add uboot-oxnas

This adds support for the oxnas target in U-Boot 2014.04
History can be found at https://github.com/kref/u-boot-oxnas up to 2013.10
changes from 2013.10 to 2014.04 can be followed at
https://gitorious.org/openwrt-oxnas

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43389
This commit is contained in:
John Crispin 2014-11-26 09:00:17 +00:00
parent 72b58f2eb1
commit c05048b0bb
29 changed files with 4262 additions and 0 deletions

View File

@ -0,0 +1,97 @@
#
# Copyright (C) 2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=u-boot
PKG_VERSION:=2014.04
PKG_RELEASE:=1
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:= \
http://mirror2.openwrt.org/sources \
ftp://ftp.denx.de/pub/u-boot
PKG_MD5SUM:=6d2116d1385a66e9a59742caa9d62a54
include $(INCLUDE_DIR)/package.mk
define uboot/Default
TITLE:=
CONFIG:=
IMAGE:=
endef
define uboot/ox820
TITLE:=U-Boot for the Oxford/PLX NAS7820
endef
UBOOTS:=ox820
define Package/uboot/template
define Package/uboot-oxnas-$(1)
SECTION:=boot
CATEGORY:=Boot Loaders
DEPENDS:=@TARGET_oxnas
TITLE:=$(2)
URL:=http://www.denx.de/wiki/U-Boot
VARIANT:=$(1)
MAINTAINER:=Daniel Golle <daniel@makrotopia.org>
endef
endef
define BuildUBootPackage
$(eval $(uboot/Default))
$(eval $(uboot/$(1)))
$(call Package/uboot/template,$(1),$(TITLE))
endef
ifdef BUILD_VARIANT
$(eval $(call uboot/$(BUILD_VARIANT)))
UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
endif
define Build/Prepare
$(call Build/Prepare/Default)
$(CP) ./files/* $(PKG_BUILD_DIR)
find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
endef
define Build/Configure
$(MAKE) -C $(PKG_BUILD_DIR) \
$(UBOOT_CONFIG)_config
endef
define Build/Compile
$(MAKE) -C $(PKG_BUILD_DIR) \
u-boot.bin \
CROSS_COMPILE=$(TARGET_CROSS)
endef
define Package/uboot/install/default
$(INSTALL_DIR) $(BIN_DIR)
$(CP) $(PKG_BUILD_DIR)/u-boot.bin \
$(BIN_DIR)/openwrt-$(BOARD)-$(1)-u-boot.bin
endef
define Package/uboot/install/template
define Package/uboot-oxnas-$(1)/install
$(call Package/uboot/install/default,$(2))
endef
endef
$(foreach u,$(UBOOTS), \
$(eval $(call Package/uboot/install/template,$(u),$(u))) \
)
$(foreach u,$(UBOOTS), \
$(eval $(call BuildUBootPackage,$(u))) \
$(eval $(call BuildPackage,uboot-oxnas-$(u))) \
)

View File

@ -0,0 +1,13 @@
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += reset.o
obj-y += timer.o
obj-y += clock.o
obj-y += pinmux.o

View File

@ -0,0 +1,97 @@
#include <common.h>
#include <asm/arch/sysctl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
typedef struct {
unsigned short mhz;
unsigned char refdiv;
unsigned char outdiv;
unsigned int fbdiv;
unsigned short bwadj;
unsigned short sfreq;
unsigned int sslope;
} PLL_CONFIG;
const PLL_CONFIG C_PLL_CONFIG[] = {
{ 500, 1, 2, 3932160, 119, 208, 189 }, // 500 MHz
{ 525, 2, 1, 4128768, 125, 139, 297 }, // 525 MHz
{ 550, 2, 1, 4325376, 131, 139, 311 }, // 550 MHz
{ 575, 2, 1, 4521984, 137, 139, 326 }, // 575 MHz
{ 600, 2, 1, 4718592, 143, 138, 339 }, // 600 MHz
{ 625, 1, 1, 3276800, 99, 208, 157 }, // 625 MHz
{ 650, 1, 1, 3407872, 103, 208, 164 }, // 650 MHz
{ 675, 1, 1, 3538944, 107, 208, 170 }, // 675 MHz
{ 700, 0, 0, 917504, 27, 416, 22 }, // 700 MHz
{ 725, 1, 1, 3801088, 115, 208, 182 }, // 725 MHz
{ 750, 0, 0, 983040, 29, 416, 23 }, // 750 MHz
{ 775, 3, 0, 4063232, 123, 104, 390 }, // 775 MHz
{ 800, 3, 0, 4194304, 127, 104, 403 }, // 800 MHz
{ 825, 3, 0, 4325376, 131, 104, 415 }, // 825 MHz
{ 850, 2, 0, 3342336, 101, 139, 241 }, // 850 MHz
{ 875, 2, 0, 3440640, 104, 139, 248 }, // 875 MHz
{ 900, 2, 0, 3538944, 107, 139, 255 }, // 900 MHz
{ 925, 2, 0, 3637248, 110, 139, 262 }, // 925 MHz
{ 950, 2, 0, 3735552, 113, 139, 269 }, // 950 MHz
{ 975, 2, 0, 3833856, 116, 139, 276 }, // 975 MHz
{ 1000, 2, 0, 3932160, 119, 139, 283 }, // 1000 MHz
};
#define PLL_BYPASS (1<<1)
#define SAT_ENABLE (1<<3)
#define PLL_OUTDIV_SHIFT 4
#define PLL_REFDIV_SHIFT 8
#define PLL_BWADJ_SHIFT 16
#define PLL_LOW_FREQ 500
#define PLL_FREQ_STEP 25
static void plla_configure(int outdiv, int refdiv, int fbdiv, int bwadj,
int sfreq, int sslope)
{
setbits_le32(SYS_CTRL_PLLA_CTRL0, PLL_BYPASS);
udelay(10);
reset_block(SYS_CTRL_RST_PLLA, 1);
udelay(10);
writel((refdiv << PLL_REFDIV_SHIFT) | (outdiv << PLL_OUTDIV_SHIFT) |
SAT_ENABLE | PLL_BYPASS,
SYS_CTRL_PLLA_CTRL0);
writel(fbdiv, SYS_CTRL_PLLA_CTRL1);
writel((bwadj << PLL_BWADJ_SHIFT) | sfreq, SYS_CTRL_PLLA_CTRL2);
writel(sslope, SYS_CTRL_PLLA_CTRL3);
udelay(10); // 5us delay required (from TCI datasheet), use 10us
reset_block(SYS_CTRL_RST_PLLA, 0);
udelay(100); // Delay for PLL to lock
printf(" plla_ctrl0 : %08x\n", readl(SYS_CTRL_PLLA_CTRL0));
printf(" plla_ctrl1 : %08x\n", readl(SYS_CTRL_PLLA_CTRL1));
printf(" plla_ctrl2 : %08x\n", readl(SYS_CTRL_PLLA_CTRL2));
printf(" plla_ctrl3 : %08x\n", readl(SYS_CTRL_PLLA_CTRL3));
clrbits_le32(SYS_CTRL_PLLA_CTRL0, PLL_BYPASS); // Take PLL out of bypass
puts("\nPLLA Set\n");
}
int plla_set_config(int mhz)
{
int index = (mhz - PLL_LOW_FREQ) / PLL_FREQ_STEP;
const PLL_CONFIG *cfg;
if (index < 0 || index > ARRAY_SIZE(C_PLL_CONFIG)) {
debug("Freq %d MHz out of range, default to lowest\n", mhz);
index = 0;
}
cfg = &C_PLL_CONFIG[index];
printf("Attempting to set PLLA to %d MHz ...\n", (unsigned) cfg->mhz);
plla_configure(cfg->outdiv, cfg->refdiv, cfg->fbdiv, cfg->bwadj,
cfg->sfreq, cfg->sslope);
return cfg->mhz;
}

View File

@ -0,0 +1,43 @@
#include <common.h>
#include <asm/arch/pinmux.h>
void pinmux_set(int bank, int pin, int func)
{
u32 reg;
u32 base;
/* TODO: check parameters */
if (bank == PINMUX_BANK_MFA)
base = SYS_CONTROL_BASE;
else
base = SEC_CONTROL_BASE;
clrbits_le32(base + PINMUX_SECONDARY_SEL, BIT(pin));
clrbits_le32(base + PINMUX_TERTIARY_SEL, BIT(pin));
clrbits_le32(base + PINMUX_QUATERNARY_SEL, BIT(pin));
clrbits_le32(base + PINMUX_DEBUG_SEL, BIT(pin));
clrbits_le32(base + PINMUX_ALTERNATIVE_SEL, BIT(pin));
switch (func) {
case PINMUX_GPIO:
default:
return;
break;
case PINMUX_2:
reg = base + PINMUX_SECONDARY_SEL;
break;
case PINMUX_3:
reg = base + PINMUX_TERTIARY_SEL;
break;
case PINMUX_4:
reg = base + PINMUX_QUATERNARY_SEL;
break;
case PINMUX_DEBUG:
reg = base + PINMUX_DEBUG_SEL;
break;
case PINMUX_ALT:
reg = base + PINMUX_ALTERNATIVE_SEL;
break;
}
setbits_le32(reg, BIT(pin));
}

