ramips: Add Alpha ASL-26555 support.

This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36433
This commit is contained in:
John Crispin 2013-04-25 19:02:53 +00:00
parent c7216d0cab
commit 7bfab6e308
11 changed files with 328 additions and 0 deletions

View File

@ -15,6 +15,9 @@ get_status_led() {
argus-atp52b)
status_led="argus-atp52b:green:run"
;;
asl26555)
status_led="asl26555:green:power"
;;
br6524n)
status_led="edimax:blue:power"
;;

View File

@ -30,6 +30,7 @@ board=$(ramips_board_name)
case "$FIRMWARE" in
"soc_wmac.eeprom")
case $board in
asl26555 | \
dir-300-b1 | \
dir-600-b1 | \
dir-600-b2 | \

View File

@ -35,6 +35,12 @@ case $board in
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
set_wifi_led "rt2800pci-phy0::radio"
;;
asl26555)
ucidef_set_led_default "power" "POWER" "asl26555:green:power" "1"
ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
set_wifi_led "asl26555:green:wlan"
set_usb_led "asl26555:green:3g"
;;
bc2)
set_usb_led "bc2:blue:usb"
;;

View File

@ -63,6 +63,12 @@ ramips_setup_interfaces()
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
asl26555)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
;;
dir-645)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
@ -176,6 +182,10 @@ ramips_setup_macs()
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
asl26555)
lan_mac=$(mtd_get_mac_binary devdata 16388)
;;
w306r-v20)
lan_mac=$(mtd_get_mac_binary factory 4)
wan_mac=$(macaddr_add "$lan_mac" 5)

View File

@ -34,6 +34,7 @@ preinit_set_mac_address() {
mac=$(macaddr_setbit_la "$mac")
ifconfig eth0 hw ether $mac 2>/dev/null
;;
asl26555 |\
dir-300-b1 |\
dir-300-b2 |\
dir-600-b1)

View File

@ -66,6 +66,9 @@ ramips_board_detect() {
*"Asus WL-330N3G")
name="wl-330n3g"
;;
*"Alpha ASL26555")
name="asl26555"
;;
*"Aztech HW550-3G")
name="hw550-3g"
;;

View File

@ -22,6 +22,7 @@ platform_check_image() {
all0239-3g | \
all0256n | \
all5002 | \
asl26555 | \
bc2 | \
broadway | \
carambola | \

View File

@ -0,0 +1,138 @@
/dts-v1/;
/include/ "rt3050.dtsi"
/ {
compatible = "ASL26555", "ralink,rt3050-soc";
model = "Alpha ASL26555";
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "spi", "mdio", "uartlite", "sdram", "rgmii";
ralink,gpiomux = "i2c", "jtag";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "s25sl12801";
reg = <0 0>;
linux,modalias = "m25p80", "s25sl12801";
spi-max-frequency = <10000000>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xf80000>;
};
partition@fd0000 {
label = "cert";
reg = <0xfd0000 0x10000>;
read-only;
};
partition@fe0000 {
label = "langpack";
reg = <0xfe0000 0x10000>;
read-only;
};
partition@ff0000 {
label = "devdata";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x1e>;
};
wmac@10180000 {
status = "okay";
};
otg@101c0000 {
status = "okay";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 0>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 12 0>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
eth {
label = "asl26555:green:eth";
gpios = <&gpio0 0 1>;
};
wan-red {
label = "asl26555:red:wan";
gpios = <&gpio0 1 0>;
};
wan-green {
label = "asl26555:green:wan";
gpios = <&gpio0 2 0>;
};
wlan {
label = "asl26555:green:wlan";
gpios = <&gpio0 7 0>;
};
power-green {
label = "asl26555:green:power";
gpios = <&gpio0 8 0>;
};
power-red {
label = "asl26555:red:power";
gpios = <&gpio0 9 0>;
};
3g-green {
label = "asl26555:green:3g";
gpios = <&gpio0 14 1>;
};
3g-red {
label = "asl26555:red:3g";
gpios = <&gpio0 17 1>;
};
};
};

