add support for 2.6.36 kernel

SVN-Revision: 23760
This commit is contained in:
Florian Fainelli 2010-11-01 13:09:34 +00:00
parent cbf63d4c93
commit 90165562aa
5 changed files with 1587 additions and 0 deletions

View File

@ -0,0 +1,215 @@
CONFIG_AEABI=y
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_ARCH_CNS3XXX is not set
CONFIG_ARCH_EP93XX=y
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_NUC93X is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_S5P6440 is not set
# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_S5PV310 is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ARCH_TEGRA is not set
CONFIG_ARCH_USES_GETTIMEOFFSET=y
# CONFIG_ARCH_VEXPRESS is not set
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_SP805_WATCHDOG is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
# CONFIG_ARPD is not set
# CONFIG_AUTO_ZRELADDR is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CMDLINE="console=ttyAM0,57600 init=/etc/preinit"
CONFIG_COMMON_CLKDEV=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_ARM920T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CRC7=y
CONFIG_CRC_ITU_T=y
CONFIG_CRUNCH=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_USER=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_DNOTIFY=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_ELF_CORE=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_EP93XX_EARLY_UART1=y
# CONFIG_EP93XX_EARLY_UART2 is not set
# CONFIG_EP93XX_EARLY_UART3 is not set
CONFIG_EP93XX_ETH=y
CONFIG_EP93XX_SDCE0_PHYS_OFFSET=y
# CONFIG_EP93XX_SDCE1_PHYS_OFFSET is not set
# CONFIG_EP93XX_SDCE2_PHYS_OFFSET is not set
# CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET is not set
# CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET is not set
CONFIG_EP93XX_WATCHDOG=y
CONFIG_FB=y
# CONFIG_FB_ARMCLCD is not set
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_EP93XX=y
# CONFIG_FB_SM7XX is not set
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FONTS=y
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
CONFIG_FONT_8x16=y
CONFIG_FONT_8x8=y
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_SUN8x16 is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_FPE_FASTFPE is not set
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FW_LOADER is not set
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_PL061 is not set
# CONFIG_HAMRADIO is not set
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_AOUT=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HW_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INOTIFY_USER=y
CONFIG_INPUT=y
# CONFIG_INPUT_MISC is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_LEDS_GPIO is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_MACH_EDB9302A is not set
# CONFIG_MACH_EDB9307A is not set
# CONFIG_MACH_EDB9315A is not set
CONFIG_MACH_SIM_ONE=y
# CONFIG_MACH_SNAPPER_CL15 is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_SPI=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_CFI_STAA=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_RAM=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_OABI_COMPAT=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PCI_SYSCALL is not set
CONFIG_PERF_USE_VMALLOC=y
# CONFIG_PLAT_SPEAR is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SDIO_UART is not set
# CONFIG_SERIAL_8250 is not set
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
# CONFIG_SERIAL_AMBA_PL011 is not set
# CONFIG_SPARSE_IRQ is not set
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_EP93XX=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_PL022 is not set
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_EP93XX=y
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_UID16=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB_SUPPORT=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZONE_DMA_FLAG=0

View File

@ -0,0 +1,59 @@
This patch puts the EP93xx chip revision and unique ID into /proc/cpuinfo.
This is necessary to be able to set a unique MAC address for DHCP purposes
by adding a line to /etc/network/interfaces:
# Generate a unique locally-assigned MAC address from the CPU serial number
pre-up ifconfig eth0 hw ether `sed -n 's/^Serial.* 000000/02/p' /proc/cpuinfo`
It uses the chip revision reading code in the ep93xx-chip-revision patch.
Really, this is wrong, since /proc/cpuinfo should report the revision and
serial number of the ARM920T processor, while these are the rev and serial
of the EP93xx SoC. In a future kernel (>2.6.34) there may be a new file
/proc/socinfo for this information.
-martinwguy 14 May 2010
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -47,6 +47,12 @@
#include <asm/traps.h>
#include <asm/unwind.h>
+#if defined(CONFIG_ARCH_EP93XX)
+#include <mach/io.h>
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
+#endif
+
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
#include "compat.h"
#endif
@@ -953,9 +959,16 @@ static int c_show(struct seq_file *m, vo
seq_puts(m, "\n");
seq_printf(m, "Hardware\t: %s\n", machine_name);
+#if defined(CONFIG_ARCH_EP93XX)
+ seq_printf(m, "Revision\t: %04x\n",
+ ep93xx_chip_revision());
+ seq_printf(m, "Serial\t\t: %016x\n",
+ *((unsigned int *)EP93XX_SECURITY_UNIQID));
+#else
seq_printf(m, "Revision\t: %04x\n", system_rev);
seq_printf(m, "Serial\t\t: %08x%08x\n",
system_serial_high, system_serial_low);
+#endif
return 0;
}
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -97,6 +97,8 @@
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
+#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x))
+#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440)
#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))