View File

@ -0,0 +1,91 @@
#include <common.h>
#include <asm/arch/sysctl.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/clock.h>
void reset_cpu(ulong addr)
{
u32 value;
// Assert reset to cores as per power on defaults
// Don't touch the DDR interface as things will come to an impromptu stop
// NB Possibly should be asserting reset for PLLB, but there are timing
// concerns here according to the docs
value =
BIT(SYS_CTRL_RST_COPRO ) |
BIT(SYS_CTRL_RST_USBHS ) |
BIT(SYS_CTRL_RST_USBHSPHYA ) |
BIT(SYS_CTRL_RST_MACA ) |
BIT(SYS_CTRL_RST_PCIEA ) |
BIT(SYS_CTRL_RST_SGDMA ) |
BIT(SYS_CTRL_RST_CIPHER ) |
BIT(SYS_CTRL_RST_SATA ) |
BIT(SYS_CTRL_RST_SATA_LINK ) |
BIT(SYS_CTRL_RST_SATA_PHY ) |
BIT(SYS_CTRL_RST_PCIEPHY ) |
BIT(SYS_CTRL_RST_STATIC ) |
BIT(SYS_CTRL_RST_UART1 ) |
BIT(SYS_CTRL_RST_UART2 ) |
BIT(SYS_CTRL_RST_MISC ) |
BIT(SYS_CTRL_RST_I2S ) |
BIT(SYS_CTRL_RST_SD ) |
BIT(SYS_CTRL_RST_MACB ) |
BIT(SYS_CTRL_RST_PCIEB ) |
BIT(SYS_CTRL_RST_VIDEO ) |
BIT(SYS_CTRL_RST_USBHSPHYB ) |
BIT(SYS_CTRL_RST_USBDEV );
writel(value, SYS_CTRL_RST_SET_CTRL);
// Release reset to cores as per power on defaults
writel(BIT(SYS_CTRL_RST_GPIO), SYS_CTRL_RST_CLR_CTRL);
// Disable clocks to cores as per power-on defaults - must leave DDR
// related clocks enabled otherwise we'll stop rather abruptly.
value =
BIT(SYS_CTRL_CLK_COPRO) |
BIT(SYS_CTRL_CLK_DMA) |
BIT(SYS_CTRL_CLK_CIPHER) |
BIT(SYS_CTRL_CLK_SD) |
BIT(SYS_CTRL_CLK_SATA) |
BIT(SYS_CTRL_CLK_I2S) |
BIT(SYS_CTRL_CLK_USBHS) |
BIT(SYS_CTRL_CLK_MAC) |
BIT(SYS_CTRL_CLK_PCIEA) |
BIT(SYS_CTRL_CLK_STATIC) |
BIT(SYS_CTRL_CLK_MACB) |
BIT(SYS_CTRL_CLK_PCIEB) |
BIT(SYS_CTRL_CLK_REF600) |
BIT(SYS_CTRL_CLK_USBDEV);
writel(value, SYS_CTRL_CLK_CLR_CTRL);
// Enable clocks to cores as per power-on defaults
// Set sys-control pin mux'ing as per power-on defaults
writel(0, SYS_CONTROL_BASE + PINMUX_SECONDARY_SEL);
writel(0, SYS_CONTROL_BASE + PINMUX_TERTIARY_SEL);
writel(0, SYS_CONTROL_BASE + PINMUX_QUATERNARY_SEL);
writel(0, SYS_CONTROL_BASE + PINMUX_DEBUG_SEL);
writel(0, SYS_CONTROL_BASE + PINMUX_ALTERNATIVE_SEL);
writel(0, SYS_CONTROL_BASE + PINMUX_PULLUP_SEL);
writel(0, SEC_CONTROL_BASE + PINMUX_SECONDARY_SEL);
writel(0, SEC_CONTROL_BASE + PINMUX_TERTIARY_SEL);
writel(0, SEC_CONTROL_BASE + PINMUX_QUATERNARY_SEL);
writel(0, SEC_CONTROL_BASE + PINMUX_DEBUG_SEL);
writel(0, SEC_CONTROL_BASE + PINMUX_ALTERNATIVE_SEL);
writel(0, SEC_CONTROL_BASE + PINMUX_PULLUP_SEL);
// No need to save any state, as the ROM loader can determine whether reset
// is due to power cycling or programatic action, just hit the (self-
// clearing) CPU reset bit of the block reset register
value =
BIT(SYS_CTRL_RST_SCU) |
BIT(SYS_CTRL_RST_ARM0) |
BIT(SYS_CTRL_RST_ARM1);
writel(value, SYS_CTRL_RST_SET_CTRL);
}

View File

@ -0,0 +1,129 @@
/*
* (C) Copyright 2004
* Texas Instruments
* Richard Woodruff <r-woodruff2@ti.com>
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
* Alex Zuepke <azu@sysgo.de>
*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (1 << (CONFIG_TIMER_PRESCALE * 4)))
#define TIMER_LOAD_VAL 0xFFFFFF
/* macro to read the 32 bit timer */
#define READ_TIMER (TIMER_LOAD_VAL - readl(CONFIG_SYS_TIMERBASE + TIMER_CURR)) \
/ (TIMER_CLOCK / CONFIG_SYS_HZ)
#define READ_TIMER_HW (TIMER_LOAD_VAL - readl(CONFIG_SYS_TIMERBASE + TIMER_CURR))
DECLARE_GLOBAL_DATA_PTR;
int timer_init (void)
{
int32_t val;
/* Start the counter ticking up */
writel(TIMER_LOAD_VAL, CONFIG_SYS_TIMERBASE + TIMER_LOAD); /* reload value on overflow*/
val = (CONFIG_TIMER_PRESCALE << TIMER_PRESCALE_SHIFT) |
(TIMER_MODE_PERIODIC << TIMER_MODE_SHIFT) |
(TIMER_ENABLE << TIMER_ENABLE_SHIFT); /* mask to enable timer*/
writel(val, CONFIG_SYS_TIMERBASE + TIMER_CTRL); /* start timer */
/* reset time */
gd->arch.lastinc = READ_TIMER; /* capture current incrementer value */
gd->arch.tbl = 0; /* start "advancing" time stamp */
return(0);
}
/*
* timer without interrupts
*/
ulong get_timer (ulong base)
{
return get_timer_masked () - base;
}
/* delay x useconds AND preserve advance timestamp value */
void __udelay (unsigned long usec)
{
ulong tmo, tmp;
if (usec > 100000) { /* if "big" number, spread normalization to seconds */
tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */
tmo /= 1000; /* finish normalize. */
tmp = get_timer (0); /* get current timestamp */
while (get_timer (tmp) < tmo)/* loop till event */
/*NOP*/;
} else { /* else small number, convert to hw ticks */
tmo = usec * (TIMER_CLOCK / 1000) / 1000;
/* timeout is no more than 0.1s, and the hw timer will roll over at most once */
tmp = READ_TIMER_HW;
while (((READ_TIMER_HW -tmp) & TIMER_LOAD_VAL) < tmo)/* loop till event */
/*NOP*/;
}
}
ulong get_timer_masked (void)
{
ulong now = READ_TIMER; /* current tick value */
if (now >= gd->arch.lastinc) { /* normal mode (non roll) */
/* move stamp fordward with absoulte diff ticks */
gd->arch.tbl += (now - gd->arch.lastinc);
} else {
/* we have rollover of incrementer */
gd->arch.tbl += ((TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ))
- gd->arch.lastinc) + now;
}
gd->arch.lastinc = now;
return gd->arch.tbl;
}
/*
* This function is derived from PowerPC code (read timebase as long long).
* On ARM it just returns the timer value.
*/
unsigned long long get_ticks(void)
{
return get_timer(0);
}
/*
* This function is derived from PowerPC code (timebase clock frequency).
* On ARM it returns the number of timer ticks per second.
*/
ulong get_tbclk (void)
{
ulong tbclk;
tbclk = CONFIG_SYS_HZ;
return tbclk;
}

View File

@ -0,0 +1,84 @@
#ifndef _NAS782X_CLOCK_H
#define _NAS782X_CLOCK_H
#include <asm/arch/sysctl.h>
#include <asm/arch/cpu.h>
/* bit numbers of clock control register */
#define SYS_CTRL_CLK_COPRO 0
#define SYS_CTRL_CLK_DMA 1
#define SYS_CTRL_CLK_CIPHER 2
#define SYS_CTRL_CLK_SD 3
#define SYS_CTRL_CLK_SATA 4
#define SYS_CTRL_CLK_I2S 5
#define SYS_CTRL_CLK_USBHS 6
#define SYS_CTRL_CLK_MACA 7
#define SYS_CTRL_CLK_MAC SYS_CTRL_CLK_MACA
#define SYS_CTRL_CLK_PCIEA 8
#define SYS_CTRL_CLK_STATIC 9
#define SYS_CTRL_CLK_MACB 10
#define SYS_CTRL_CLK_PCIEB 11
#define SYS_CTRL_CLK_REF600 12
#define SYS_CTRL_CLK_USBDEV 13
#define SYS_CTRL_CLK_DDR 14
#define SYS_CTRL_CLK_DDRPHY 15
#define SYS_CTRL_CLK_DDRCK 16
/* bit numbers of reset control register */
#define SYS_CTRL_RST_SCU 0
#define SYS_CTRL_RST_COPRO 1
#define SYS_CTRL_RST_ARM0 2
#define SYS_CTRL_RST_ARM1 3
#define SYS_CTRL_RST_USBHS 4
#define SYS_CTRL_RST_USBHSPHYA 5
#define SYS_CTRL_RST_MACA 6
#define SYS_CTRL_RST_MAC SYS_CTRL_RST_MACA
#define SYS_CTRL_RST_PCIEA 7
#define SYS_CTRL_RST_SGDMA 8
#define SYS_CTRL_RST_CIPHER 9
#define SYS_CTRL_RST_DDR 10
#define SYS_CTRL_RST_SATA 11
#define SYS_CTRL_RST_SATA_LINK 12
#define SYS_CTRL_RST_SATA_PHY 13
#define SYS_CTRL_RST_PCIEPHY 14
#define SYS_CTRL_RST_STATIC 15
#define SYS_CTRL_RST_GPIO 16
#define SYS_CTRL_RST_UART1 17
#define SYS_CTRL_RST_UART2 18
#define SYS_CTRL_RST_MISC 19
#define SYS_CTRL_RST_I2S 20
#define SYS_CTRL_RST_SD 21
#define SYS_CTRL_RST_MACB 22
#define SYS_CTRL_RST_PCIEB 23
#define SYS_CTRL_RST_VIDEO 24
#define SYS_CTRL_RST_DDR_PHY 25
#define SYS_CTRL_RST_USBHSPHYB 26
#define SYS_CTRL_RST_USBDEV 27
#define SYS_CTRL_RST_ARMDBG 29
#define SYS_CTRL_RST_PLLA 30
#define SYS_CTRL_RST_PLLB 31
static inline void reset_block(int block, int reset)
{
u32 reg;
if (reset)
reg = SYS_CTRL_RST_SET_CTRL;
else
reg = SYS_CTRL_RST_CLR_CTRL;
writel(BIT(block), reg);
}
static inline void enable_clock(int block)
{
writel(BIT(block), SYS_CTRL_CLK_SET_CTRL);
}
static inline void disable_clock(int block)
{
writel(BIT(block), SYS_CTRL_CLK_CLR_CTRL);
}
int plla_set_config(int idx);
#endif /* _NAS782X_CLOCK_H */

View File

@ -0,0 +1,26 @@
#ifndef _NAS782X_CPU_H
#define _NAS782X_CPU_H
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
#include <asm/types.h>
#include <asm/io.h>
#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
#include <asm/arch/hardware.h>
#include <asm/arch/timer.h>
#ifndef __KERNEL_STRICT_NAMES
#ifndef __ASSEMBLY__
#define BIT(x) (1 << (x))
/* fix "implicit declaration of function" warnning */
void *memalign(size_t alignment, size_t bytes);
void free(void* mem);
void *malloc(size_t bytes);
void *calloc(size_t n, size_t elem_size);
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL_STRICT_NAMES */
#endif /* _NAS782X_CPU_H */

View File

@ -0,0 +1,30 @@
#ifndef _NAS782X_HARDWARE_H
#define _NAS782X_HARDWARE_H
/* Core addresses */
#define USB_HOST_BASE 0x40200000
#define MACA_BASE 0x40400000
#define MACB_BASE 0x40800000
#define MAC_BASE MACA_BASE
#define STATIC_CS0_BASE 0x41000000
#define STATIC_CS1_BASE 0x41400000
#define STATIC_CONTROL_BASE 0x41C00000
#define SATA_DATA_BASE 0x42000000 /* non-functional, DMA just needs an address */
#define GPIO_1_BASE 0x44000000
#define GPIO_2_BASE 0x44100000
#define UART_1_BASE 0x44200000
#define UART_2_BASE 0x44300000
#define SYS_CONTROL_BASE 0x44e00000
#define SEC_CONTROL_BASE 0x44f00000
#define RPSA_BASE 0x44400000
#define RPSC_BASE 0x44500000
#define DDR_BASE 0x44700000
#define SATA_BASE 0x45900000
#define SATA_0_REGS_BASE 0x45900000
#define SATA_1_REGS_BASE 0x45910000
#define SATA_DMA_REGS_BASE 0x459a0000
#define SATA_SGDMA_REGS_BASE 0x459b0000
#define SATA_HOST_REGS_BASE 0x459e0000
#endif /* _NAS782X_HARDWARE_H */

