Build modules only if realy needed.

SVN-Revision: 17267
This commit is contained in:
Hauke Mehrtens 2009-08-15 08:36:33 +00:00
parent babf8f5927
commit b1ae2c2c20
3 changed files with 95 additions and 20 deletions

View File

@ -456,6 +456,26 @@ MAKE_OPTS:= \
$(if $(CONFIG_HW_RANDOM),CONFIG_B43LEGACY_HWRNG=y,CONFIG_B43LEGACY_HWRNG=n) \
$(if $(CONFIG_PACKAGE_kmod-b43),CONFIG_B43=m) \
$(if $(CONFIG_PACKAGE_kmod-b43legacy),CONFIG_B43LEGACY=m) \
$(if $(CONFIG_PACKAGE_kmod-ath),CONFIG_ATH_COMMON=m) \
$(if $(CONFIG_PACKAGE_kmod-ath5k),CONFIG_ATH5K=m) \
$(if $(CONFIG_PACKAGE_kmod-ath9k),CONFIG_ATH9K=m) \
$(if $(CONFIG_PACKAGE_kmod-zd1211rw),CONFIG_ZD1211RW=m) \
$(if $(CONFIG_PACKAGE_kmod-p54-common),CONFIG_P54_COMMON=m) \
$(if $(CONFIG_PACKAGE_kmod-p54-pci),CONFIG_P54_PCI=m) \
$(if $(CONFIG_PACKAGE_kmod-p54-usb),CONFIG_P54_USB=m) \
$(if $(CONFIG_PACKAGE_kmod-rt2x00-lib),CONFIG_RT2X00=m) \
$(if $(CONFIG_PACKAGE_kmod-rt2x00-pci),CONFIG_RT2X00_LIB_PCI=m) \
$(if $(CONFIG_PACKAGE_kmod-rt2x00-usb),CONFIG_RT2X00_LIB_USB=m) \
$(if $(CONFIG_PACKAGE_kmod-rt2400-pci),CONFIG_RT2400PCI=m) \
$(if $(CONFIG_PACKAGE_kmod-rt2500-pci),CONFIG_RT2500PCI=m) \
$(if $(CONFIG_PACKAGE_kmod-rt2500-usb),CONFIG_RT2500USB=m) \
$(if $(CONFIG_PACKAGE_kmod-rt61-pci),CONFIG_RT61PCI=m) \
$(if $(CONFIG_PACKAGE_kmod-rt73-usb),CONFIG_RT73USB=m) \
$(if $(CONFIG_PACKAGE_kmod-rt2800-pci),CONFIG_RT2800PCI=m) \
$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),CONFIG_RT2800USB=m) \
$(if $(CONFIG_PACKAGE_kmod-rtl8180),CONFIG_RTL8180=m) \
$(if $(CONFIG_PACKAGE_kmod-rtl8187),CONFIG_RTL8187=m) \
$(if $(CONFIG_PACKAGE_kmod-mac80211-hwsim),CONFIG_MAC80211_HWSIM=m) \
KLIB_BUILD="$(LINUX_DIR)" \
MODPROBE=:

