ath79: add support for Belkin F9J1108v2 (AC1750 DB Wi-Fi)
This device is the non-US build of the F9K1115 v2, with a different firmware magic. Specifications: SoC: QCA9558 CPU: 720 MHz Flash: 16 MiB NOR RAM: 128 MiB WiFi 2.4 GHz: QCA9558-AT4A 3x3 MIMO 802.11b/g/n WiFi 5 GHz: QCA9880-2R4E 3x3 MIMO 802.11a/n/ac Ethernet: 4x LAN and 1x WAN (all 1gbps) USB: 1 x USB 2.0 (lower), 1 x USB 3.0 (upper) MAC addresses based on OEM firmware: Interface Address Location --------- ------- -------- lan *:5A sometimes in 0x6 wan *:5B 0x0 2.4Ghz *:5A 0x1002 5Ghz As per mini PCIe EEPROM Flashing instructions: The factory.bin can be flashed via the Belkin web UI or via the uboot http upgrade page. Once the factory.bin has been written, sysupgrade.bin will work as usual. Signed-off-by: Damien Mascord <tusker@tusker.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [wrap commit message/code, adjust label-mac-device, whitespace fixes, merge block in 02_network] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Damien Mascord
Adrian Schmutzler
parent
cb38170f4c
commit
b9971db7c3
229
target/linux/ath79/dts/qca9558_belkin_f9j1108-v2.dts
Normal file
229
target/linux/ath79/dts/qca9558_belkin_f9j1108-v2.dts
Normal file
|
|
@ -0,0 +1,229 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca955x.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Belkin F9J1108 v2 (AC1750 DB Wi-Fi)";
|
||||
compatible = "belkin,f9j1108-v2", "qca,qca9558";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_system;
|
||||
led-failsafe = &led_system;
|
||||
led-running = &led_system;
|
||||
led-upgrade = &led_system;
|
||||
label-mac-device = ð1;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
usb {
|
||||
label = "green:usb2";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
trigger-sources = <&hub_port0>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
|
||||
status {
|
||||
label = "amber:status";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps-amber {
|
||||
label = "amber:wps";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps-blue {
|
||||
label = "blue:wps";
|
||||
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_system: system {
|
||||
label = "blue:system";
|
||||
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
|
||||
usb2_power {
|
||||
gpio-export,name = "usb2:power";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
wps {
|
||||
label = "WPS button";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
virtual_flash {
|
||||
compatible = "mtd-concat";
|
||||
|
||||
devices = <&fwpart1 &fwpart2>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
compatible = "openwrt,okli";
|
||||
label = "firmware";
|
||||
reg = <0x0 0x0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
hub_port0: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <80000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x040000 0x010000>;
|
||||
};
|
||||
|
||||
fwpart1: partition@50000 {
|
||||
label = "fwpart1";
|
||||
reg = <0x050000 0xe20000>;
|
||||
};
|
||||
|
||||
partition@e70000 {
|
||||
label = "loader";
|
||||
reg = <0xe70000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
fwpart2: partition@e80000 {
|
||||
label = "fwpart2";
|
||||
reg = <0xe80000 0x170000>;
|
||||
};
|
||||
|
||||
art: partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x010000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
|
||||
qca,ar8327-initvals = <
|
||||
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
|
||||
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
|
||||
0x50 0xc737c737 /* LED_CTRL0 */
|
||||
0x54 0x00000000 /* LED_CTRL1 */
|
||||