View File

@ -0,0 +1,133 @@
/dts-v1/;
/include/ "rt3050.dtsi"
/ {
compatible = "ASL26555", "ralink,rt3050-soc";
model = "Alpha ASL26555";
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "spi", "mdio", "uartlite", "sdram", "rgmii";
ralink,gpiomux = "i2c", "jtag";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "s25sl064p";
reg = <0 0>;
linux,modalias = "m25p80", "s25sl064p";
spi-max-frequency = <10000000>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "devdata";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "rgdb";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x790000>;
};
partition@7e0000 {
label = "cert";
reg = <0x7e0000 0x10000>;
read-only;
};
partition@7f0000 {
label = "langpack";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x1e>;
};
wmac@10180000 {
status = "okay";
};
otg@101c0000 {
status = "okay";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 0>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 12 0>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
eth {
label = "asl26555:green:eth";
gpios = <&gpio0 0 1>;
};
wan-red {
label = "asl26555:red:wan";
gpios = <&gpio0 1 0>;
};
wan-green {
label = "asl26555:green:wan";
gpios = <&gpio0 2 0>;
};
wlan {
label = "asl26555:green:wlan";
gpios = <&gpio0 7 0>;
};
power-green {
label = "asl26555:green:power";
gpios = <&gpio0 8 0>;
};
power-red {
label = "asl26555:red:power";
gpios = <&gpio0 9 0>;
};
3g-green {
label = "asl26555:green:3g";
gpios = <&gpio0 14 1>;
};
3g-red {
label = "asl26555:red:3g";
gpios = <&gpio0 17 1>;
};
};
};

View File

@ -269,6 +269,18 @@ Image/Build/Profile/ALL5002=$(call BuildFirmware/CustomFlash/$(1),$(1),all5002,A
argus_atp52b_mtd_size=7995392
Image/Build/Profile/ARGUS_ATP52B=$(call BuildFirmware/CustomFlash/$(1),$(1),argus_atp52b,ARGUS_ATP52B,$(argus_atp52b_mtd_size))
asl26555_8mb_mtd_size=7929856
asl26555_16mb_mtd_size=16252928
define BuildFirmware/ASL26555/squashfs
$(call BuildFirmware/CustomFlash/$(1),$(1),$(2)-8M,$(3)-8M,$(asl26555_8mb_mtd_size))
$(call BuildFirmware/CustomFlash/$(1),$(1),$(2)-16M,$(3)-16M,$(asl26555_16mb_mtd_size))
endef
define BuildFirmware/ASL26555/initramfs
$(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
$(call BuildFirmware/OF/initramfs,$(1),$(2)-16M,$(3)-16M)
endef
Image/Build/Profile/ASL26555=$(call BuildFirmware/ASL26555/$(1),$(1),asl26555,ASL26555)
Image/Build/Profile/BC2=$(call BuildFirmware/Default8M/$(1),$(1),bc2,BC2)
broadway_mtd_size=7929856
@ -425,6 +437,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/ALL0256N,$(1))
$(call Image/Build/Profile/ALL5002,$(1))
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
$(call Image/Build/Profile/ASL26555,$(1))
$(call Image/Build/Profile/BC2,$(1))
$(call Image/Build/Profile/BROADWAY,$(1))
$(call Image/Build/Profile/CARAMBOLA,$(1))

View File

@ -0,0 +1,19 @@
#
# Copyright (C) 2013 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/ASL26555
NAME:=Alpha ASL26555
PACKAGES:=\
kmod-usb-core kmod-usb-rt305x-dwc_otg \
kmod-ledtrig-usbdev
endef
define Profile/ASL26555/Description
Package set for Alpha ASL26555
endef
$(eval $(call Profile,ASL26555))