View File

@ -0,0 +1,46 @@
#ifndef _NAS782X_PINMUX_H
#define _NAS782X_PINMUX_H
#include <asm/arch/cpu.h>
#define PINMUX_GPIO 0
#define PINMUX_2 1
#define PINMUX_3 2
#define PINMUX_4 3
#define PINMUX_DEBUG 4
#define PINMUX_ALT 5
#define PINMUX_BANK_MFA 0
#define PINMUX_BANK_MFB 1
/* System control multi-function pin function selection */
#define PINMUX_SECONDARY_SEL 0x14
#define PINMUX_TERTIARY_SEL 0x8c
#define PINMUX_QUATERNARY_SEL 0x94
#define PINMUX_DEBUG_SEL 0x9c
#define PINMUX_ALTERNATIVE_SEL 0xa4
#define PINMUX_PULLUP_SEL 0xac
#define PINMUX_UARTA_SIN PINMUX_ALT
#define PINMUX_UARTA_SOUT PINMUX_ALT
#define PINMUX_STATIC_DATA0 PINMUX_2
#define PINMUX_STATIC_DATA1 PINMUX_2
#define PINMUX_STATIC_DATA2 PINMUX_2
#define PINMUX_STATIC_DATA3 PINMUX_2
#define PINMUX_STATIC_DATA4 PINMUX_2
#define PINMUX_STATIC_DATA5 PINMUX_2
#define PINMUX_STATIC_DATA6 PINMUX_2
#define PINMUX_STATIC_DATA7 PINMUX_2
#define PINMUX_STATIC_NWE PINMUX_2
#define PINMUX_STATIC_NOE PINMUX_2
#define PINMUX_STATIC_NCS PINMUX_2
#define PINMUX_STATIC_ADDR18 PINMUX_2
#define PINMUX_STATIC_ADDR19 PINMUX_2
#define PINMUX_MACA_MDC PINMUX_2
#define PINMUX_MACA_MDIO PINMUX_2
extern void pinmux_set(int bank, int pin, int func);
#endif /* _NAS782X_PINMUX_H */

View File

@ -0,0 +1,6 @@
#ifndef _NAS782X_SPL_H
#define _NAS782X_SPL_H
#include <asm/arch/cpu.h>
#endif /* _NAS782X_SPL_H */

View File

@ -0,0 +1,125 @@
#ifndef _NAS782X_SYSCTL_H
#define _NAS782X_SYSCTL_H
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
#include <asm/types.h>
#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
#include <asm/arch/hardware.h>
/**
* System block reset and clock control
*/
#define SYS_CTRL_PCI_STAT (SYS_CONTROL_BASE + 0x20)
#define SYS_CTRL_CLK_SET_CTRL (SYS_CONTROL_BASE + 0x2C)
#define SYS_CTRL_CLK_CLR_CTRL (SYS_CONTROL_BASE + 0x30)
#define SYS_CTRL_RST_SET_CTRL (SYS_CONTROL_BASE + 0x34)
#define SYS_CTRL_RST_CLR_CTRL (SYS_CONTROL_BASE + 0x38)
#define SYS_CTRL_PLLSYS_CTRL (SYS_CONTROL_BASE + 0x48)
#define SYS_CTRL_PLLSYS_KEY_CTRL (SYS_CONTROL_BASE + 0x6C)
#define SYS_CTRL_GMAC_CTRL (SYS_CONTROL_BASE + 0x78)
/* Scratch registers */
#define SYS_CTRL_SCRATCHWORD0 (SYS_CONTROL_BASE + 0xc4)
#define SYS_CTRL_SCRATCHWORD1 (SYS_CONTROL_BASE + 0xc8)
#define SYS_CTRL_SCRATCHWORD2 (SYS_CONTROL_BASE + 0xcc)
#define SYS_CTRL_SCRATCHWORD3 (SYS_CONTROL_BASE + 0xd0)
#define SYS_CTRL_PLLA_CTRL0 (SYS_CONTROL_BASE + 0x1F0)
#define SYS_CTRL_PLLA_CTRL1 (SYS_CONTROL_BASE + 0x1F4)
#define SYS_CTRL_PLLA_CTRL2 (SYS_CONTROL_BASE + 0x1F8)
#define SYS_CTRL_PLLA_CTRL3 (SYS_CONTROL_BASE + 0x1FC)
#define SYS_CTRL_GMAC_AUTOSPEED 3
#define SYS_CTRL_GMAC_RGMII 2
#define SYS_CTRL_GMAC_SIMPLE_MUX 1
#define SYS_CTRL_GMAC_CKEN_GTX 0
#define SYS_CTRL_CKCTRL_CTRL_ADDR (SYS_CONTROL_BASE + 0x64)
#define SYS_CTRL_CKCTRL_PCI_DIV_BIT 0
#define SYS_CTRL_CKCTRL_SLOW_BIT 8
#define SYS_CTRL_USBHSMPH_CTRL (SYS_CONTROL_BASE + 0x40)
#define SYS_CTRL_USBHSMPH_STAT (SYS_CONTROL_BASE + 0x44)
#define SYS_CTRL_REF300_DIV (SYS_CONTROL_BASE + 0xF8)
#define SYS_CTRL_USBHSPHY_CTRL (SYS_CONTROL_BASE + 0x84)
#define SYS_CTRL_USB_CTRL (SYS_CONTROL_BASE + 0x90)
/* System control multi-function pin function selection */
#define SYS_CTRL_SECONDARY_SEL (SYS_CONTROL_BASE + 0x14)
#define SYS_CTRL_TERTIARY_SEL (SYS_CONTROL_BASE + 0x8c)
#define SYS_CTRL_QUATERNARY_SEL (SYS_CONTROL_BASE + 0x94)
#define SYS_CTRL_DEBUG_SEL (SYS_CONTROL_BASE + 0x9c)
#define SYS_CTRL_ALTERNATIVE_SEL (SYS_CONTROL_BASE + 0xa4)
#define SYS_CTRL_PULLUP_SEL (SYS_CONTROL_BASE + 0xac)
/* Secure control multi-function pin function selection */
#define SEC_CTRL_SECONDARY_SEL (SEC_CONTROL_BASE + 0x14)
#define SEC_CTRL_TERTIARY_SEL (SEC_CONTROL_BASE + 0x8c)
#define SEC_CTRL_QUATERNARY_SEL (SEC_CONTROL_BASE + 0x94)
#define SEC_CTRL_DEBUG_SEL (SEC_CONTROL_BASE + 0x9c)
#define SEC_CTRL_ALTERNATIVE_SEL (SEC_CONTROL_BASE + 0xa4)
#define SEC_CTRL_PULLUP_SEL (SEC_CONTROL_BASE + 0xac)
#define SEC_CTRL_COPRO_CTRL (SEC_CONTROL_BASE + 0x68)
#define SEC_CTRL_SECURE_CTRL (SEC_CONTROL_BASE + 0x98)
#define SEC_CTRL_LEON_DEBUG (SEC_CONTROL_BASE + 0xF0)
#define SEC_CTRL_PLLB_DIV_CTRL (SEC_CONTROL_BASE + 0xF8)
#define SEC_CTRL_PLLB_CTRL0 (SEC_CONTROL_BASE + 0x1F0)
#define SEC_CTRL_PLLB_CTRL1 (SEC_CONTROL_BASE + 0x1F4)
#define SEC_CTRL_PLLB_CTRL8 (SEC_CONTROL_BASE + 0x1F4)
#define REF300_DIV_INT_SHIFT 8
#define REF300_DIV_FRAC_SHIFT 0
#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT)
#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT)
#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16
#define USBHSPHY_SUSPENDM_MANUAL_STATE 15
#define USBHSPHY_ATE_ESET 14
#define USBHSPHY_TEST_DIN 6
#define USBHSPHY_TEST_ADD 2
#define USBHSPHY_TEST_DOUT_SEL 1
#define USBHSPHY_TEST_CLK 0
#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5
#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
#define USBAMUX_DEVICE BIT(4)
#define USBPHY_REFCLKDIV_SHIFT 2
#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT)
#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT)
#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT)
#define USB_CTRL_USB_CKO_SEL_BIT 0
#define USB_INT_CLK_XTAL 0
#define USB_INT_CLK_REF300 2
#define USB_INT_CLK_PLLB 3
#define SYS_CTRL_GMAC_AUTOSPEED 3
#define SYS_CTRL_GMAC_RGMII 2
#define SYS_CTRL_GMAC_SIMPLE_MUX 1
#define SYS_CTRL_GMAC_CKEN_GTX 0
#define PLLB_ENSAT 3
#define PLLB_OUTDIV 4
#define PLLB_REFDIV 8
#define PLLB_DIV_INT_SHIFT 8
#define PLLB_DIV_FRAC_SHIFT 0
#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT)
#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT)
#ifndef __KERNEL_STRICT_NAMES
#ifndef __ASSEMBLY__
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL_STRICT_NAMES */
#endif /* _NAS782X_SYSCTL_H */

View File

@ -0,0 +1,23 @@
#ifndef _NAS782X_TIMER_H
#define _NAS782X_TIMER_H
#define TIMER1_BASE (RPSA_BASE + 0x200)
#define TIMER2_BASE (RPSA_BASE + 0x220)
#define TIMER_LOAD 0
#define TIMER_CURR 4
#define TIMER_CTRL 8
#define TIMER_INTR 0x0C
#define TIMER_PRESCALE_SHIFT 2
#define TIMER_PRESCALE_1 0
#define TIMER_PRESCALE_16 1
#define TIMER_PRESCALE_256 2
#define TIMER_MODE_SHIFT 6
#define TIMER_MODE_FREE_RUNNING 0
#define TIMER_MODE_PERIODIC 1
#define TIMER_ENABLE_SHIFT 7
#define TIMER_DISABLE 0
#define TIMER_ENABLE 1
#endif /* _NAS782X_TIMER_H */

View File

@ -0,0 +1,15 @@
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += ox820.o
obj-y += lowlevel_init.o
obj-$(CONFIG_SPL_BUILD) += spl_start.o
obj-$(CONFIG_SPL_BUILD) += ddr.o