View File

@ -0,0 +1,74 @@
This patch makes SDHC cards work with the mmc_spi driver.
The problem is that they fail when reading the last block of the card using
a multi-block read. This is because on SDHC the multiple block read has to be
stopped with an explicit STOP command, which needs to be sent to the card
while the incoming transfer is in progress.
The 2.6.3[45] mmc-spi driver sends it after the last block transfer, so the
SDHC card continues reading past the end of the card.
This patch works around this by using single-block reads if we're reading the
last blocks of the card.
-martinwguy, 14 May 2010
Date: Thu, 29 Apr 2010 21:30:36 +0300
From: Mika Westerberg <mika.westerberg@iki.fi>
To: Martin Guy <martinwguy@gmail.com>
On Wed, Apr 21, 2010 at 02:10:08AM +0100, Martin Guy wrote:
>
> the SDHC cards I have don't work at all, spewing tons of:
> mmcblk0: error -38 sending status comand
> mmcblk0: error -38 sending read/write command, response 0x4, card status 0xff04
> end_request: I/O error, dev mmcblk0, sector 7744509
I bought today a new 4GB SDHC card and with that I get similar
errors that you are getting. I hacked around quick fix which seems
to work in my case. I'm wondering whether you could check if it
helps with your SDHC card as well?
This problem is easy to reproduce, just read last sector of the
card (I wrote simple C program but running fdisk -l does the same).
Patch is below.
Thanks,
MW
From: Mika Westerberg <mika.westerberg@iki.fi>
Date: Thu, 29 Apr 2010 21:14:32 +0300
Subject: [PATCH] mmc_block: use single block reads for last block on SPI
Some SD-cards fail when doing multiblock read for last block with SPI host. Real
reason is not known but as workaround we can perform this last read using
multiple single block reads.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
---
drivers/mmc/card/block.c | 19 +++++++++++++++++++
1 files changed, 19 insertions(+), 0 deletions(-)
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -351,6 +351,22 @@ static int mmc_blk_issue_rw_rq(struct mm
if (brq.data.blocks > card->host->max_blk_count)
brq.data.blocks = card->host->max_blk_count;
+ if (mmc_host_is_spi(card->host)) {
+ /*
+ * Some SD-cards fail when we are reading last block
+ * with multiblock read. In these cases we automatically
+ * use single block reads. This only happens on SPI
+ * hosts.
+ */
+ if (rq_data_dir(req) == READ && brq.data.blocks > 1) {
+ sector_t s = blk_rq_pos(req) + brq.data.blocks;
+
+ if (s >= get_capacity(md->disk)) {
+ disable_multi = 1;
+ }
+ }
+ }
+
/*
* After a read error, we redo the request one sector at a time
* in order to accurately determine which sectors can be read

