madwifi: add patch for building all modules (except for the HAL) into a single module. saves space and gets rid of unnecessary exports removes support for onoe and amrr - I don't think anybody needs these anymore

SVN-Revision: 17314
This commit is contained in:
Felix Fietkau 2009-08-19 15:13:00 +00:00
parent 2bb863f337
commit 6fb461da2b
3 changed files with 801 additions and 37 deletions

View File

@ -30,6 +30,15 @@ config MADWIFI_UPSTREAM
endchoice
config MADWIFI_SINGLE_MODULE
bool "Combine driver and net80211 into a single module"
depends on PACKAGE_kmod-madwifi
default y
help
This option combines all driver and stack related code (except for HAL)
into a single module, thus saving space and removing unnecessary kernel
exports
choice
prompt "Rate control algorithm selection"
depends on PACKAGE_kmod-madwifi
@ -46,38 +55,6 @@ config MADWIFI_RCA_MINSTREL
always wander in directions where he/she feels he/she will get paid
the best for his/her work.
config MADWIFI_RCA_ONOE
bool "Use the Onoe rate control algorithm"
help
Onoe is a credit based RCA where the value of the credit is determined
by the frequency of successful, erroneous and retransmissions
accumulated during a fixed invocation period of 1000 ms. If less than
10% of the packets need to be retransmitted at a particular rate, Onoe
keeps increasing its credit point till the threshold value of 10 is
reached. At this point, the current transmission rate is increased to
the next available higher rate and the process repeated with credit
score of zero. Similar logic holds for deducting the credit score and
moving to a lower bit-rate for failed packet
transmission/retransmission attempts. However, once a bit-rate has
been marked as failure in the previous attempt, Onoe will not attempt
to select that bit-rate until 10 seconds have elapsed since the last
attempt. Due to the manner in which it operates, Onoe is conservative
in rate selection and is less sensitive to individual packet failure.
config MADWIFI_RCA_AMRR
bool "Use the AMRR rate control algorithm"
help
AMRR uses Binary Exponential Backoff (BEB) technique to adapt the
length (threshold) of the sampling period used to change the values of
bit-rate and transmission count parameters. It uses probe packets and
depending on their transmission status adaptively changes the threshold
value. The adaptation mechanism ensures fewer failed
transmission/retransmission and higher throughput by not switching to a
higher rate as specified by the backoff mechanism. In addition to this,
the AMRR employs heuristics to capture the short-term variations of the
channel by judiciously setting the rate and transmission count
parameters.
config MADWIFI_RCA_SAMPLERATE
bool "Use the SampleRate rate control algorithm"
help

View File

@ -124,6 +124,9 @@ ifdef CONFIG_MADWIFI_RCA_SAMPLERATE
RATE_CONTROL:=sample
endif
ifneq ($(CONFIG_MADWIFI_SINGLE_MODULE),)
MADWIFI_FILES:= $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX)
else
MADWIFI_FILES:= \
$(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
@ -134,8 +137,12 @@ MADWIFI_FILES:= \
$(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX)
endif
ifneq ($(CONFIG_MADWIFI_SINGLE_MODULE),)
MADWIFI_AUTOLOAD:= ath_hal
else
MADWIFI_AUTOLOAD:= \
wlan \
wlan_scan_ap \
@ -146,7 +153,8 @@ MADWIFI_AUTOLOAD:= \
wlan_ccmp \
wlan_tkip \
wlan_wep \
wlan_xauth \
wlan_xauth
endif
ifeq ($(findstring AHB,$(BUS)),AHB)
MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
@ -202,14 +210,15 @@ MAKE_ARGS:= \
TOOLPATH="$(KERNEL_CROSS)" \
KERNELPATH="$(LINUX_DIR)" \
LDOPTS="--no-warn-mismatch " \
ATH_RATE="ath_rate/$(RATE_CONTROL)" \
ATH_RATE="$(RATE_CONTROL)" \
ATH_CAP_SUPERG_COMP="$(COMPRESSION)" \
DO_MULTI=1 \
SINGLE_MODULE=$(if $(CONFIG_MADWIFI_SINGLE_MODULE),1) \
INCS="$(MADWIFI_INC)" \
$(if $(CONFIG_MADWIFI_DEBUG),,DEBUG=) WARNINGS="-Wno-unused"
MAKE_VARS:= \
COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"' -DATH_REVERSE_ENGINEERING=1" \
COPTS="-DATH_REVERSE_ENGINEERING=1" \
ifeq ($(CONFIG_MADWIFI_UPSTREAM),)
define Build/Prepare/HAL

View File

@ -0,0 +1,778 @@
--- a/ath/Makefile
+++ b/ath/Makefile
@@ -41,7 +41,6 @@
#
obj := $(firstword $(obj) $(SUBDIRS) .)