View File

@ -0,0 +1,477 @@
/*******************************************************************
*
* File: ddr_oxsemi.c
*
* Description: Declarations for DDR routines and data objects
*
* Author: Julien Margetts
*
* Copyright: Oxford Semiconductor Ltd, 2009
*/
#include <common.h>
#include <asm/arch/clock.h>
#include "ddr.h"
typedef unsigned int UINT;
// DDR TIMING PARAMETERS
typedef struct {
unsigned int holdoff_cmd_A;
unsigned int holdoff_cmd_ARW;
unsigned int holdoff_cmd_N;
unsigned int holdoff_cmd_LM;
unsigned int holdoff_cmd_R;
unsigned int holdoff_cmd_W;
unsigned int holdoff_cmd_PC;
unsigned int holdoff_cmd_RF;
unsigned int holdoff_bank_R;
unsigned int holdoff_bank_W;
unsigned int holdoff_dir_RW;
unsigned int holdoff_dir_WR;
unsigned int holdoff_FAW;
unsigned int latency_CAS;
unsigned int latency_WL;
unsigned int recovery_WR;
unsigned int width_update;
unsigned int odt_offset;
unsigned int odt_drive_all;
unsigned int use_fixed_re;
unsigned int delay_wr_to_re;
unsigned int wr_slave_ratio;
unsigned int rd_slave_ratio0;
unsigned int rd_slave_ratio1;
} T_DDR_TIMING_PARAMETERS;
// DDR CONFIG PARAMETERS
typedef struct {
unsigned int ddr_mode;
unsigned int width;
unsigned int blocs;
unsigned int banks8;
unsigned int rams;
unsigned int asize;
unsigned int speed;
unsigned int cmd_mode_wr_cl_bl;
} T_DDR_CONFIG_PARAMETERS;
//cmd_mode_wr_cl_bl
//when SDR : cmd_mode_wr_cl_bl = 0x80200002 + (latency_CAS_RAM * 16) + (recovery_WR - 1) * 512; -- Sets write rec XX, CL=XX; BL=8
//else cmd_mode_wr_cl_bl = 0x80200003 + (latency_CAS_RAM * 16) + (recovery_WR - 1) * 512; -- Sets write rec XX, CL=XX; BL=8
// cmd_ bank_ dir_ lat_ rec_ width_ odt_ odt_ fix delay ratio
// A F C update offset all re re_to_we w r0 r1
// R L P R R W A A W W
//Timing Parameters A W N M R W C F R W W R W S L R
static const T_DDR_TIMING_PARAMETERS C_TP_DDR2_25E_CL5_1GB = { 4, 5, 0, 2, 4, 4,
5, 51, 23, 24, 9, 11, 18, 5, 4, 6, 3, 2, 0, 1, 2, 75, 56, 56 }; //elida device.
static const T_DDR_TIMING_PARAMETERS C_TP_DDR2_25E_CL5_2GB = { 4, 5, 0, 2, 4, 4,
5, 79, 22, 24, 9, 11, 20, 5, 4, 6, 3, 2, 0, 1, 2, 75, 56, 56 };
static const T_DDR_TIMING_PARAMETERS C_TP_DDR2_25_CL6_1GB = { 4, 5, 0, 2, 4, 4,
4, 51, 22, 26, 10, 12, 18, 6, 5, 6, 3, 2, 0, 1, 2, 75, 56, 56 }; // 400MHz, Speedgrade 25 timings (1Gb parts)
// D B B R A S
// D W L K A S P
//Config Parameters R D C 8 M Z D CMD_MODE
//static const T_DDR_CONFIG_PARAMETERS C_CP_DDR2_25E_CL5 = { 2,16, 1, 0, 1, 32,25,0x80200A53}; // 64 MByte
static const T_DDR_CONFIG_PARAMETERS C_CP_DDR2_25E_CL5 = { 2, 16, 1, 1, 1, 64,
25, 0x80200A53 }; // 128 MByte
static const T_DDR_CONFIG_PARAMETERS C_CP_DDR2_25_CL6 = { 2, 16, 1, 1, 1, 128,
25, 0x80200A63 }; // 256 MByte
static void ddr_phy_poll_until_locked(void)
{
volatile UINT reg_tmp = 0;
volatile UINT locked = 0;
//Extra read to put in delay before starting to poll...
reg_tmp = *(volatile UINT *) C_DDR_REG_PHY2; // read
//POLL C_DDR_PHY2_REG register until clock and flock
//!!! Ideally have a timeout on this.
while (locked == 0) {
reg_tmp = *(volatile UINT *) C_DDR_REG_PHY2; // read
//locked when bits 30 and 31 are set
if (reg_tmp & 0xC0000000) {
locked = 1;
}
}
}
static void ddr_poll_until_not_busy(void)
{
volatile UINT reg_tmp = 0;
volatile UINT busy = 1;
//Extra read to put in delay before starting to poll...
reg_tmp = *(volatile UINT *) C_DDR_STAT_REG; // read
//POLL DDR_STAT register until no longer busy
//!!! Ideally have a timeout on this.
while (busy == 1) {
reg_tmp = *(volatile UINT *) C_DDR_STAT_REG; // read
//when bit 31 is clear - core is no longer busy
if ((reg_tmp & 0x80000000) == 0x00000000) {
busy = 0;
}
}
}
static void ddr_issue_command(int commmand)
{
*(volatile UINT *) C_DDR_CMD_REG = commmand;
ddr_poll_until_not_busy();
}
static void ddr_timing_initialisation(
const T_DDR_TIMING_PARAMETERS *ddr_timing_parameters)
{
volatile UINT reg_tmp = 0;
/* update the DDR controller registers for timing parameters */
reg_tmp = (ddr_timing_parameters->holdoff_cmd_A << 0);
reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_ARW << 4);
reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_N << 8);
reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_LM << 12);
reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_R << 16);
reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_W << 20);
reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_PC << 24);
*(volatile UINT *) C_DDR_REG_TIMING0 = reg_tmp;
reg_tmp = (ddr_timing_parameters->holdoff_cmd_RF << 0);
reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_bank_R << 8);
reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_bank_W << 16);
reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_dir_RW << 24);
reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_dir_WR << 28);
*(volatile UINT *) C_DDR_REG_TIMING1 = reg_tmp;
reg_tmp = (ddr_timing_parameters->latency_CAS << 0);
reg_tmp = reg_tmp + (ddr_timing_parameters->latency_WL << 4);
reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_FAW << 8);
reg_tmp = reg_tmp + (ddr_timing_parameters->width_update << 16);
reg_tmp = reg_tmp + (ddr_timing_parameters->odt_offset << 21);
reg_tmp = reg_tmp + (ddr_timing_parameters->odt_drive_all << 24);
*(volatile UINT *) C_DDR_REG_TIMING2 = reg_tmp;
/* Program the timing parameters in the PHY too */
reg_tmp = (ddr_timing_parameters->use_fixed_re << 16)
| (ddr_timing_parameters->delay_wr_to_re << 8)
| (ddr_timing_parameters->latency_WL << 4)
| (ddr_timing_parameters->latency_CAS << 0);
*(volatile UINT *) C_DDR_REG_PHY_TIMING = reg_tmp;
reg_tmp = ddr_timing_parameters->wr_slave_ratio;
*(volatile UINT *) C_DDR_REG_PHY_WR_RATIO = reg_tmp;
reg_tmp = ddr_timing_parameters->rd_slave_ratio0;
reg_tmp += ddr_timing_parameters->rd_slave_ratio1 << 8;
*(volatile UINT *) C_DDR_REG_PHY_RD_RATIO = reg_tmp;
}
static void ddr_normal_initialisation(
const T_DDR_CONFIG_PARAMETERS *ddr_config_parameters, int mhz)
{
int i;
volatile UINT tmp = 0;
volatile UINT reg_tmp = 0;
volatile UINT emr_cmd = 0;
UINT refresh;
//Total size of memory in Mbits...
tmp = ddr_config_parameters->rams * ddr_config_parameters->asize
* ddr_config_parameters->width;
//Deduce value to program into DDR_CFG register...
switch (tmp) {
case 16:
reg_tmp = 0x00020000 * 1;
break;
case 32:
reg_tmp = 0x00020000 * 2;
break;
case 64:
reg_tmp = 0x00020000 * 3;
break;
case 128:
reg_tmp = 0x00020000 * 4;
break;
case 256:
reg_tmp = 0x00020000 * 5;
break;
case 512:
reg_tmp = 0x00020000 * 6;
break;
case 1024:
reg_tmp = 0x00020000 * 7;
break;
case 2048:
reg_tmp = 0x00020000 * 8;
break;
default:
reg_tmp = 0; //forces sims not to work if badly configured
}
//Memory width
tmp = ddr_config_parameters->rams * ddr_config_parameters->width;
switch (tmp) {
case 8:
reg_tmp = reg_tmp + 0x00400000;
break;
case 16:
reg_tmp = reg_tmp + 0x00200000;
break;
case 32:
reg_tmp = reg_tmp + 0x00000000;
break;
default:
reg_tmp = 0; //forces sims not to work if badly configured
}
//Setup DDR Mode
switch (ddr_config_parameters->ddr_mode) {
case 0:
reg_tmp = reg_tmp + 0x00000000;
break; //SDR
case 1:
reg_tmp = reg_tmp + 0x40000000;
break; //DDR
case 2:
reg_tmp = reg_tmp + 0x80000000;
break; //DDR2
default:
reg_tmp = 0; //forces sims not to work if badly configured
}
//Setup Banks
if (ddr_config_parameters->banks8 == 1) {
reg_tmp = reg_tmp + 0x00800000;
}
//Program DDR_CFG register...
*(volatile UINT *) C_DDR_CFG_REG = reg_tmp;
//Configure PHY0 reg - se_mode is bit 1,
//needs to be 1 for DDR (single_ended drive)
switch (ddr_config_parameters->ddr_mode) {
case 0:
reg_tmp = 2 + (0 << 4);
break; //SDR
case 1:
reg_tmp = 2 + (4 << 4);
break; //DDR
case 2:
reg_tmp = 0 + (4 << 4);
break; //DDR2
default:
reg_tmp = 0;
}
//Program DDR_PHY0 register...
*(volatile UINT *) C_DDR_REG_PHY0 = reg_tmp;
//Read DDR_PHY* registers to exercise paths for vcd
reg_tmp = *(volatile UINT *) C_DDR_REG_PHY3;
reg_tmp = *(volatile UINT *) C_DDR_REG_PHY2;
reg_tmp = *(volatile UINT *) C_DDR_REG_PHY1;
reg_tmp = *(volatile UINT *) C_DDR_REG_PHY0;
//Start up sequences - Different dependant on DDR mode
switch (ddr_config_parameters->ddr_mode) {
case 2: //DDR2
//Start-up sequence: follows procedure described in Micron datasheet.
//start up DDR PHY DLL
reg_tmp = 0x00022828; // dll on, start point and inc = h28
*(volatile UINT *) C_DDR_REG_PHY2 = reg_tmp;
reg_tmp = 0x00032828; // start on, dll on, start point and inc = h28
*(volatile UINT *) C_DDR_REG_PHY2 = reg_tmp;
ddr_phy_poll_until_locked();
udelay(200); //200us
//Startup SDRAM...
//!!! Software: CK should be running for 200us before wake-up
ddr_issue_command( C_CMD_WAKE_UP);
ddr_issue_command( C_CMD_NOP);
ddr_issue_command( C_CMD_PRECHARGE_ALL);
ddr_issue_command( C_CMD_DDR2_EMR2);
ddr_issue_command( C_CMD_DDR2_EMR3);
emr_cmd = C_CMD_DDR2_EMR1 + C_CMD_ODT_75 + C_CMD_REDUCED_DRIVE
+ C_CMD_ENABLE_DLL;
ddr_issue_command(emr_cmd);
//Sets CL=3; BL=8 but also reset DLL to trigger a DLL initialisation...
udelay(1); //1us
ddr_issue_command(
ddr_config_parameters->cmd_mode_wr_cl_bl
+ C_CMD_RESET_DLL);
udelay(1); //1us
//!!! Software: Wait 200 CK cycles before...
//for(i=1; i<=2; i++) {
ddr_issue_command(C_CMD_PRECHARGE_ALL);
// !!! Software: Wait here at least 8 CK cycles
//}
//need a wait here to ensure PHY DLL lock before the refresh is issued
udelay(1); //1us
for (i = 1; i <= 2; i++) {
ddr_issue_command( C_CMD_AUTO_REFRESH);
//!!! Software: Wait here at least 8 CK cycles to satify tRFC
udelay(1); //1us
}
//As before but without 'RESET_DLL' bit set...
ddr_issue_command(ddr_config_parameters->cmd_mode_wr_cl_bl);
udelay(1); //1us
// OCD commands
ddr_issue_command(emr_cmd + C_CMD_MODE_DDR2_OCD_DFLT);
ddr_issue_command(emr_cmd + C_CMD_MODE_DDR2_OCD_EXIT);
break;
default:
break; //Do nothing
}
//Enable auto-refresh
// 8192 Refreshes required every 64ms, so maximum refresh period is 7.8125 us
// We have a 400 MHz DDR clock (2.5ns period) so max period is 3125 cycles
// Our core now does 8 refreshes in a go, so we multiply this period by 8
refresh = (64000 * mhz) / 8192; // Refresh period in clocks
reg_tmp = *(volatile UINT *) C_DDR_CFG_REG; // read
#ifdef BURST_REFRESH_ENABLE
reg_tmp |= C_CFG_REFRESH_ENABLE | (refresh * 8);
reg_tmp |= C_CFG_BURST_REFRESH_ENABLE;
#else
reg_tmp |= C_CFG_REFRESH_ENABLE | (refresh * 1);
reg_tmp &= ~C_CFG_BURST_REFRESH_ENABLE;
#endif
*(volatile UINT *) C_DDR_CFG_REG = reg_tmp;
//Verify register contents
reg_tmp = *(volatile UINT *) C_DDR_REG_PHY2; // read
//printf("Warning XXXXXXXXXXXXXXXXXXXXXX - get bad read data from C_DDR_PHY2_REG, though it looks OK on bus XXXXXXXXXXXXXXXXXX");
//TBD Check_data (read_data, dll_reg, "Error: bad C_DDR_PHY2_REG read", tb_pass);
reg_tmp = *(volatile UINT *) C_DDR_CFG_REG; // read
//TBD Check_data (read_data, cfg_reg, "Error: bad DDR_CFG read", tb_pass);
//disable optimised wrapping
if (ddr_config_parameters->ddr_mode == 2) {
reg_tmp = 0xFFFF0000;
*(volatile UINT *) C_DDR_REG_IGNORE = reg_tmp;
}
//enable midbuffer followon
reg_tmp = *(volatile UINT *) C_DDR_ARB_REG; // read
reg_tmp = 0xFFFF0000 | reg_tmp;
*(volatile UINT *) C_DDR_ARB_REG = reg_tmp;
// Enable write behind coherency checking for all clients
reg_tmp = 0xFFFF0000;
*(volatile UINT *) C_DDR_AHB4_REG = reg_tmp;
//Wait for 200 clock cycles for SDRAM DLL to lock...
udelay(1); //1us
}
// Function used to Setup DDR core
void ddr_setup(int mhz)
{
static const T_DDR_TIMING_PARAMETERS *ddr_timing_parameters =
&C_TP_DDR2_25_CL6_1GB;
static const T_DDR_CONFIG_PARAMETERS *ddr_config_parameters =
&C_CP_DDR2_25_CL6;
//Bring core out of Reset
*(volatile UINT *) C_DDR_BLKEN_REG = C_BLKEN_DDR_ON;
//DDR TIMING INITIALISTION
ddr_timing_initialisation(ddr_timing_parameters);
//DDR NORMAL INITIALISATION
ddr_normal_initialisation(ddr_config_parameters, mhz);
// route all writes through one client
*(volatile UINT *) C_DDR_TRANSACTION_ROUTING = (0
<< DDR_ROUTE_CPU0_INSTR_SHIFT)
| (1 << DDR_ROUTE_CPU0_RDDATA_SHIFT)
| (3 << DDR_ROUTE_CPU0_WRDATA_SHIFT)
| (2 << DDR_ROUTE_CPU1_INSTR_SHIFT)
| (3 << DDR_ROUTE_CPU1_RDDATA_SHIFT)
| (3 << DDR_ROUTE_CPU1_WRDATA_SHIFT);
//Bring all clients out of reset
*(volatile UINT *) C_DDR_BLKEN_REG = C_BLKEN_DDR_ON + 0x0000FFFF;
}
void set_ddr_timing(unsigned int w, unsigned int i)
{
unsigned int reg;
unsigned int wnow = 16;
unsigned int inow = 32;
/* reset all timing controls to known value (31) */
writel(DDR_PHY_TIMING_W_RST | DDR_PHY_TIMING_I_RST, DDR_PHY_TIMING);
writel(DDR_PHY_TIMING_W_RST | DDR_PHY_TIMING_I_RST | DDR_PHY_TIMING_CK,
DDR_PHY_TIMING);
writel(DDR_PHY_TIMING_W_RST | DDR_PHY_TIMING_I_RST, DDR_PHY_TIMING);
/* step up or down read delay to the requested value */
while (wnow != w) {
if (wnow < w) {
reg = DDR_PHY_TIMING_INC;
wnow++;
} else {
reg = 0;
wnow--;
}
writel(DDR_PHY_TIMING_W_CE | reg, DDR_PHY_TIMING);
writel(DDR_PHY_TIMING_CK | DDR_PHY_TIMING_W_CE | reg,
DDR_PHY_TIMING);
writel(DDR_PHY_TIMING_W_CE | reg, DDR_PHY_TIMING);
}
/* now write delay */
while (inow != i) {
if (inow < i) {
reg = DDR_PHY_TIMING_INC;
inow++;
} else {
reg = 0;
inow--;
}
writel(DDR_PHY_TIMING_I_CE | reg, DDR_PHY_TIMING);
writel(DDR_PHY_TIMING_CK | DDR_PHY_TIMING_I_CE | reg,
DDR_PHY_TIMING);
writel(DDR_PHY_TIMING_I_CE | reg, DDR_PHY_TIMING);
}
}
//Function used to Setup SDRAM in DDR/SDR mode
void init_ddr(int mhz)
{
/* start clocks */
enable_clock(SYS_CTRL_CLK_DDRPHY);
enable_clock(SYS_CTRL_CLK_DDR);
enable_clock(SYS_CTRL_CLK_DDRCK);
/* bring phy and core out of reset */
reset_block(SYS_CTRL_RST_DDR_PHY, 0);
reset_block(SYS_CTRL_RST_DDR, 0);
/* DDR runs at half the speed of the CPU */
ddr_setup(mhz >> 1);
return;
}

