err, old_link = phydev->link;
|
||||
|
||||
|
|
@ -109,7 +128,7 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
|
|||
/* Update the link, but return if there was an error */
|
||||
err = genphy_update_link(phydev);
|
||||
if (err)
|
||||
@@ -448,6 +508,19 @@ static int at803x_read_status(struct phy
|
||||
@@ -448,6 +525,19 @@ static int at803x_read_status(struct phy_device *phydev)
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -129,7 +148,7 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
|
|||
static struct phy_driver at803x_driver[] = {
|
||||
{
|
||||
/* ATHEROS 8035 */
|
||||
@@ -491,6 +564,7 @@ static struct phy_driver at803x_driver[]
|
||||
@@ -491,6 +581,7 @@ static struct phy_driver at803x_driver[] = {
|
||||
.suspend = at803x_suspend,
|
||||
.resume = at803x_resume,
|
||||
/* PHY_GBIT_FEATURES */
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user