-TOP = $(obj)/..
ifeq ($(strip $(BUS)),AHB)
BUSNAME=ahb
@@ -57,7 +56,24 @@ COPTS += -DDFS_DOMAIN_ETSI -DDFS_DOMAIN_
include $(TOP)/Makefile.inc
obj-m += ath_$(BUSNAME).o
-ath_$(BUSNAME)-objs := if_ath.o if_ath_radar.o if_ath_$(BUSNAME).o
+ath_objs := if_ath.o if_ath_radar.o if_ath_$(BUSNAME).o
+ath_$(BUSNAME)-objs := $(ath_objs)
+
+ifneq ($(SINGLE_MODULE),)
+include $(TOP)/net80211/Makefile
+include $(TOP)/ath_rate/sample/Makefile
+include $(TOP)/ath_rate/minstrel/Makefile
+RC_DECLARE=$(foreach R,$(ATH_RATE),extern void ath_rate_$(R)_init(void);extern void ath_rate_$(R)_exit(void);)
+RC_INIT=$(foreach R,$(ATH_RATE),ath_rate_$(R)_init();)
+RC_EXIT=$(foreach R,$(ATH_RATE),ath_rate_$(R)_exit();)
+
+ath_$(BUSNAME)-objs += $(patsubst %,../net80211/%,$(wlan-objs) $(foreach var,wep tkip ccmp acl xauth scan_sta scan_ap,$(wlan_$(var)-objs))) $(foreach RC,$(ATH_RATE),$(patsubst %,../ath_rate/$(RC)/%,$(ath_rate_$(RC)-objs)))
+ifdef LINUX24
+ ath_$(BUSNAME)-linkobjs := $(ath_objs) $(wlan-objs) $(foreach var,wep tkip ccmp acl xauth scan_sta scan_ap,$(wlan_$(var)-objs)) $(foreach RC,$(ATH_RATE),$(ath_rate_$(RC)-objs))
+endif
+
+EXTRA_CFLAGS += -DSINGLE_MODULE -DRC_INIT="$(RC_INIT)" -DRC_EXIT="$(RC_EXIT)" -DRC_DECLARE="$(RC_DECLARE)"
+endif
INCS += -I$(TOP) -I$(ATH_HAL) -I$(HAL) -I$(WLAN)
@@ -72,13 +88,8 @@ install:
test -d $(DESTDIR)/$(KMODPATH) || mkdir -p $(DESTDIR)/$(KMODPATH)
install -m 0644 ath_$(BUSNAME).$(KMODSUF) $(DESTDIR)/$(KMODPATH)
-clean:
- rm -f *~ *.o *.ko *.mod.c .*.cmd
- rm -f .depend .version .*.o.flags .*.o.d
- rm -rf .tmp_versions
-
ath_$(BUSNAME).o: $(ath_$(BUSNAME)-objs)
- $(LD) $(LDOPTS) -o ath_$(BUSNAME).$(KMODSUF) -r $(ath_$(BUSNAME)-objs)
+ $(LD) $(LDOPTS) -o ath_$(BUSNAME).$(KMODSUF) -r $(if $(ath_$(BUSNAME)-linkobjs),$(ath_$(BUSNAME)-linkobjs),$(ath_$(BUSNAME)-objs))
if_ath_hal.h: $(HAL)/ah.h
$(TOP)/scripts/if_ath_hal_generator.pl $< $@
--- a/net80211/ieee80211_acl.c
+++ b/net80211/ieee80211_acl.c
@@ -281,16 +281,6 @@ acl_getpolicy(struct ieee80211vap *vap)
return as->as_policy;
}
-/*
- * Module glue.