View File

@ -0,0 +1,148 @@
/*******************************************************************
*
* File: ddr_oxsemi.h
*
* Description: Declarations for DDR routines and data objects
*
* Author: Julien Margetts
*
* Copyright: Oxford Semiconductor Ltd, 2009
*/
void ddr_oxsemi_setup(int mhz);
/* define to refresh in bursts of 8 */
#define BURST_REFRESH_ENABLE
#define DDR_BASE 0x44700000
#define C_DDR_CFG_REG (DDR_BASE + 0x00)
#define C_CFG_DDR 0x80000000
#define C_CFG_SDR 0x00000000
#define C_CFG_WIDTH8 0x00200000
#define C_CFG_WIDTH16 0x00100000
#define C_CFG_WIDTH32 0x00000000
#define C_CFG_SIZE_FACTOR 0x00020000
#define C_CFG_REFRESH_ENABLE 0x00010000
#define C_CFG_BURST_REFRESH_ENABLE 0x01000000
#define C_CFG_SIZE(x) (x << 17)
#define CFG_SIZE_2MB 1
#define CFG_SIZE_4MB 2
#define CFG_SIZE_8MB 3
#define CFG_SIZE_16MB 4
#define CFG_SIZE_32MB 5
#define CFG_SIZE_64MB 6
#define CFG_SIZE_128MB 7
#define C_DDR_BLKEN_REG (DDR_BASE + 0x04)
#define C_BLKEN_DDR_ON 0x80000000
#define C_DDR_STAT_REG (DDR_BASE + 0x08)
#define C_DDR_CMD_REG (DDR_BASE + 0x0C)
#define C_CMD_SEND_COMMAND (1UL << 31) | (1 << 21) // RAS/CAS/WE/CS all low(active), CKE High, indicates
#define C_CMD_WAKE_UP 0x80FC0000 // Asserts CKE
#define C_CMD_MODE_SDR 0x80200022 // Sets CL=2 BL=4
#define C_CMD_MODE_DDR 0x80200063 // Sets CL=2.5 BL=8
#define C_CMD_RESET_DLL 0x00000100 // A8=1 Use in conjunction with C_CMD_MODE_DDR
#define C_CMD_PRECHARGE_ALL 0x80280400
#define C_CMD_AUTO_REFRESH 0x80240000
#define C_CMD_SELF_REFRESH 0x80040000 // As AUTO-REFRESH but with CKE low
#define C_CMD_NOP 0x803C0000 // NOP just to insert guaranteed delay
#define C_CMD_DDR2_EMR1 0x80210000 // Load extended mode register 1 with zeros (for init), CKE still set
//#define C_CMD_DDR2_EMR1 0x80210400 // Load extended mode register 1 with zeros (for init), CKE still set
#define C_CMD_ENABLE_DLL 0x00000000 // Values used in conjuction with C_CMD_DDR2_EMR1
#define C_CMD_DISABLE_DLL 0x00000001
#define C_CMD_REDUCED_DRIVE 0x00000002
#define C_CMD_ODT_DISABLED 0x00000000
#define C_CMD_ODT_50 0x00000044
#define C_CMD_ODT_75 0x00000004
#define C_CMD_ODT_150 0x00000040
#define C_CMD_MODE_DDR2_OCD_DFLT 0x00000380
#define C_CMD_MODE_DDR2_OCD_EXIT 0x00000000
#define C_CMD_DDR2_EMR2 0x80220000 // Load extended mode register 2 with zeros (for init), CKE still set
#define C_CMD_DDR2_EMR3 0x80230000 // Load extended mode register 3 with zeros (for init), CKE still set
#define C_DDR_AHB_REG (DDR_BASE + 0x10)
#define C_AHB_NO_RCACHES 0xFFFF0000
#define C_AHB_FLUSH_ALL_RCACHES 0x0000FFFF
#define C_AHB_FLUSH_AHB0_RCACHE 0x00000001
#define C_AHB_FLUSH_AHB1_RCACHE 0x00000002
#define C_DDR_DLL_REG (DDR_BASE + 0x14)
#define C_DLL_DISABLED 0x00000000
#define C_DLL_MANUAL 0x80000000
#define C_DLL_AUTO_OFFSET 0xA0000000
#define C_DLL_AUTO_IN_REFRESH 0xC0000000
#define C_DLL_AUTOMATIC 0xE0000000
#define C_DDR_MON_REG (DDR_BASE + 0x18)
#define C_MON_ALL 0x00000010
#define C_MON_CLIENT 0x00000000
#define C_DDR_DIAG_REG (DDR_BASE + 0x1C)
#define C_DDR_DIAG2_REG (DDR_BASE + 0x20)
#define C_DDR_IOC_REG (DDR_BASE + 0x24)
#define C_DDR_IOC_PWR_DWN (1 << 10)
#define C_DDR_IOC_SEL_SSTL (1 << 9)
#define C_DDR_IOC_CK_DRIVE(x) ((x) << 6)
#define C_DDR_IOC_DQ_DRIVE(x) ((x) << 3)
#define C_DDR_IOC_XX_DRIVE(x) ((x) << 0)
#define C_DDR_ARB_REG (DDR_BASE + 0x28)
#define C_DDR_ARB_MIDBUF (1 << 4)
#define C_DDR_ARB_LRUBANK (1 << 3)
#define C_DDR_ARB_REQAGE (1 << 2)
#define C_DDR_ARB_DATDIR (1 << 1)
#define C_DDR_ARB_DATDIR_NC (1 << 0)
#define C_TOP_ADDRESS_BIT_TEST 22
#define C_MEM_BASE C_SDRAM_BASE
#define C_MEM_TEST_BASE 0
#define C_MEM_TEST_LEN 1920
#define C_MAX_RAND_ACCESS_LEN 16
#define C_DDR_REG_IGNORE (DDR_BASE + 0x2C)
#define C_DDR_AHB4_REG (DDR_BASE + 0x44)
#define C_DDR_REG_TIMING0 (DDR_BASE + 0x34)
#define C_DDR_REG_TIMING1 (DDR_BASE + 0x38)
#define C_DDR_REG_TIMING2 (DDR_BASE + 0x3C)
#define C_DDR_REG_PHY0 (DDR_BASE + 0x48)
#define C_DDR_REG_PHY1 (DDR_BASE + 0x4C)
#define C_DDR_REG_PHY2 (DDR_BASE + 0x50)
#define C_DDR_REG_PHY3 (DDR_BASE + 0x54)
#define C_DDR_REG_GENERIC (DDR_BASE + 0x60)
#define C_OXSEMI_DDRC_SIGNATURE 0x054415AA
#define DDR_PHY_BASE (DDR_BASE + 0x80000)
#define DDR_PHY_TIMING (DDR_PHY_BASE + 0x48)
#define DDR_PHY_TIMING_CK (1 << 12)
#define DDR_PHY_TIMING_INC (1 << 13)
#define DDR_PHY_TIMING_W_CE (1 << 14)
#define DDR_PHY_TIMING_W_RST (1 << 15)
#define DDR_PHY_TIMING_I_CE (1 << 16)
#define DDR_PHY_TIMING_I_RST (1 << 17)
#define C_DDR_REG_PHY_TIMING (DDR_PHY_BASE + 0x50)
#define C_DDR_REG_PHY_WR_RATIO (DDR_PHY_BASE + 0x74)
#define C_DDR_REG_PHY_RD_RATIO (DDR_PHY_BASE + 0x78)
#define C_DDR_TRANSACTION_ROUTING (DDR_PHY_BASE + 0xC8)
#define DDR_ROUTE_CPU0_INSTR_SHIFT 0
#define DDR_ROUTE_CPU0_RDDATA_SHIFT 4
#define DDR_ROUTE_CPU0_WRDATA_SHIFT 6
#define DDR_ROUTE_CPU1_INSTR_SHIFT 8
#define DDR_ROUTE_CPU1_RDDATA_SHIFT 12
#define DDR_ROUTE_CPU1_WRDATA_SHIFT 14
unsigned int ddrc_signature(void);
void set_ddr_timing(unsigned int w, unsigned int i);
int pause(unsigned int us);
void set_ddr_sel(int val);