View File

@ -1,6 +1,6 @@
--- a/config.mk
+++ b/config.mk
@@ -153,10 +153,10 @@ CONFIG_CFG80211_DEFAULT_PS=y
@@ -153,77 +153,77 @@ CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_CFG80211_REG_DEBUG=y
@ -15,13 +15,21 @@
# CONFIG_LIB80211_DEBUG=y
CONFIG_WIRELESS_OLD_REGULATORY=n
@@ -169,61 +169,61 @@ ifneq ($(CONFIG_PCI),)
CONFIG_ATH5K=m
# mac80211 test driver
-CONFIG_MAC80211_HWSIM=m
+# CONFIG_MAC80211_HWSIM=m
# PCI Drivers
ifneq ($(CONFIG_PCI),)
-CONFIG_ATH5K=m
+# CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG=y
-CONFIG_ATH5K_RFKILL=y
-CONFIG_ATH9K=m
+# CONFIG_ATH5K_RFKILL=y
CONFIG_ATH9K=m
+# CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG=y
@ -112,7 +120,7 @@
# CONFIG_IPW2200_DEBUG=y
# The above enables use a second interface prefixed 'rtap'.
# Example usage:
@@ -238,27 +238,27 @@ CONFIG_IPW2200_QOS=y
@@ -238,46 +238,46 @@ CONFIG_IPW2200_QOS=y
#
# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
@ -134,7 +142,8 @@
+# CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+# CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_P54_PCI=m
-CONFIG_P54_PCI=m
+# CONFIG_P54_PCI=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
@ -145,16 +154,30 @@
+# CONFIG_B44_PCICORE_AUTOSELECT=y
+# CONFIG_B44_PCI=y
CONFIG_RTL8180=m
-CONFIG_RTL8180=m
+# CONFIG_RTL8180=m
-CONFIG_ADM8211=m
-CONFIG_PCMCIA_ATMEL=m
+# CONFIG_ADM8211=m
+# CONFIG_PCMCIA_ATMEL=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2400PCI=m
@@ -274,10 +274,10 @@ CONFIG_RT61PCI=m
-CONFIG_RT2X00_LIB_PCI=m
-CONFIG_RT2400PCI=m
-CONFIG_RT2500PCI=m
-CONFIG_RT2800PCI=m
+# CONFIG_RT2X00_LIB_PCI=m
+# CONFIG_RT2400PCI=m
+# CONFIG_RT2500PCI=m
+# CONFIG_RT2800PCI=m
NEED_RT2X00=y
# Two rt2x00 drivers require firmware: rt61pci and rt73usb. They depend on
# CRC to check the firmware. We check here first for the PCI
# driver as we're in the PCI section.
ifneq ($(CONFIG_CRC_ITU_T),)
-CONFIG_RT61PCI=m
+# CONFIG_RT61PCI=m
NEED_RT2X00_FIRMWARE=y
endif
@ -168,7 +191,7 @@
endif
## end of PCI
@@ -285,18 +285,18 @@ endif
@@ -285,22 +285,22 @@ endif
ifneq ($(CONFIG_PCMCIA),)
ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
@ -192,7 +215,12 @@
# USB Drivers
ifneq ($(CONFIG_USB),)
@@ -310,19 +310,19 @@ CONFIG_ZD1211RW=m
-CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG=y
# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
@@ -310,55 +310,55 @@ CONFIG_ZD1211RW=m
# is only wireless RNDIS chip known to date.
# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
@ -204,8 +232,10 @@
+# CONFIG_USB_NET_CDCETHER=m
CONFIG_P54_USB=m
CONFIG_RTL8187=m
-CONFIG_P54_USB=m
-CONFIG_RTL8187=m
+# CONFIG_P54_USB=m
+# CONFIG_RTL8187=m
-CONFIG_AT76C50X_USB=m
+# CONFIG_AT76C50X_USB=m
@ -218,7 +248,18 @@
endif
# RT2500USB does not require firmware
@@ -337,28 +337,28 @@ NEED_RT2X00_FIRMWARE=y
-CONFIG_RT2500USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2X00_LIB_USB=m
+# CONFIG_RT2500USB=m
+# CONFIG_RT2800USB=m
+# CONFIG_RT2X00_LIB_USB=m
NEED_RT2X00=y
# RT73USB requires firmware
ifneq ($(CONFIG_CRC_ITU_T),)
-CONFIG_RT73USB=m
+# CONFIG_RT73USB=m
NEED_RT2X00_FIRMWARE=y
endif
ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
@ -282,7 +323,13 @@
# CONFIG_IWM_DEBUG=y
endif
@@ -389,7 +389,7 @@ CONFIG_RT2X00_LIB=m
@@ -384,12 +384,12 @@ endif # end of SDIO driver list
# Common rt2x00 requirements
ifeq ($(NEED_RT2X00),y)
-CONFIG_RT2X00=m
+# CONFIG_RT2X00=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_HT=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
@ -291,9 +338,17 @@
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG=y
@@ -406,24 +406,24 @@ CONFIG_P54_LEDS=y
@@ -400,30 +400,30 @@ CONFIG_RT2X00_LIB_FIRMWARE=y
endif
# p54
-CONFIG_P54_COMMON=m
+# CONFIG_P54_COMMON=m
CONFIG_P54_LEDS=y
# Atheros
CONFIG_ATH_COMMON=m
-CONFIG_ATH_COMMON=m
+# CONFIG_ATH_COMMON=m
-CONFIG_WL12XX=y
-CONFIG_WL1251=m

View File

@ -1,9 +1,9 @@
--- a/config.mk
+++ b/config.mk
@@ -171,7 +171,7 @@ CONFIG_ATH5K=m
@@ -171,7 +171,7 @@ ifneq ($(CONFIG_PCI),)
# CONFIG_ATH5K_DEBUG=y
# CONFIG_ATH5K_RFKILL=y
CONFIG_ATH9K=m
# CONFIG_ATH9K=m
-# CONFIG_ATH9K_DEBUG=y
+CONFIG_ATH9K_DEBUG=y