- */
-
-MODULE_AUTHOR("Errno Consulting, Sam Leffler");
-MODULE_DESCRIPTION("802.11 wireless support: MAC-based ACL policy");
-#ifdef MODULE_LICENSE
-MODULE_LICENSE("Dual BSD/GPL");
-#endif
-
static const struct ieee80211_aclator mac = {
.iac_name = "mac",
.iac_attach = acl_attach,
@@ -303,6 +293,18 @@ static const struct ieee80211_aclator ma
.iac_getpolicy = acl_getpolicy,
};
+#include "module.h"
+/*
+ * Module glue.
+ */
+
+MODULE_AUTHOR("Errno Consulting, Sam Leffler");
+MODULE_DESCRIPTION("802.11 wireless support: MAC-based ACL policy");
+#ifdef MODULE_LICENSE
+MODULE_LICENSE("Dual BSD/GPL");
+#endif
+
+
static int __init
init_ieee80211_acl(void)
{
--- a/net80211/ieee80211_crypto_ccmp.c
+++ b/net80211/ieee80211_crypto_ccmp.c
@@ -686,6 +686,8 @@ ccmp_decrypt(struct ieee80211_key *key,
}
#undef CCMP_DECRYPT
+#include "module.h"
+
/*
* Module glue.
*/
--- a/net80211/ieee80211_crypto_tkip.c
+++ b/net80211/ieee80211_crypto_tkip.c
@@ -1046,6 +1046,8 @@ tkip_decrypt(struct tkip_ctx *ctx, struc
return 1;
}
+#include "module.h"
+
/*
* Module glue.
*/
--- a/net80211/ieee80211_crypto_wep.c
+++ b/net80211/ieee80211_crypto_wep.c
@@ -497,6 +497,8 @@ wep_decrypt(struct ieee80211_key *key, s
* Module glue.
*/
+#include "module.h"
+
MODULE_AUTHOR("Errno Consulting, Sam Leffler");
MODULE_DESCRIPTION("802.11 wireless support: WEP cipher");
#ifdef MODULE_LICENSE
--- a/net80211/ieee80211_linux.c
+++ b/net80211/ieee80211_linux.c
@@ -1015,6 +1015,10 @@ static struct notifier_block ieee80211_e
static char *version = RELEASE_VERSION;
static char *dev_info = "wlan";
+extern void ieee80211_auth_setup(void);
+
+#include "module.h"
+
MODULE_AUTHOR("Errno Consulting, Sam Leffler");
MODULE_DESCRIPTION("802.11 wireless LAN protocol support");
#ifdef MODULE_VERSION
@@ -1024,8 +1028,6 @@ MODULE_VERSION(RELEASE_VERSION);
MODULE_LICENSE("Dual BSD/GPL");
#endif
-extern void ieee80211_auth_setup(void);
-
static int __init
init_wlan(void)
{
--- a/net80211/ieee80211_scan_ap.c
+++ b/net80211/ieee80211_scan_ap.c
@@ -763,15 +763,6 @@ action_tasklet(IEEE80211_TQUEUE_ARG data
(*ss->ss_ops->scan_default)(vap, &as->as_selbss);
}
-/*
- * Module glue.
- */
-MODULE_AUTHOR("Errno Consulting, Sam Leffler");
-MODULE_DESCRIPTION("802.11 wireless support: default ap scanner");
-#ifdef MODULE_LICENSE
-MODULE_LICENSE("Dual BSD/GPL");
-#endif
-
static const struct ieee80211_scanner ap_default = {
.scan_name = "default",
.scan_attach = ap_attach,
@@ -789,6 +780,16 @@ static const struct ieee80211_scanner ap
.scan_default = ap_default_action,
};
+#include "module.h"
+
+/*
+ * Module glue.
+ */
+MODULE_AUTHOR("Errno Consulting, Sam Leffler");
+MODULE_DESCRIPTION("802.11 wireless support: default ap scanner");
+#ifdef MODULE_LICENSE
+MODULE_LICENSE("Dual BSD/GPL");
+#endif
static int __init
init_scanner_ap(void)
--- a/net80211/ieee80211_scan_sta.c
+++ b/net80211/ieee80211_scan_sta.c
@@ -1208,6 +1208,8 @@ action_tasklet(IEEE80211_TQUEUE_ARG data
ieee80211_start_scan(vap, ss->ss_flags, ss->ss_duration, ss->ss_nssid, ss->ss_ssid);
}
+#include "module.h"
+
/*
* Module glue.