View File

@ -0,0 +1,20 @@
#include <config.h>
#ifndef CONFIG_SPL_BUILD
.globl lowlevel_init
lowlevel_init:
/*
* Copy exception table to relocated address in internal SRAM
*/
ldr r0, src /* Address of exception table in flash */
ldr r1, dest /* Relocated address of exception table */
ldmia r0!, {r3-r10} /* Copy exception table and jump values from */
stmia r1!, {r3-r10} /* FLASH to relocated address */
ldmia r0!, {r3-r10}
stmia r1!, {r3-r10}
mov pc, lr
src: .word CONFIG_SYS_TEXT_BASE
dest: .word CONFIG_SRAM_BASE
#endif

View File

@ -0,0 +1,373 @@
#include <common.h>
#include <spl.h>
#include <phy.h>
#include <netdev.h>
#include <ide.h>
#include <nand.h>
#include <asm/arch/spl.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/clock.h>
#include <asm/arch/sysctl.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_BUILD
#ifdef DEBUG
#define DILIGENCE (1048576/4)
static int test_memory(u32 memory)
{
volatile u32 *read;
volatile u32 *write;
const u32 INIT_PATTERN = 0xAA55AA55;
const u32 INC_PATTERN = 0x01030507;
u32 pattern;
int check;
int i;
check = 0;
read = write = (volatile u32 *) memory;
pattern = INIT_PATTERN;
for (i = 0; i < DILIGENCE; i++) {
*write++ = pattern;
pattern += INC_PATTERN;
}
puts("testing\n");
pattern = INIT_PATTERN;
for (i = 0; i < DILIGENCE; i++) {
check += (pattern == *read++) ? 1 : 0;
pattern += INC_PATTERN;
}
return (check == DILIGENCE) ? 0 : -1;
}
#endif
void uart_init(void)
{
/* Reset UART1 */
reset_block(SYS_CTRL_RST_UART1, 1);
udelay(100);
reset_block(SYS_CTRL_RST_UART1, 0);
udelay(100);
/* Setup pin mux'ing for UART1 */
pinmux_set(PINMUX_BANK_MFA, 30, PINMUX_UARTA_SIN);
pinmux_set(PINMUX_BANK_MFA, 31, PINMUX_UARTA_SOUT);
}
extern void init_ddr(int mhz);
void board_inithw(void)
{
int plla_freq;
#ifdef DEBUG
int i;
#endif /* DEBUG */
timer_init();
uart_init();
preloader_console_init();
plla_freq = plla_set_config(CONFIG_PLLA_FREQ_MHZ);
init_ddr(plla_freq);
#ifdef DEBUG
if(test_memory(CONFIG_SYS_SDRAM_BASE)) {
puts("memory test failed\n");
} else {
puts("memory test done\n");
}
#endif /* DEBUG */
#ifdef CONFIG_SPL_BSS_DRAM_START
extern char __bss_dram_start[];
extern char __bss_dram_end[];
memset(&__bss_dram_start, 0, __bss_dram_end - __bss_dram_start);
#endif
}
void board_init_f(ulong dummy)
{
/* Set the stack pointer. */
asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK));
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
/* Set global data pointer. */
gd = &gdata;
board_inithw();
board_init_r(NULL, 0);
}
u32 spl_boot_device(void)
{
return CONFIG_SPL_BOOT_DEVICE;
}
#ifdef CONFIG_SPL_BLOCK_SUPPORT
void spl_block_device_init(void)
{
ide_init();
}
#endif
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
/* break into full u-boot on 'c' */
return (serial_tstc() && serial_getc() == 'c');
}
#endif
void spl_display_print(void)
{
/* print a hint, so that we will not use the wrong SPL by mistake */
puts(" Boot device: " BOOT_DEVICE_TYPE "\n" );
}
void lowlevel_init(void)
{
}
#ifdef USE_DL_PREFIX
/* quick and dirty memory allocation */
static ulong next_mem = CONFIG_SPL_MALLOC_START;
void *memalign(size_t alignment, size_t bytes)
{
ulong mem = ALIGN(next_mem, alignment);
next_mem = mem + bytes;
if (next_mem > CONFIG_SYS_SDRAM_BASE + CONFIG_MIN_SDRAM_SIZE) {
printf("spl: out of memory\n");
hang();
}
return (void *)mem;
}
void free(void* mem)
{
}
#endif
#endif /* CONFIG_SPL_BUILD */
int board_early_init_f(void)
{
return 0;
}
#define STATIC_CTL_BANK0 (STATIC_CONTROL_BASE + 4)
#define STATIC_READ_CYCLE_SHIFT 0
#define STATIC_DELAYED_OE (1 << 7)
#define STATIC_WRITE_CYCLE_SHIFT 8
#define STATIC_WRITE_PULSE_SHIFT 16
#define STATIC_WRITE_BURST_EN (1 << 23)
#define STATIC_TURN_AROUND_SHIFT 24
#define STATIC_BUFFER_PRESENT (1 << 28)
#define STATIC_READ_BURST_EN (1 << 29)
#define STATIC_BUS_WIDTH8 (0 << 30)
#define STATIC_BUS_WIDTH16 (1 << 30)
#define STATIC_BUS_WIDTH32 (2 << 30)
void nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
if (ctrl & NAND_CTRL_CHANGE) {
nandaddr &= ~(BIT(NAND_ALE_ADDR_PIN) | BIT(NAND_CLE_ADDR_PIN));
if (ctrl & NAND_CLE)
nandaddr |= BIT(NAND_CLE_ADDR_PIN);
else if (ctrl & NAND_ALE)
nandaddr |= BIT(NAND_ALE_ADDR_PIN);
this->IO_ADDR_W = (void __iomem *) nandaddr;
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, (void __iomem *) nandaddr);
}
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_BOOT_FROM_NAND)
int nand_dev_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
udelay(chip->chip_delay);
return 1;
}
void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
struct nand_chip *chip = mtd->priv;
for (i = 0; i < len; i++)
buf[i] = readb(chip->IO_ADDR_R);
}
void nand_dev_reset(struct nand_chip *chip)
{
writeb(NAND_CMD_RESET, chip->IO_ADDR_W + BIT(NAND_CLE_ADDR_PIN));
udelay(chip->chip_delay);
writeb(NAND_CMD_STATUS, chip->IO_ADDR_W + BIT(NAND_CLE_ADDR_PIN));
while (!(readb(chip->IO_ADDR_R) & NAND_STATUS_READY)) {
;
}
}
#else
#define nand_dev_reset(chip) /* framework will reset the chip anyway */
#define nand_read_buf NULL /* framework will provide a default one */
#define nand_dev_ready NULL /* dev_ready is optional */
#endif
int board_nand_init(struct nand_chip *chip)
{
/* Block reset Static core */
reset_block(SYS_CTRL_RST_STATIC, 1);
reset_block(SYS_CTRL_RST_STATIC, 0);
/* Enable clock to Static core */
enable_clock(SYS_CTRL_CLK_STATIC);
/* enable flash support on static bus.
* Enable static bus onto GPIOs, only CS0 */
pinmux_set(PINMUX_BANK_MFA, 12, PINMUX_STATIC_DATA0);
pinmux_set(PINMUX_BANK_MFA, 13, PINMUX_STATIC_DATA1);
pinmux_set(PINMUX_BANK_MFA, 14, PINMUX_STATIC_DATA2);
pinmux_set(PINMUX_BANK_MFA, 15, PINMUX_STATIC_DATA3);
pinmux_set(PINMUX_BANK_MFA, 16, PINMUX_STATIC_DATA4);
pinmux_set(PINMUX_BANK_MFA, 17, PINMUX_STATIC_DATA5);
pinmux_set(PINMUX_BANK_MFA, 18, PINMUX_STATIC_DATA6);
pinmux_set(PINMUX_BANK_MFA, 19, PINMUX_STATIC_DATA7);
pinmux_set(PINMUX_BANK_MFA, 20, PINMUX_STATIC_NWE);
pinmux_set(PINMUX_BANK_MFA, 21, PINMUX_STATIC_NOE);
pinmux_set(PINMUX_BANK_MFA, 22, PINMUX_STATIC_NCS);
pinmux_set(PINMUX_BANK_MFA, 23, PINMUX_STATIC_ADDR18);
pinmux_set(PINMUX_BANK_MFA, 24, PINMUX_STATIC_ADDR19);
/* Setup the static bus CS0 to access FLASH */
writel((0x3f << STATIC_READ_CYCLE_SHIFT)
| (0x3f << STATIC_WRITE_CYCLE_SHIFT)
| (0x1f << STATIC_WRITE_PULSE_SHIFT)
| (0x03 << STATIC_TURN_AROUND_SHIFT) |
STATIC_BUS_WIDTH16,
STATIC_CTL_BANK0);
chip->cmd_ctrl = nand_hwcontrol;
chip->ecc.mode = NAND_ECC_SOFT;
chip->chip_delay = 30;
chip->dev_ready = nand_dev_ready;
chip->read_buf = nand_read_buf;
nand_dev_reset(chip);
return 0;
}
int board_init(void)
{
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
/* assume uart is already initialized by SPL */
#if defined(CONFIG_START_IDE)
puts("IDE: ");
ide_init();
#endif
return 0;
}
/* copied from board/evb64260/sdram_init.c */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
static long int dram_size (long int *base, long int maxsize)
{
volatile long int *addr, *b = base;
long int cnt, val, save1, save2;
#define STARTVAL (CONFIG_MIN_SDRAM_SIZE / 2) /* start test at half size */
for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
cnt <<= 1) {
addr = base + cnt; /* pointer arith! */
save1 = *addr; /* save contents of addr */
save2 = *b; /* save contents of base */
*addr = cnt; /* write cnt to addr */
*b = 0; /* put null at base */
/* check at base address */
if ((*b) != 0) {
*addr = save1; /* restore *addr */
*b = save2; /* restore *b */
return (0);
}
val = *addr; /* read *addr */
*addr = save1;
*b = save2;
if (val != cnt) {
/* fix boundary condition.. STARTVAL means zero */
if (cnt == STARTVAL / sizeof (long))
cnt = 0;
return (cnt * sizeof (long));
}
}
return maxsize;
}
int dram_init(void)
{
gd->ram_size = dram_size((long int *)CONFIG_SYS_SDRAM_BASE,
CONFIG_MAX_SDRAM_SIZE);
return 0;
}
int board_eth_init(bd_t *bis)
{
u32 value;
/* set the pin multiplexers to enable talking to Ethernent Phys */
pinmux_set(PINMUX_BANK_MFA, 3, PINMUX_MACA_MDC);
pinmux_set(PINMUX_BANK_MFA, 4, PINMUX_MACA_MDIO);
// Ensure the MAC block is properly reset
reset_block(SYS_CTRL_RST_MAC, 1);
udelay(10);
reset_block(SYS_CTRL_RST_MAC, 0);
// Enable the clock to the MAC block
enable_clock(SYS_CTRL_CLK_MAC);
value = readl(SYS_CTRL_GMAC_CTRL);
/* Use simple mux for 25/125 Mhz clock switching */
value |= BIT(SYS_CTRL_GMAC_SIMPLE_MUX);
/* Enable GMII_GTXCLK to follow GMII_REFCLK - required for gigabit PHY */
value |= BIT(SYS_CTRL_GMAC_CKEN_GTX);
/* set auto tx speed */
value |= BIT(SYS_CTRL_GMAC_AUTOSPEED);
writel(value, SYS_CTRL_GMAC_CTRL);
return designware_initialize(MAC_BASE, PHY_INTERFACE_MODE_RGMII);
}

