ath79: add support for MikroTik RouterBOARD LHG 2nD
The MikroTik RouterBOARD LHG 2nD (sold as LHG 2) is a 2.4 GHz 802.11b/g/n outdoor device with a feed and an integrated dual polarization grid dish antenna based on the LHG-HB platform. See https://mikrotik.com/product/lhg_2 for more info. Specifications: - SoC: Qualcomm Atheros QCA9533 - RAM: 64 MB - Storage: 16 MB NOR - Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 18 dBi antenna - Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 12-28 Vdc PoE in - 8 user-controllable LEDs: · 1x power (blue) · 1x user (green) · 1x lan (green) · 1x wlan (green) · 4x rssi (green) Note: The rssihigh LED is disabled, as it shares GPIO 16 with the reset button. Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> [rebase, remove rssiled setup, adjust commit message, add DTSIs] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Roger Pueyo Centelles
Adrian Schmutzler
parent
ed19ba04e8
commit
7a705c067f
87
target/linux/ath79/dts/qca9533_mikrotik_routerboard-16m.dtsi
Normal file
87
target/linux/ath79/dts/qca9533_mikrotik_routerboard-16m.dtsi
Normal file
|
|
@ -0,0 +1,87 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca953x.dtsi"
|
||||
|
||||
/ {
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "RouterBoot";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
compatible = "mikrotik,routerboot-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "bootloader1";
|
||||
reg = <0x0 0x0>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
hard_config: hard_config {
|
||||
read-only;
|
||||
};
|
||||
|
||||
bios {
|
||||
size = <0x1000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@10000 {
|
||||
label = "bootloader2";
|
||||
reg = <0x10000 0x0>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
soft_config {
|
||||
label = "soft_config";
|
||||
};
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
compatible = "mikrotik,minor";
|
||||
label = "firmware";
|
||||
reg = <0x020000 0xfe0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
qca,no-eeprom;
|
||||
};
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "qca9533_mikrotik_routerboard-lhg-hb.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "mikrotik,routerboard-lhg-2nd", "qca,qca9533";
|
||||
model = "MikroTik RouterBOARD LHG 2nD";
|
||||
};
|
||||
|
|
@ -0,0 +1,88 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca9533_mikrotik_routerboard-16m.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "mikrotik,routerboard-lhg-hb", "qca,qca9533";
|
||||
model = "MikroTik RouterBOARD LHG-HB platform";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_user;
|
||||
led-failsafe = &led_user;
|
||||
led-upgrade = &led_user;
|
||||
led-running = &led_user;
|
||||
serial0 = &uart;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_wan_pin>;
|
||||
|
||||
power {
|
||||
label = "mikrotik:blue:power";
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led_user: user {
|
||||
label = "mikrotik:green:user";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "mikrotik:green:lan";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "mikrotik:green:wlan";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
rssilow {
|
||||
label = "mikrotik:green:rssilow";
|
||||
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rssimediumlow {
|
||||
label = "mikrotik:green:rssimediumlow";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rssimediumhigh {
|
||||
label = "mikrotik:green:rssimediumhigh";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* The rssihigh LED GPIO 16 is shared with the reset button, so it remains
|
||||
unregistered here to avoid conflict.
|
||||
|
||||
rssihigh {
|
||||
label = "mikrotik:green:rssihigh";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
*/
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
compatible = "syscon", "simple-mfd";
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&swphy0>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinmux {
|
||||
led_wan_pin: pinmux_led_wan_pin {
|
||||
pinctrl-single,bits = <0x4 0x0 0xff>;
|
||||
};
|
||||
};
|
||||
|
|
@ -18,6 +18,14 @@ define Device/mikrotik_routerboard-922uags-5hpacd
|
|||
endef
|
||||
TARGET_DEVICES += mikrotik_routerboard-922uags-5hpacd
|
||||
|
||||
define Device/mikrotik_routerboard-lhg-2nd
|
||||
$(Device/mikrotik_nor)
|
||||
SOC := qca9533
|
||||
DEVICE_MODEL := RouterBOARD LHG 2nD (LHG 2)
|
||||
IMAGE_SIZE := 16256k
|
||||
endef
|
||||
TARGET_DEVICES += mikrotik_routerboard-lhg-2nd
|
||||
|
||||
define Device/mikrotik_routerboard-wap-g-5hact2hnd
|
||||
$(Device/mikrotik_nor)
|
||||
SOC := qca9556
|
||||
|
|
|
|||
18
target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
Executable file
18
target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds
Executable file
|
|
@ -0,0 +1,18 @@
|
|||
#!/bin/sh
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
board=$(board_name)
|
||||
boardname="${board##*,}"
|
||||
|
||||
case "$board" in
|
||||
mikrotik,routerboard-lhg-2nd)
|
||||
ucidef_set_led_netdev "lan" "lan" "mikrotik:green:lan" "eth0"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
|
|
@ -16,6 +16,7 @@ ath79_setup_interfaces()
|
|||
"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
|
||||
;;
|
||||
mikrotik,routerboard-922uags-5hpacd|\
|
||||
mikrotik,routerboard-lhg-2nd|\
|
||||
mikrotik,routerboard-wap-g-5hact2hnd)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
|
|
@ -34,6 +35,7 @@ ath79_setup_macs()
|
|||
local mac_base="$(cat /sys/firmware/mikrotik/hard_config/mac_base)"
|
||||
|
||||
case "$board" in
|
||||
mikrotik,routerboard-lhg-2nd|\
|
||||
mikrotik,routerboard-wap-g-5hact2hnd)
|
||||
label_mac="$mac_base"
|
||||
lan_mac="$mac_base"
|
||||
|
|
|
|||
|
|
@ -12,6 +12,12 @@ board=$(board_name)
|
|||
case "$FIRMWARE" in
|
||||
"ath9k-eeprom-ahb-18100000.wmac.bin")
|
||||
case $board in
|
||||
mikrotik,routerboard-lhg-2nd)
|
||||
caldata_from_file $wlan_data 0x1000 0x440 /tmp/$FIRMWARE
|
||||
ath9k_patch_mac $(macaddr_add "$mac_base" +1) /tmp/$FIRMWARE
|
||||
caldata_sysfsload_from_file /tmp/$FIRMWARE 0x0 0x440
|
||||
rm -f /tmp/$FIRMWARE
|
||||
;;
|
||||
mikrotik,routerboard-wap-g-5hact2hnd)
|
||||
caldata_from_file $wlan_data 0x1000 0x440 /tmp/$FIRMWARE
|
||||
ath9k_patch_mac $(macaddr_add "$mac_base" +2) /tmp/$FIRMWARE
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user