*/
@@ -1217,6 +1219,7 @@ MODULE_DESCRIPTION("802.11 wireless supp
MODULE_LICENSE("Dual BSD/GPL");
#endif
+
static int __init
init_scanner_sta(void)
{
--- a/net80211/ieee80211_xauth.c
+++ b/net80211/ieee80211_xauth.c
@@ -65,15 +65,6 @@
#include <net80211/ieee80211_var.h>
/*
- * Module glue.
- */
-MODULE_AUTHOR("Errno Consulting, Sam Leffler");
-MODULE_DESCRIPTION("802.11 wireless support: external (user mode) authenticator");
-#ifdef MODULE_LICENSE
-MODULE_LICENSE("Dual BSD/GPL");
-#endif
-
-/*
* One module handles everything for now. May want
* to split things up for embedded applications.
*/
@@ -85,6 +76,18 @@ static const struct ieee80211_authentica
.ia_node_leave = NULL,
};
+#include "module.h"
+
+/*
+ * Module glue.
+ */
+MODULE_AUTHOR("Errno Consulting, Sam Leffler");
+MODULE_DESCRIPTION("802.11 wireless support: external (user mode) authenticator");
+#ifdef MODULE_LICENSE
+MODULE_LICENSE("Dual BSD/GPL");
+#endif
+
+
static int __init
init_ieee80211_xauth(void)
{
--- a/net80211/Makefile
+++ b/net80211/Makefile
@@ -40,7 +40,11 @@
# Makefile for the 802.11 WLAN modules.
#
obj := $(firstword $(obj) $(SUBDIRS) .)
-TOP = $(obj)/..
+
+include $(TOP)/Makefile.inc
+
+ifeq ($(SINGLE_MODULE),)
+
#
# There is one authenticator mechanism: an in-kernel implementation
# (wlan_xauth).
@@ -59,29 +63,8 @@ MOD_INSTALL := wlan.o wlan_wep.o wlan_tk
obj-m += $(MOD_INSTALL)
-wlan-objs := if_media.o \
- ieee80211_skb.o \
- ieee80211.o ieee80211_beacon.o ieee80211_crypto.o \
- ieee80211_crypto_none.o ieee80211_input.o ieee80211_node.o \
- ieee80211_output.o ieee80211_power.o ieee80211_proto.o \
- ieee80211_scan.o ieee80211_wireless.o ieee80211_linux.o \
- ieee80211_monitor.o ieee80211_rate.o
-wlan_wep-objs := ieee80211_crypto_wep.o
-wlan_tkip-objs := ieee80211_crypto_tkip.o
-wlan_ccmp-objs := ieee80211_crypto_ccmp.o
-wlan_acl-objs := ieee80211_acl.o
-wlan_xauth-objs := ieee80211_xauth.o
-wlan_scan_sta-objs :=ieee80211_scan_sta.o
-wlan_scan_ap-objs := ieee80211_scan_ap.o
-
-include $(TOP)/Makefile.inc
-
INCS += -I$(TOP) -I$(ATH_HAL) -I$(HAL)
-EXTRA_CFLAGS+=$(INCS) $(COPTS) -DOPT_AH_H=\"public/$(TARGET).opt_ah.h\"
-
--include $(TOPDIR)/Rules.make
-
all:
$(MAKE) -C $(KERNELPATH) SUBDIRS=$(shell pwd) modules
@@ -108,8 +91,28 @@ install:
f=`basename $$i .o`; \
install -m 0644 $$f.$(KMODSUF) $(DESTDIR)/$(KMODPATH); \
done
+else
+all:
+endif
+
+wlan-objs := if_media.o \
+ ieee80211_skb.o \
+ ieee80211.o ieee80211_beacon.o ieee80211_crypto.o \
+ ieee80211_crypto_none.o ieee80211_input.o ieee80211_node.o \
+ ieee80211_output.o ieee80211_power.o ieee80211_proto.o \
+ ieee80211_scan.o ieee80211_wireless.o ieee80211_linux.o \
+ ieee80211_monitor.o ieee80211_rate.o
+wlan_wep-objs := ieee80211_crypto_wep.o
+wlan_tkip-objs := ieee80211_crypto_tkip.o
+wlan_ccmp-objs := ieee80211_crypto_ccmp.o
+wlan_acl-objs := ieee80211_acl.o
+wlan_xauth-objs := ieee80211_xauth.o
+wlan_scan_sta-objs :=ieee80211_scan_sta.o
+wlan_scan_ap-objs := ieee80211_scan_ap.o
+
+
+EXTRA_CFLAGS+=$(INCS) $(COPTS) -DOPT_AH_H=\"public/$(TARGET).opt_ah.h\"
+
+-include $(TOPDIR)/Rules.make
+
-clean:
- -rm -f *~ *.o *.ko *.mod.c
- -rm -f .depend .version .*.o.flags .*.o.d .*.o.cmd .*.ko.cmd
- -rm -rf .tmp_versions
--- /dev/null
+++ b/net80211/module.h
@@ -0,0 +1,19 @@
+#ifdef SINGLE_MODULE
+
+#undef static
+#define static
+#undef module_init
+#undef module_exit
+#define module_init(...)