View File

@ -0,0 +1,21 @@
.section .init
.globl _spl_start
_spl_start:
b _start
b _start+0x4
b _start+0x8
b _start+0xc
b _start+0x10
b _start+0x14
b _start+0x18
b _start+0x1c
.space 0x30 - (. - _spl_start)
.ascii "BOOT" /* 0x30 signature*/
.word 0x50 /* 0x34 header size itself */
.word 0 /* 0x38 */
.word 0x5000f000 /* boot report location */
.word _start /* 0x40 */
main_crc_size: .word code_size /* 0x44 filled by linker */
main_crc: .word 0 /* 0x48 fill later */
header_crc: .word 0 /* 0x4C header crc*/

View File

@ -0,0 +1,101 @@
/*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
* January 2004 - Changed to support H4 device
* Copyright (c) 2004-2008 Texas Instruments
*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
MEMORY
{
sram (rwx) : ORIGIN = CONFIG_SPL_TEXT_BASE, LENGTH = CONFIG_SPL_MAX_SIZE
dram : ORIGIN = CONFIG_SPL_BSS_DRAM_START, LENGTH = CONFIG_SPL_BSS_DRAM_SIZE
}
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_spl_start)
SECTIONS
{
.text.0 :
{
*(.init*)
}
/* Start of the rest of the SPL */
code_start = . ;
.text.1 :
{
*(.text*)
}
. = ALIGN(4);
.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
. = ALIGN(4);
.data : {
*(.data*)
}
. = ALIGN(4);
__image_copy_end = .;
code_size = . - code_start;
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
__rel_dyn_end = .;
}
. = ALIGN(0x800);
_end = .;
.bss.sram __rel_dyn_start (OVERLAY) : {
__bss_start = .;
*(.bss.stdio_devices)
*(.bss.serial_current)
. = ALIGN(4);
__bss_end = .;
}
.bss : {
__bss_dram_start = .;
*(.bss*)
__bss_dram_end = .;
} > dram
/DISCARD/ : { *(.bss*) }
/DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynsym*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.hash*) }
/DISCARD/ : { *(.plt*) }
/DISCARD/ : { *(.interp*) }
/DISCARD/ : { *(.gnu*) }
}

View File

@ -0,0 +1,116 @@
/*
* (c) Copyright 2011 by Tigris Elektronik GmbH
*
* Author:
* Maximilian Schwerin <mvs@tigris.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <environment.h>
#include <linux/stddef.h>
#include <malloc.h>
#include <search.h>
#include <errno.h>
#include <ext4fs.h>
char *env_name_spec = "EXT4";
env_t *env_ptr;
DECLARE_GLOBAL_DATA_PTR;
int env_init(void)
{
/* use default */
gd->env_addr = (ulong)&default_environment[0];
gd->env_valid = 1;
return 0;
}
#ifdef CONFIG_CMD_SAVEENV
int saveenv(void)
{
env_t env_new;
ssize_t len;
char *res;
block_dev_desc_t *dev_desc = NULL;
int dev = EXT4_ENV_DEVICE;
int part = EXT4_ENV_PART;
int err;
res = (char *)&env_new.data;
len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL);
if (len < 0) {
error("Cannot export environment: errno = %d\n", errno);
return 1;
}
dev_desc = get_dev(EXT4_ENV_INTERFACE, dev);
if (dev_desc == NULL) {
printf("Failed to find %s%d\n",
EXT4_ENV_INTERFACE, dev);
return 1;
}
err = ext4_register_device(dev_desc, part);
if (err) {
printf("Failed to register %s%d:%d\n",
EXT4_ENV_INTERFACE, dev, part);
return 1;
}
env_new.crc = crc32(0, env_new.data, ENV_SIZE);
err = ext4fs_write(EXT4_ENV_FILE, (void *)&env_new, sizeof(env_t));
ext4fs_close();
if (err == -1) {
printf("\n** Unable to write \"%s\" from %s%d:%d **\n",
EXT4_ENV_FILE, EXT4_ENV_INTERFACE, dev, part);
return 1;
}
puts("done\n");
return 0;
}
#endif /* CONFIG_CMD_SAVEENV */
void env_relocate_spec(void)
{
char buf[CONFIG_ENV_SIZE];
block_dev_desc_t *dev_desc = NULL;
int dev = EXT4_ENV_DEVICE;
int part = EXT4_ENV_PART;
int err;
dev_desc = get_dev(EXT4_ENV_INTERFACE, dev);
if (dev_desc == NULL) {
printf("Failed to find %s%d\n",
EXT4_ENV_INTERFACE, dev);
set_default_env(NULL);
return;
}
err = ext4_register_device(dev_desc, part);
if (err) {
printf("Failed to register %s%d:%d\n",
EXT4_ENV_INTERFACE, dev, part);
set_default_env(NULL);
return;
}
err = ext4_read_file(EXT4_ENV_FILE, (uchar *)&buf, 0, CONFIG_ENV_SIZE);
ext4fs_close();
if (err == -1) {
printf("\n** Unable to read \"%s\" from %s%d:%d **\n",
EXT4_ENV_FILE, EXT4_ENV_INTERFACE, dev, part);
set_default_env(NULL);
return;
}
env_import(buf, 1);
}

View File

@ -0,0 +1,236 @@
/*
* (C) Copyright 2013
*
* Ma Haijun <mahaijuns@gmail.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <spl.h>
#include <asm/u-boot.h>
#include <asm/utils.h>
#include <version.h>
#include <part.h>
#include <fat.h>
#include <ext4fs.h>
/* should be implemented by board */
extern void spl_block_device_init(void);
block_dev_desc_t * spl_get_block_device(void)
{
block_dev_desc_t * device;
spl_block_device_init();
device = get_dev(CONFIG_SPL_BLOCKDEV_INTERFACE, CONFIG_SPL_BLOCKDEV_ID);
if (!device) {
printf("blk device %s%d not exists\n",
CONFIG_SPL_BLOCKDEV_INTERFACE,
CONFIG_SPL_BLOCKDEV_ID);
hang();
}
return device;
}
#ifdef CONFIG_SPL_FAT_SUPPORT
static int block_load_image_fat(const char *filename)
{
int err;
struct image_header *header;
header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
sizeof(struct image_header));
err = file_fat_read(filename, header, sizeof(struct image_header));
if (err <= 0)
goto end;
spl_parse_image_header(header);
err = file_fat_read(filename, (u8 *)spl_image.load_addr, 0);
end:
if (err <= 0)
printf("spl: error reading image %s, err - %d\n",
filename, err);
return (err <= 0);
}
#ifdef CONFIG_SPL_OS_BOOT
static int block_load_image_fat_os(void)
{
int err;
err = file_fat_read(CONFIG_SPL_FAT_LOAD_ARGS_NAME,
(void *)CONFIG_SYS_SPL_ARGS_ADDR, 0);
if (err <= 0) {
return -1;
}
return block_load_image_fat(CONFIG_SPL_FAT_LOAD_KERNEL_NAME);
}
#endif
void spl_block_load_image(void)
{
int err;
block_dev_desc_t * device;
device = spl_get_block_device();
err = fat_register_device(device, CONFIG_BLOCKDEV_FAT_BOOT_PARTITION);
if (err) {
printf("spl: fat register err - %d\n", err);
hang();
}
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || block_load_image_fat_os())
#endif
{
err = block_load_image_fat(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
if (err)
hang();
}
}
#elif defined(CONFIG_SPL_EXT4_SUPPORT) /* end CONFIG_SPL_FAT_SUPPORT */
static int block_load_image_ext4(const char *filename)
{
int err;
struct image_header *header;
header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
sizeof(struct image_header));
err = ext4_read_file(filename, header, 0, sizeof(struct image_header));
if (err <= 0)
goto end;
spl_parse_image_header(header);
err = ext4_read_file(filename, (u8 *)spl_image.load_addr, 0, 0);
end:
return (err <= 0);
}
#ifdef CONFIG_SPL_OS_BOOT
static int block_load_image_ext4_os(void)
{
int err;
err = ext4_read_file(CONFIG_SPL_EXT4_LOAD_ARGS_NAME,
(void *)CONFIG_SYS_SPL_ARGS_ADDR, 0, 0);
if (err <= 0) {
return -1;
}
return block_load_image_ext4(CONFIG_SPL_EXT4_LOAD_KERNEL_NAME);
}
#endif
void spl_block_load_image(void)
{
int err;
block_dev_desc_t * device;
device = spl_get_block_device();
err = ext4_register_device(device, CONFIG_BLOCKDEV_EXT4_BOOT_PARTITION);
if (err) {
hang();
}
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || block_load_image_ext4_os())
#endif
{
err = block_load_image_ext4(CONFIG_SPL_EXT4_LOAD_PAYLOAD_NAME);
if (err)
hang();
}
}
#else /* end CONFIG_SPL_EXT4_SUPPORT */
static int block_load_image_raw(block_dev_desc_t * device, lbaint_t sector)
{
int n;
u32 image_size_sectors;
struct image_header *header;
header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
sizeof(struct image_header));
/* read image header to find the image size & load address */
n = device->block_read(device->dev, sector, 1, header);
if (n != 1) {
printf("spl: blk read err\n");
return 1;
}
spl_parse_image_header(header);
/* convert size to sectors - round up */
image_size_sectors = (spl_image.size + 512 - 1) / 512;
n = device->block_read(device->dev, sector, image_size_sectors,
(void *)spl_image.load_addr);
if (n != image_size_sectors) {
printf("spl: blk read err\n");
return 1;
}
return 0;
}
#ifdef CONFIG_SPL_OS_BOOT
static int block_load_image_raw_os(block_dev_desc_t * device)
{
int n;
n = device->block_read(device->dev, CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTOR,
CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS,
(u32 *)CONFIG_SYS_SPL_ARGS_ADDR);
/* flush cache after read */
flush_cache(addr, CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS * 512);
if (n != CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS) {
printf("args blk read error\n");
return -1;
}
return block_load_image_raw(device, CONFIG_SYS_BLOCK_RAW_MODE_KERNEL_SECTOR);
}
#endif
void spl_block_load_image(void)
{
int err;
block_dev_desc_t * device;
device = spl_get_block_device();
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || block_load_image_raw_os(device))
#endif
{
err = block_load_image_raw(device,
CONFIG_SYS_BLOCK_RAW_MODE_U_BOOT_SECTOR);
if (err)
hang();
}
}
#endif /* CONFIG_SPL_FAT_SUPPORT */