0x58 0x00000000 /* LED_CTRL2 */
|
||||
0x5c 0x0030c300 /* LED_CTRL3 */
|
||||
0x7c 0x0000007e /* PORT0_STATUS */
|
||||
0x94 0x0000007e /* PORT6 STATUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
phy-handle = <&phy0>;
|
||||
pll-data = <0xa6000000 0x00000101 0x00001616>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
rgmii-enabled = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
mtd-mac-address-increment = <(-1)>;
|
||||
pll-data = <0x03000101 0x00000101 0x00001616>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
wifi@0,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
reg = <0 0 0 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
};
|
||||
|
|
@ -100,6 +100,15 @@ ath79_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
|
||||
;;
|
||||
belkin,f9j1108-v2|\
|
||||
tplink,archer-c5-v1|\
|
||||
tplink,archer-c7-v1|\
|
||||
tplink,archer-c7-v2|\
|
||||
tplink,tl-wdr4900-v2|\
|
||||
tplink,tl-wdr7500-v3)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
|
||||
;;
|
||||
buffalo,bhr-4grv|\
|
||||
buffalo,wzr-hp-g450h)
|
||||
ucidef_add_switch "switch0" \
|
||||
|
|
@ -308,14 +317,6 @@ ath79_setup_interfaces()
|
|||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
|
||||
;;
|
||||
tplink,archer-c5-v1|\
|
||||
tplink,archer-c7-v1|\
|
||||
tplink,archer-c7-v2|\
|
||||
tplink,tl-wdr4900-v2|\
|
||||
tplink,tl-wdr7500-v3)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
|
||||
;;
|
||||
tplink,archer-d50-v1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
|
||||
|
|
|
|||
|
|
@ -50,6 +50,24 @@ define Build/cybertan-trx
|
|||
-rm $@-empty.bin
|
||||
endef
|
||||
|
||||
define Build/edimax-headers
|
||||
$(eval edimax_magic=$(word 1,$(1)))
|
||||
$(eval edimax_model=$(word 2,$(1)))
|
||||
|
||||
$(STAGING_DIR_HOST)/bin/edimax_fw_header -M $(edimax_magic) -m $(edimax_model)\
|
||||
-v $(VERSION_DIST)$(firstword $(subst +, , $(firstword $(subst -, ,$(REVISION))))) \
|
||||
-n "uImage" \
|
||||
-i $(KDIR)/loader-$(DEVICE_NAME).uImage \
|
||||
-o $@.uImage
|
||||
$(STAGING_DIR_HOST)/bin/edimax_fw_header -M $(edimax_magic) -m $(edimax_model)\
|
||||
-v $(VERSION_DIST)$(firstword $(subst +, , $(firstword $(subst -, ,$(REVISION))))) \
|
||||
-n "rootfs" \
|
||||
-i $@ \
|
||||
-o $@.rootfs
|
||||
cat $@.uImage $@.rootfs > $@
|
||||
rm -rf $@.uImage $@.rootfs
|
||||
endef
|
||||
|
||||
# This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to
|
||||
# sysupgrade, as otherwise it will implant the old configuration from
|
||||
# OEM firmware when writing rootfs from factory.bin
|
||||
|
|
@ -363,6 +381,27 @@ define Device/avm_fritzdvbc
|
|||
endef
|
||||
TARGET_DEVICES += avm_fritzdvbc
|
||||
|
||||
define Device/belkin_f9j1108-v2
|
||||
SOC := qca9558
|
||||
DEVICE_VENDOR := Belkin
|
||||
DEVICE_MODEL := F9J1108 v2 (AC1750 DB Wi-Fi)
|
||||
IMAGE_SIZE := 14464k
|
||||
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2 \
|
||||
kmod-usb3 kmod-usb-ledtrig-usbport
|
||||
LOADER_TYPE := bin
|
||||
LOADER_FLASH_OFFS := 0x50000
|
||||
COMPILE := loader-$(1).bin loader-$(1).uImage
|
||||
COMPILE/loader-$(1).bin := loader-okli-compile
|
||||
COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | \
|
||||
lzma | uImage lzma
|
||||
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
||||
append-rootfs | pad-rootfs | check-size | \
|
||||
edimax-headers F9J1108v1 BR-6679BAC | pad-to $$$$(BLOCKSIZE)
|
||||
endef
|
||||
TARGET_DEVICES += belkin_f9j1108-v2
|
||||
|
||||
define Device/buffalo_bhr-4grv
|
||||
$(Device/buffalo_common)
|
||||
SOC := ar7242
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user