+#define module_exit(...)
+
+#undef MODULE_AUTHOR
+#undef MODULE_LICENSE
+#undef MODULE_VERSION
+#undef MODULE_DESCRIPTION
+#define MODULE_AUTHOR(...)
+#define MODULE_LICENSE(...)
+#define MODULE_VERSION(...)
+#define MODULE_DESCRIPTION(...)
+
+#endif
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -13777,3 +13777,5 @@ cleanup_ath_buf(struct ath_softc *sc, st
return bf;
}
+
+
--- a/net80211/ieee80211.c
+++ b/net80211/ieee80211.c
@@ -42,6 +42,7 @@
#include <linux/config.h>
#endif
#include <linux/version.h>
+#include <linux/init.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
@@ -2014,3 +2015,65 @@ ieee80211_build_sc_ie(struct ieee80211co
int ath_debug_global = 0;
EXPORT_SYMBOL(ath_debug_global);
+#ifdef SINGLE_MODULE
+typedef void (*initfunc)(void);
+
+extern void init_ieee80211_acl(void);
+extern void init_crypto_ccmp(void);
+extern void init_crypto_tkip(void);
+extern void init_crypto_wep(void);
+extern void init_wlan(void);
+extern void init_scanner_ap(void);
+extern void init_scanner_sta(void);
+extern void init_ieee80211_xauth(void);
+
+extern void exit_ieee80211_acl(void);
+extern void exit_crypto_ccmp(void);
+extern void exit_crypto_tkip(void);
+extern void exit_crypto_wep(void);
+extern void exit_wlan(void);
+extern void exit_scanner_ap(void);
+extern void exit_scanner_sta(void);
+extern void exit_ieee80211_xauth(void);
+
+static __initdata initfunc net80211_init[] = {
+ init_wlan,
+ init_ieee80211_acl,
+ init_crypto_ccmp,
+ init_crypto_tkip,
+ init_crypto_wep,
+ init_ieee80211_xauth,
+ init_scanner_ap,
+ init_scanner_sta,
+};
+
+static __exitdata initfunc net80211_exit[] = {
+ exit_crypto_ccmp,
+ exit_crypto_tkip,
+ exit_crypto_wep,
+ exit_scanner_ap,
+ exit_scanner_sta,
+ exit_ieee80211_xauth,
+ exit_ieee80211_acl,
+ exit_wlan,
+};
+
+void net80211_init_module(void)
+{
+ int i;
+ for (i = 0; i < sizeof(net80211_init)/sizeof(net80211_init[0]); i++) {
+ if (net80211_init[i])
+ net80211_init[i]();
+ }
+}
+
+void net80211_exit_module(void)
+{
+ int i;
+ for (i = 0; i < sizeof(net80211_exit)/sizeof(net80211_exit[0]); i++) {
+ if (net80211_exit[i])
+ net80211_exit[i]();
+ }
+}
+
+#endif
--- a/ath/if_ath_ahb.c
+++ b/ath/if_ath_ahb.c
@@ -447,10 +447,18 @@ MODULE_SUPPORTED_DEVICE("Atheros WLAN ca
MODULE_LICENSE("Dual BSD/GPL");
#endif
+#ifdef SINGLE_MODULE
+RC_DECLARE
+#endif
+
static int __init
init_ath_ahb(void)
{
printk(KERN_INFO "%s: %s\n", dev_info, version);
+#ifdef SINGLE_MODULE
+ net80211_init_module();
+ RC_INIT
+#endif
platform_driver_register(&ahb_wmac_driver);
ath_sysctl_register();
@@ -463,6 +471,10 @@ exit_ath_ahb(void)
{
ath_sysctl_unregister();
platform_driver_unregister(&ahb_wmac_driver);
+#ifdef SINGLE_MODULE
+ RC_EXIT
+ net80211_exit_module();
+#endif
printk(KERN_INFO "%s: driver unloaded\n", dev_info);
}
