183130227/tn3399_openwrt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ath79: add support for Qxwlan E558 v2

Browse Source 
Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327.

Specification:

 - 720/600/200 MHz (CPU/DDR/AHB)
 - 128 MB of RAM (DDR2)
 - 8/16 MB of FLASH (SPI NOR)
 - 2T2R 2.4 GHz (QCA9558)
 - 3x 10/100/1000 Mbps Ethernet (one port with PoE support)
 - 4x miniPCIe slot (USB 2.0 bus only)
 - 1x microSIM slot
 - 5x LED (4 driven by GPIO)
 - 1x button (reset)
 - 1x 3-pos switch
 - 1x DC jack for main power input (9-48 V)
 - UART (JP5) and LEDs (J8) headers on PCB

Flash instruction:

   1.Using tftp mode with UART connection and original LEDE image
      - Configure PC with static IP 192.168.1.10 and tftp server.
      - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
        to "firmware.bin" and place it in tftp server directory.
      - Connect PC with one of LAN ports, power up the router and press
        key "Enter" to access U-Boot CLI.
      - Use the following commands to update the device to LEDE:
        run lfw
      - After that the device will reboot and boot to LEDE.
      - Wait until all LEDs stops flashing and use the router.

   2.Using httpd mode with Web UI connection and original LEDE image
      - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
      - Connect PC with one of LAN ports,press the reset button, power up
        the router and keep button pressed for around 6-7 seconds, until
        leds flashing.
      - Open your browser and enter 192.168.1.1,You will see the upgrade
        interface, select "openwrt-ar71xx-generic-xxx-squashfs-
        sysupgrade.bin" and click the upgrade button.
      - After that the device will reboot and boot to LEDE.
      - Wait until all LEDs stops flashing and use the router.

Signed-off-by: 张鹏 <sd20@qxwlan.com>
[cut out of bigger patch, keep swconfig, whitespace adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
张鹏 2020-10-16 12:42:15 +02:00 committed by Adrian Schmutzler
parent 27a7d071c0
commit 987d9028e1
5 changed files with 230 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
target/linux/ath79/dts/qca9558_qxwlan_e558-v2-16m.dts Normal file
View File

@ -0,0 +1,16 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9558_qxwlan_e558.dtsi"
/ {
model = "Qxwlan E558 v2 16M";
compatible = "qxwlan,e558-v2-16m", "qca,qca9558";
};
&partitions {
partition@70000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x070000 0xf90000>;
};
};

16
target/linux/ath79/dts/qca9558_qxwlan_e558-v2-8m.dts Normal file
View File

@ -0,0 +1,16 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9558_qxwlan_e558.dtsi"
/ {
model = "Qxwlan E558 v2 8M";
compatible = "qxwlan,e558-v2-8m", "qca,qca9558";
};
&partitions {
partition@70000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x070000 0x790000>;
};
};

172
target/linux/ath79/dts/qca9558_qxwlan_e558.dtsi Normal file
View File

@ -0,0 +1,172 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
label-mac-device = &eth0;
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
wlan {
label = "green:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_system: system {
label = "green:system";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
sig1 {
label = "green:sig1";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
sig2 {
label = "green:sig2";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
pridata: partition@50000 {
label = "pri-data";
reg = <0x050000 0x010000>;
read-only;
};
art: partition@60000 {
label = "art";
reg = <0x060000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
0x10 0x81000080 /* POWER_ON_STRAP */
0x50 0xcc35cc35 /* LED_CTRL0 */
0x54 0xca35ca35 /* LED_CTRL1 */
0x58 0xc935c935 /* LED_CTRL2 */
0x5c 0x03ffff00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6 STATUS */
>;
};
};
&eth0 {
status = "okay";
pll-data = <0x56000000 0x00000101 0x00001616>;
phy-handle = <&phy0>;
mtd-mac-address = <&pridata 0x400>;
mtd-mac-address-increment = <1>;
};
&eth1 {
status = "okay";
pll-data = <0x03000101 0x00000101 0x00001616>;
mtd-mac-address = <&pridata 0x400>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&uart {
status = "okay";
};
&usb_phy0 {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb_phy1 {
status = "okay";
};
&usb1 {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
};

5
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -285,6 +285,11 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan"
;;
qxwlan,e558-v2-8m|\
qxwlan,e558-v2-16m)
ucidef_add_switch "switch0" \
"0@eth1" "4:lan" "5:lan" "6@eth0" "3:wan"
;;
rosinson,wr818)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:wan"

21
target/linux/ath79/image/generic.mk
View File

@ -1475,6 +1475,27 @@ define Device/qihoo_c301
endef
TARGET_DEVICES += qihoo_c301
define Device/qxwlan_e558-v2
SOC := qca9558
DEVICE_VENDOR := Qxwlan
DEVICE_MODEL := E558
DEVICE_PACKAGES := kmod-usb2
endef
define Device/qxwlan_e558-v2-16m
$(Device/qxwlan_e558-v2)
DEVICE_VARIANT := v2 (16M)
IMAGE_SIZE := 15936k
endef
TARGET_DEVICES += qxwlan_e558-v2-16m
define Device/qxwlan_e558-v2-8m
$(Device/qxwlan_e558-v2)
DEVICE_VARIANT := v2 (8M)
IMAGE_SIZE := 7744k
endef
TARGET_DEVICES += qxwlan_e558-v2-8m
define Device/qxwlan_e750a-v4
SOC := ar9344
DEVICE_VENDOR := Qxwlan