183130227/tn3399_openwrt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ath79: add support for Archer C58/C59 v1

Browse Source 
This commit adds support for the Archer C58 v1 and C59 v1, previously
supported in the ar71xx target.

CPU:   Qualcomm QCA9561
RAM:   64M (C58) / 128M (C59)
FLASH: 8M (C58) / 16M (C59)
WiFi:  QCA9561 bgn 3x3:3
       QCA9888 nac 2x2:2
LED:   Power, WiFi 2.4, WiFi 5, WAN green, WAN amber, LAN, WPS
       Only C59: USB
BTN:   WPS, WiFi, Reset

Installation
------------

Via Web-UI:
Update factory image via Web-UI.

Via TFTP:
Rename factory image to "tp_recovery.bin" and place it in the root-dir
of your tftp server. Configure to listen on 192.168.0.66. Power up the
router while holding down the reset-button. The router will flash itself
and reboot.

Note: For TFTP, you might need a switch between router and computer, as
link establishment might take to long.

Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer 2018-10-31 20:19:49 +01:00 committed by John Crispin
parent 89eb1a6d72
commit 946ffe470d
9 changed files with 441 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
target/linux/ath79/base-files/etc/board.d/01_leds
View File

@ -52,6 +52,11 @@ pcs,cr3000)
ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02"
;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
;;
tplink,re450-v2)
ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"

4
target/linux/ath79/base-files/etc/board.d/02_network
View File

@ -32,7 +32,9 @@ ath79_setup_interfaces()
wd,mynet-wifi-rangeextender)
ucidef_set_interface_lan "eth0"
;;
avm,fritz4020)
avm,fritz4020|\
tplink,archer-c58-v1|\
tplink,archer-c59-v1)
ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"

6
target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -131,6 +131,12 @@ case "$FIRMWARE" in
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1)
ath10kcal_extract "art" 20480 12064
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
esac
;;
*)

4
target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
View File

@ -18,6 +18,10 @@ case "$board" in
[ "$PHYNBR" -eq 1 ] && \
echo $(k2t_get_mac "lan_mac") > /sys${DEVPATH}/macaddress
;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1)
echo $(macaddr_add $(mtd_get_mac_binary mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
;;
*)
;;
esac

130
target/linux/ath79/dts/qca9561_tplink_archer-c58-v1.dts Normal file
View File

@ -0,0 +1,130 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9561_tplink_archer-c5x.dtsi"
/ {
compatible = "tplink,archer-c58-v1", "qca,qca9560";
model = "TP-LINK Archer C58 v1";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
leds {
compatible = "gpio-leds";
power: power {
label = "tp-link:green:power";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "tp-link:green:wlan2g";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
default-state = "off";
};
wlan5g {
label = "tp-link:green:wlan5g";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
default-state = "off";
};
wan_green {
label = "tp-link:green:wan";
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan_amber {
label = "tp-link:amber:wan";
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan {
label = "tp-link:green:lan";
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wps {
label = "tp-link:green:wps";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x010000>;
read-only;
};
mac: partition@10000 {
label = "mac";
reg = <0x010000 0x010000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x7c0000>;
};
partition@7e0000 {
label = "tplink";
reg = <0x7e0000 0x010000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&mac 0x8>;
mtd-mac-address-increment = <1>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&mac 0x8>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&mac 0x8>;
};

153
target/linux/ath79/dts/qca9561_tplink_archer-c59-v1.dts Normal file
View File

@ -0,0 +1,153 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9561_tplink_archer-c5x.dtsi"
/ {
compatible = "tplink,archer-c59-v1", "qca,qca9560";
model = "TP-LINK Archer C59 v1";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
leds {
compatible = "gpio-leds";
power: power {
label = "tp-link:green:power";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "tp-link:green:wlan2g";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
default-state = "off";
};
wlan5g {
label = "tp-link:green:wlan5g";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
default-state = "off";
};
wan_green {
label = "tp-link:green:wan";
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan_amber {
label = "tp-link:amber:wan";
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan {
label = "tp-link:green:lan";
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wps {
label = "tp-link:green:wps";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
usb {
label = "tp-link:green:usb";
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "usbport";
trigger-sources = <&hub_port>;
};
};
};
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy0 {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x010000>;
read-only;
};
mac: partition@10000 {
label = "mac";
reg = <0x010000 0x010000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0xe30000>;
};
partition@e50000 {
label = "tplink";
reg = <0xe50000 0x1a0000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&mac 0x8>;
mtd-mac-address-increment = <1>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&mac 0x8>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&mac 0x8>;
};

98
target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi Normal file
View File

@ -0,0 +1,98 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
compatible = "tplink,archer-c5x", "qca,qca9560";
chosen {
bootargs = "console=ttyS0,115200n8";
};
led_spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpio-sck = <&gpio 18 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio 17 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
led_gpio: led_gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
spi-max-frequency = <10000000>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
wps_button {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
wifi_button {
label = "WiFi button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
reset_button {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
gpio-export {
compatible = "gpio-export";
gpio_shift_register_oe {
gpio-export,name = "tp-link:oe:sr";
gpio-export,output = <0>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
gpio_shift_register_reset {
gpio-export,name = "tp-link:reset:sr";
gpio-export,output = <1>;
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&pcie {
status = "okay";
};
&eth0 {
phy-mode = "mii";
phy-handle = <&swphy0>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <1>;
switch-phy-swap = <1>;
};
};

20
target/linux/ath79/image/common-tp-link.mk
View File

@ -39,6 +39,14 @@ define Build/mktplinkfw-combined
@mv $@.new $@
endef
define Build/uImageArcher
mkimage -A $(LINUX_KARCH) \
-O linux -T kernel \
-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-n '$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $@ $@.new
@mv $@.new $@
endef
define Device/tplink
TPLINK_HWREV := 0x1
TPLINK_HEADER_VERSION := 1
@ -88,3 +96,15 @@ define Device/tplink-16mlzma
TPLINK_FLASHLAYOUT := 16Mlzma
IMAGE_SIZE := 15872k
endef
define Device/tplink-safeloader
$(Device/tplink)
KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
define Device/tplink-safeloader-uimage
$(Device/tplink-safeloader)
KERNEL := kernel-bin | append-dtb | lzma | uImageArcher lzma
endef

22
target/linux/ath79/image/generic-tp-link.mk
View File

@ -1,5 +1,27 @@
include ./common-tp-link.mk
define Device/tplink_archer-c58-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
IMAGE_SIZE := 7936k
DEVICE_TITLE := TP-LINK Archer C58 v1
TPLINK_BOARD_ID := ARCHER-C58-V1
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
SUPPORTED_DEVICES += archer-c58-v1
endef
TARGET_DEVICES += tplink_archer-c58-v1
define Device/tplink_archer-c59-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
IMAGE_SIZE := 14528k
DEVICE_TITLE := TP-LINK Archer C59 v1
TPLINK_BOARD_ID := ARCHER-C59-V1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca9888-ct
SUPPORTED_DEVICES += archer-c59-v1
endef
TARGET_DEVICES += tplink_archer-c59-v1
define Device/tplink_archer-c7-v1
$(Device/tplink-8mlzma)
ATH_SOC := qca9558