module_exit(exit_ath_ahb);
--- a/ath/if_ath_pci.c
+++ b/ath/if_ath_pci.c
@@ -415,11 +415,19 @@ MODULE_SUPPORTED_DEVICE("Atheros WLAN ca
MODULE_LICENSE("Dual BSD/GPL");
#endif
+#ifdef SINGLE_MODULE
+RC_DECLARE
+#endif
+
static int __init
init_ath_pci(void)
{
printk(KERN_INFO "%s: %s\n", dev_info, version);
+#ifdef SINGLE_MODULE
+ net80211_init_module();
+ RC_INIT
+#endif
if (pci_register_driver(&ath_pci_driver) < 0) {
printk(KERN_ERR "%s: No devices found, driver not installed.\n", dev_info);
return (-ENODEV);
@@ -434,6 +442,10 @@ exit_ath_pci(void)
{
ath_sysctl_unregister();
pci_unregister_driver(&ath_pci_driver);
+#ifdef SINGLE_MODULE
+ RC_EXIT
+ net80211_exit_module();
+#endif
printk(KERN_INFO "%s: driver unloaded\n", dev_info);
}
--- a/ath_rate/minstrel/Makefile
+++ b/ath_rate/minstrel/Makefile
@@ -39,9 +39,7 @@
# Makefile for the Atheros Rate Control Support.
#
obj := $(firstword $(obj) $(SUBDIRS) .)
-TOP = $(obj)/../..
-obj-m += ath_rate_minstrel.o
ath_rate_minstrel-objs := minstrel.o
include $(TOP)/Makefile.inc
@@ -50,6 +48,10 @@ INCS += -I$(TOP) -I$(ATH) -I$(ATH_HAL) -
EXTRA_CFLAGS+= $(INCS) $(COPTS) -DOPT_AH_H=\"public/$(TARGET).opt_ah.h\"
+ifeq ($(SINGLE_MODULE),)
+
+obj-m += ath_rate_minstrel.o
+
-include $(TOPDIR)/Rules.make
all:
@@ -59,10 +61,9 @@ install:
test -d $(DESTDIR)/$(KMODPATH) || mkdir -p $(DESTDIR)/$(KMODPATH)
install -m 0644 ath_rate_minstrel.$(KMODSUF) $(DESTDIR)/$(KMODPATH)
-clean:
- -rm -f *~ *.o *.ko *.mod.c
- -rm -f .depend .version .*.o.flags .*.o.d .*.o.cmd .*.ko.cmd
- -rm -rf .tmp_versions
-
ath_rate_minstrel.o: $(ath_rate_minstrel-objs)
$(LD) $(LDOPTS) -o ath_rate_minstrel.$(KMODSUF) -r $(ath_rate_minstrel-objs)
+else
+all:
+install:
+endif
--- a/ath_rate/minstrel/minstrel.c
+++ b/ath_rate/minstrel/minstrel.c
@@ -945,6 +945,8 @@ static struct ieee80211_rate_ops ath_rat
.dynamic_proc_register = ath_rate_dynamic_proc_register,
};
+#include <net80211/module.h>
+
MODULE_AUTHOR("John Bicket/Derek Smithies");
MODULE_DESCRIPTION("Minstrel Rate bit-rate selection algorithm for Atheros devices");
#ifdef MODULE_VERSION
--- a/net80211/ieee80211_var.h
+++ b/net80211/ieee80211_var.h
@@ -47,6 +47,7 @@
#include <net80211/ieee80211_power.h>
#include <net80211/ieee80211_proto.h>
#include <net80211/ieee80211_scan.h>
+#include "symbol.h"
/* NB:
* - Atheros chips use 6 bits when power is specified in whole dBm units, with
@@ -741,6 +742,8 @@ void ieee80211_dfs_action(struct ieee802
void ieee80211_expire_channel_excl_restrictions(struct ieee80211com *);
void ieee80211_setpuregbasicrates(struct ieee80211_rateset *rs);
int ieee80211_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
+void net80211_init_module(void);
+void net80211_exit_module(void);
/*
* Iterate through ic_channels to enumerate all distinct ic_ieee channel numbers.