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,179 @@
This enables the mmc-over-spi driver for the Sim.One board, based on Mika's
patch, which used a GPIO for chip select in stead of the default SFRMOUT pin.
I've modified it to use the usual SFRMOUT; if you've modified your Sim.One
board to use a GPIO instead, uncomment and modify
// #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO15
in the source file.
-martinwguy, 14 May 2010
From: Mika Westerberg <mika.westerberg@iki.fi>
Date: Wed, 28 Apr 2010 08:42:46 +0300
Subject: [PATCH] ep93xx: simone: added board specific SPI support for MMC/SD cards
This includes setting up EGPIOs 0 and 9 for card detection and chip select
respectively.
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -18,12 +18,16 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
#include <mach/fb.h>
+#include <mach/ep93xx_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -38,6 +42,135 @@ static struct ep93xxfb_mach_info __initd
.flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
};
+/*
+ * GPIO lines used for MMC card detection.
+ */
+#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0
+
+/*
+ * If you have hacked your Sim.One to use a GPIO as SD card chip select
+ * (SD pin 1), uncomment the following line.
+ * The example, EGPIO15, is on TP17 near the CPU.
+ */
+// #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO15
+
+/*
+ * MMC SPI chip select GPIO handling. If you are using SFRMOUT (SFRM1) signal,
+ * you can leave these empty and pass NULL as .controller_data.
+ */
+
+#ifdef MMC_CHIP_SELECT_GPIO
+static int simone_mmc_spi_setup(struct spi_device *spi)
+{
+ unsigned int gpio = MMC_CHIP_SELECT_GPIO;
+ int err;
+
+ err = gpio_request(gpio, spi->modalias);
+ if (err)
+ return err;
+
+ err = gpio_direction_output(gpio, 1);
+ if (err) {
+ gpio_free(gpio);
+ return err;
+ }
+
+ return 0;
+}
+
+static void simone_mmc_spi_cleanup(struct spi_device *spi)
+{
+ unsigned int gpio = MMC_CHIP_SELECT_GPIO;
+
+ gpio_set_value(gpio, 1);
+ gpio_direction_input(gpio);
+ gpio_free(gpio);
+}
+
+static void simone_mmc_spi_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(MMC_CHIP_SELECT_GPIO, value);
+}
+
+static struct ep93xx_spi_chip_ops simone_mmc_spi_ops = {
+ .setup = simone_mmc_spi_setup,
+ .cleanup = simone_mmc_spi_cleanup,
+ .cs_control = simone_mmc_spi_cs_control,
+};
+#endif
+
+/*
+ * MMC card detection GPIO setup.
+ */
+static int simone_mmc_spi_init(struct device *dev,
+ irqreturn_t (*irq_handler)(int, void *), void *mmc)
+{
+ unsigned int gpio = MMC_CARD_DETECT_GPIO;
+ int irq, err;
+
+ err = gpio_request(gpio, dev_name(dev));
+ if (err)
+ return err;
+
+ err = gpio_direction_input(gpio);
+ if (err)
+ goto fail;
+
+ irq = gpio_to_irq(gpio);
+ if (irq < 0)
+ goto fail;
+
+ err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING,
+ "MMC card detect", mmc);
+ if (err)
+ goto fail;
+
+ printk(KERN_INFO "%s: using irq %d for MMC card detection\n",
+ dev_name(dev), irq);
+
+ return 0;
+fail:
+ gpio_free(gpio);
+ return err;
+}
+
+static void simone_mmc_spi_exit(struct device *dev, void *mmc)
+{
+ unsigned int gpio = MMC_CARD_DETECT_GPIO;
+
+ free_irq(gpio_to_irq(gpio), mmc);
+ gpio_free(gpio);
+}
+
+static struct mmc_spi_platform_data simone_mmc_spi_data = {
+ .init = simone_mmc_spi_init,
+ .exit = simone_mmc_spi_exit,
+ .detect_delay = 500,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct spi_board_info simone_spi_devices[] __initdata = {
+ {
+ .modalias = "mmc_spi",
+#ifdef MMC_CHIP_SELECT_GPIO
+ .controller_data = &simone_mmc_spi_ops,
+#endif
+ .platform_data = &simone_mmc_spi_data,
+ /*
+ * We use 10 MHz even though the maximum is 3.7 MHz. The driver
+ * will limit it automatically to max. frequency.
+ */
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct ep93xx_spi_info simone_spi_info __initdata = {
+ .num_chipselect = ARRAY_SIZE(simone_spi_devices),
+};
+
static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
.sda_is_open_drain = 0,
@@ -61,6 +194,8 @@ static void __init simone_init_machine(v
ep93xx_register_fb(&simone_fb_info);
ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
ARRAY_SIZE(simone_i2c_board_info));
+ ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
+ ARRAY_SIZE(simone_spi_devices));
}
MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")