--- a/net80211/ieee80211_linux.h
+++ b/net80211/ieee80211_linux.h
@@ -521,7 +521,10 @@ extern struct sk_buff * ieee80211_getmgt
#define IF_DRAIN(_q) skb_queue_drain(_q)
extern void skb_queue_drain(struct sk_buff_head *q);
-#ifndef __MOD_INC_USE_COUNT
+#ifdef SINGLE_MODULE
+#define _MOD_DEC_USE(_m) do {} while(0)
+#define _MOD_INC_USE(_m, _err) do {} while(0)
+#elif !defined(__MOD_INC_USE_COUNT)
#define _MOD_INC_USE(_m, _err) \
if (!try_module_get(_m)) { \
printk(KERN_WARNING "%s: try_module_get failed\n", \
--- a/ath_rate/sample/Makefile
+++ b/ath_rate/sample/Makefile
@@ -39,9 +39,7 @@
# Makefile for the Atheros Rate Control Support.
#
obj := $(firstword $(obj) $(SUBDIRS) .)
-TOP = $(obj)/../..
-obj-m += ath_rate_sample.o
ath_rate_sample-objs := sample.o
include $(TOP)/Makefile.inc
@@ -50,6 +48,9 @@ INCS += -I$(TOP) -I$(ATH) -I$(ATH_HAL) -
EXTRA_CFLAGS+= $(INCS) $(COPTS) -DOPT_AH_H=\"public/$(TARGET).opt_ah.h\"
+ifeq ($(SINGLE_MODULE),)
+obj-m += ath_rate_sample.o
+
-include $(TOPDIR)/Rules.make
all:
@@ -59,10 +60,9 @@ install:
test -d $(DESTDIR)/$(KMODPATH) || mkdir -p $(DESTDIR)/$(KMODPATH)
install -m 0644 ath_rate_sample.$(KMODSUF) $(DESTDIR)/$(KMODPATH)
-clean:
- -rm -f *~ *.o *.ko *.mod.c
- -rm -f .depend .version .*.o.flags .*.o.d .*.o.cmd .*.ko.cmd
- -rm -rf .tmp_versions
-
ath_rate_sample.o: $(ath_rate_sample-objs)
$(LD) $(LDOPTS) -o ath_rate_sample.$(KMODSUF) -r $(ath_rate_sample-objs)
+else
+all:
+install:
+endif
--- a/Makefile
+++ b/Makefile
@@ -41,7 +41,7 @@
#
obj := $(firstword $(obj) $(SUBDIRS) .)
-TOP = $(obj)
+export TOP:=$(if $(wildcard $(firstword $(SUBDIRS))/Makefile.inc),$(firstword $(SUBDIRS)),$(CURDIR))
ifneq (svnversion.h,$(MAKECMDGOALS))
include $(TOP)/Makefile.inc
@@ -54,7 +54,7 @@ all: modules tools
modules: configcheck svnversion.h
ifdef LINUX24
for i in $(obj-y); do \
- $(MAKE) -C $$i || exit 1; \
+ $(MAKE) -C $$i TOP="$(TOP)" || exit 1; \
done
else
$(MAKE) -C $(KERNELPATH) SUBDIRS=$(shell pwd) modules
@@ -89,7 +89,7 @@ install-modules: modules
sh scripts/find-madwifi-modules.sh -r $(KERNELRELEASE) $(DESTDIR)
for i in $(obj-y); do \
- $(MAKE) -C $$i install || exit 1; \
+ $(MAKE) -C $$i install TOP="$(TOP)" || exit 1; \
done
ifeq ($(DESTDIR),)
(export KMODPATH=$(KMODPATH); /sbin/depmod -ae $(KERNELRELEASE))
@@ -114,12 +114,21 @@ reinstall-tools: uninstall-tools install
reinstall-modules: uninstall-modules install-modules
clean:
- for i in $(obj-y); do \
- $(MAKE) -C $$i clean; \
- done
- -$(MAKE) -C $(TOOLS) clean
- rm -rf .tmp_versions
+ -find $(obj-y) -name '*~' \
+ -or -name '*.o' \
+ -or -name '*.o.d' \
+ -or -name '*.o.cmd' \
+ -or -name '*.o.flags' \
+ -or -name '*.ko' \
+ -or -name '*.ko.cmd' \
+ -or -name '*.mod.c' \
+ -or -name '.depend' \
+ -or -name '.version' \
+ -or -name '.symvers' | \
+ xargs -r rm -f
rm -f *.symvers svnversion.h
+ rm -rf .tmp_versions
+ make -C tools clean
info:
@echo "The following settings will be used for compilation:"
@@ -135,18 +144,6 @@ info:
@echo "KMODPATH : $(KMODPATH)"
@echo "KMODSUF : $(KMODSUF)"
-sanitycheck:
- @echo -n "Checking requirements... "
-
- @# check if specified rate control is available
- @if [ ! -d $(ATH_RATE) ]; then \
- echo "FAILED"; \
- echo "Selected rate control $(ATH_RATE) not available."; \
- exit 1; \
- fi
-
- @echo "ok."
-
.PHONY: release
release:
sh scripts/make-release.bash
@@ -155,7 +152,7 @@ release:
unload:
bash scripts/madwifi-unload
-configcheck: sanitycheck
+configcheck:
@echo -n "Checking kernel configuration... "
@# check version of kernel
--- a/Makefile.inc
+++ b/Makefile.inc
@@ -68,6 +68,9 @@ endif
export KERNELPATH
endif
+# build net80211 and ath_ahb/ath_pci into a single module
+export SINGLE_MODULE=1
+
# KERNELRELEASE is the target kernel's version. It's always taken from
# the kernel build tree. Kernel Makefile doesn't always know the exact
# kernel version (especially for vendor stock kernels), so we get it
@@ -100,6 +103,7 @@ export ARCH
include $(TOP)/ath_hal/ah_target.inc
export TARGET
COPTS += -DTARGET='"$(TARGET)"'
+COPTS += -DCONFIG_ATHEROS_RATE_DEFAULT='"$(firstword $(ATH_RATE))"'
# KMODPATH nominates the directory where the modules will be
# installed to
@@ -141,7 +145,7 @@ ATH= $(TOP)/ath
#
# Path to the rate control algorithms.
#
-ATH_RATE= $(TOP)/ath_rate
+ATH_RATE= minstrel
#
# Path to the userspace utilities.
#
--- a/ath_rate/sample/sample.c
+++ b/ath_rate/sample/sample.c
@@ -991,6 +991,8 @@ static struct ieee80211_rate_ops ath_rat
.dynamic_proc_register = ath_rate_dynamic_proc_register,
};
+#include <net80211/module.h>
+
MODULE_AUTHOR("John Bicket");
MODULE_DESCRIPTION("SampleRate bit-rate selection algorithm for Atheros devices");
#ifdef MODULE_VERSION
@@ -1000,18 +1002,17 @@ MODULE_VERSION(RELEASE_VERSION);
MODULE_LICENSE("Dual BSD/GPL");
#endif
-static int __init
-init_ath_rate_sample(void)
+static int __init ath_rate_sample_init(void)
{
printk(KERN_INFO "%s: %s\n", dev_info, version);
return ieee80211_rate_register(&ath_rate_ops);
}
-module_init(init_ath_rate_sample);
+module_init(ath_rate_sample_init);
static void __exit
-exit_ath_rate_sample(void)
+ath_rate_sample_exit(void)
{
ieee80211_rate_unregister(&ath_rate_ops);
printk(KERN_INFO "%s: unloaded\n", dev_info);
}
-module_exit(exit_ath_rate_sample);
+module_exit(ath_rate_sample_exit);
--- a/net80211/if_media.h
+++ b/net80211/if_media.h
@@ -42,6 +42,7 @@
#define _NET_IF_MEDIA_H_
#include <net80211/ieee80211_linux.h>
+#include "symbol.h"
/*
* Prototypes and definitions for BSD/OS-compatible network interface
--- /dev/null
+++ b/net80211/symbol.h
@@ -0,0 +1,4 @@
+#ifdef SINGLE_MODULE
+#undef EXPORT_SYMBOL
+#define EXPORT_SYMBOL(...)
+#endif
--- a/ath_rate/Makefile
+++ b/ath_rate/Makefile
@@ -1,7 +1,7 @@
obj := $(firstword $(obj) $(SUBDIRS) .)
TOP = $(obj)/..
-obj-y := amrr/ onoe/ sample/ minstrel/
+obj-y := sample/ minstrel/
include $(TOP)/Makefile.inc