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,105 @@
/*
* drivers/usb/host/ehci-oxnas.c
*
* Tzachi Perelstein <tzachi@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <common.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sysctl.h>
#include <asm/arch/clock.h>
#include "ehci.h"
static struct ehci_hcor *ghcor;
static int start_oxnas_usb_ehci(void)
{
#ifdef CONFIG_USB_PLLB_CLK
reset_block(SYS_CTRL_RST_PLLB, 0);
enable_clock(SYS_CTRL_CLK_REF600);
writel((1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV),
SEC_CTRL_PLLB_CTRL0);
/* 600MHz pllb divider for 12MHz */
writel(PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0), SEC_CTRL_PLLB_DIV_CTRL);
#else
/* ref 300 divider for 12MHz */
writel(REF300_DIV_INT(25) | REF300_DIV_FRAC(0), SYS_CTRL_REF300_DIV);
#endif
/* Ensure the USB block is properly reset */
reset_block(SYS_CTRL_RST_USBHS, 1);
reset_block(SYS_CTRL_RST_USBHS, 0);
reset_block(SYS_CTRL_RST_USBHSPHYA, 1);
reset_block(SYS_CTRL_RST_USBHSPHYA, 0);
reset_block(SYS_CTRL_RST_USBHSPHYB, 1);
reset_block(SYS_CTRL_RST_USBHSPHYB, 0);
/* Force the high speed clock to be generated all the time, via serial
programming of the USB HS PHY */
writel((2UL << USBHSPHY_TEST_ADD) |
(0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
writel((1UL << USBHSPHY_TEST_CLK) |
(2UL << USBHSPHY_TEST_ADD) |
(0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
writel((0xfUL << USBHSPHY_TEST_ADD) |
(0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
writel((1UL << USBHSPHY_TEST_CLK) |
(0xfUL << USBHSPHY_TEST_ADD) |
(0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
#ifdef CONFIG_USB_PLLB_CLK /* use pllb clock */
writel(USB_CLK_INTERNAL | USB_INT_CLK_PLLB, SYS_CTRL_USB_CTRL);
#else /* use ref300 derived clock */
writel(USB_CLK_INTERNAL | USB_INT_CLK_REF300, SYS_CTRL_USB_CTRL);
#endif
/* Enable the clock to the USB block */
enable_clock(SYS_CTRL_CLK_USBHS);
return 0;
}
int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
struct ehci_hcor **hcor)
{
start_oxnas_usb_ehci();
*hccr = (struct ehci_hccr *)(USB_HOST_BASE + 0x100);
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
ghcor = *hcor;
return 0;
}
int ehci_hcd_stop(int index)
{
reset_block(SYS_CTRL_RST_USBHS, 1);
disable_clock(SYS_CTRL_CLK_USBHS);
return 0;
}
extern void __ehci_set_usbmode(int index);
void ehci_set_usbmode(int index)
{
#define or_txttfill_tuning _reserved_1_[0]
u32 tmp;
__ehci_set_usbmode(index);
tmp = ehci_readl(&ghcor->or_txfilltuning);
tmp &= ~0x00ff0000;
tmp |= 0x003f0000; /* set burst pre load count to 0x40 (63 * 4 bytes) */
tmp |= 0x16; /* set sheduler overhead to 22 * 1.267us (HS) or 22 * 6.33us (FS/LS)*/
ehci_writel(&ghcor->or_txfilltuning, tmp);
tmp = ehci_readl(&ghcor->or_txttfill_tuning);
tmp |= 0x2; /* set sheduler overhead to 2 * 6.333us */
ehci_writel(&ghcor->or_txttfill_tuning, tmp);
}

View File

@ -0,0 +1,381 @@
#ifndef __CONFIG_H
#define __CONFIG_H
/* High Level Configuration Options */
#define CONFIG_ARM1136
#define CONFIG_OX820
#include <asm/arch/cpu.h> /* get chip and board defs */
/* make cmd_ide.c quiet when compile */
#define __io
/*#define CONFIG_ARCH_CPU_INIT*/
/*#define CONFIG_DISPLAY_CPUINFO*/
/*#define CONFIG_DISPLAY_BOARDINFO*/
/*#define CONFIG_BOARD_EARLY_INIT_F*/
/*#define CONFIG_SKIP_LOWLEVEL_INIT*/
/* mem */
#define CONFIG_SYS_SDRAM_BASE 0x60000000
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_MIN_SDRAM_SIZE (128 * 1024 * 1024) /* 128 MB */
#define CONFIG_MAX_SDRAM_SIZE (512 * 1024 * 1024) /* 512 MB */
#define CONFIG_SRAM_BASE 0x50000000
#define CONFIG_SRAM_SIZE (64 * 1024)
/* need do dma so better keep dcache off */
#define CONFIG_SYS_DCACHE_OFF
/* clock */
#define CONFIG_PLLA_FREQ_MHZ 800
#define CONFIG_RPSCLK 6250000
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CLK_FREQ CONFIG_RPSCLK
#define CONFIG_SYS_TIMERBASE TIMER1_BASE
#define CONFIG_TIMER_PRESCALE TIMER_PRESCALE_16
/* serial */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_CLK CONFIG_RPSCLK
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_NS16550_COM1 UART_1_BASE
#define CONFIG_CONS_INDEX 1
/* ide */
#define CONFIG_SYS_ATA_BASE_ADDR 0
#define CONFIG_SYS_ATA_DATA_OFFSET 0
#define CONFIG_SYS_ATA_REG_OFFSET 0
#define CONFIG_SYS_ATA_ALT_OFFSET 0
#define CONFIG_IDE_PLX
#define CONFIG_SYS_IDE_MAXDEVICE 1
#define CONFIG_SYS_IDE_MAXBUS 1
#define CONFIG_IDE_PREINIT
#define CONFIG_LBA48
/* nand */
#define CONFIG_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE STATIC_CS0_BASE
#define NAND_CLE_ADDR_PIN 19
#define NAND_ALE_ADDR_PIN 18
#define MTDPARTS_DEFAULT "mtdparts=41000000.nand:" \
"14m(boot)," \
"-(ubi)"
#define MTDIDS_DEFAULT "nand0=41000000.nand"
#define UBIPART_DEFAULT "ubi"
/* net */
#define CONFIG_DESIGNWARE_ETH
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_MII
#define CONFIG_CMD_MII
#define CONFIG_PHYLIB
#define CONFIG_PHY_REALTEK
/* spl */
#ifdef CONFIG_SPL_BUILD
#define USE_DL_PREFIX /* rename malloc free etc, so we can override them */
#endif
#if defined(CONFIG_BOOT_FROM_NAND) || defined(CONFIG_BOOT_FROM_SATA)
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_TEXT_BASE 0x50000000
#define CONFIG_SPL_STACK (CONFIG_SRAM_BASE + (48 * 1024))
#define CONFIG_SPL_DISPLAY_PRINT
#define CONFIG_SPL_BSS_DRAM_START 0x65000000
#define CONFIG_SPL_BSS_DRAM_SIZE 0x01000000
#define CONFIG_SPL_MALLOC_START 0x66000000
#endif
#if defined(CONFIG_BOOT_FROM_NAND)
#define CONFIG_SPL_NAND_SUPPORT
#define BOOT_DEVICE_TYPE "NAND"
#define BOOT_DEVICE_NAND 0xfeedbacc
#define CONFIG_SPL_BOOT_DEVICE BOOT_DEVICE_NAND
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_NAND_ECC
#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 6
#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \
48, 49, 50, 51, 52, 53, 54, 55, \
56, 57, 58, 59, 60, 61, 62, 63}
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
/* pages per erase block */
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE)
/* nand spl use 1 erase block, and use bit to byte encode for reliability */
#define CONFIG_SPL_MAX_SIZE (128 * 1024 / 8)
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00040000
/* spl kernel load is not enabled */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000
#define CONFIG_CMD_SPL_NAND_OFS 0
#define CONFIG_CMD_SPL_WRITE_SIZE 1024
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
/* CONFIG_BOOT_FROM_NAND end */
#elif defined(CONFIG_BOOT_FROM_SATA)
#define CONFIG_SPL_BLOCK_SUPPORT
#define BOOT_DEVICE_TYPE "SATA"
#define BOOT_DEVICE_BLOCK 860202
#define CONFIG_SPL_BOOT_DEVICE BOOT_DEVICE_BLOCK
#define CONFIG_SPL_MAX_SIZE (36 * 1024)
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_BLOCKDEV_INTERFACE "ide"
#define CONFIG_SPL_BLOCKDEV_ID 0
#ifdef CONFIG_BOOT_FROM_FAT /* u-boot in fat partition */
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_BLOCKDEV_FAT_BOOT_PARTITION 1 /* first partition */
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" /* u-boot file name */
/* enable U-Boot Falcon Mode */
#define CONFIG_CMD_SPL
#define CONFIG_SPL_OS_BOOT
#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "bootargs.bin" /* boot parameters */
#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "falcon.img" /* kernel */
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
#elif CONFIG_BOOT_FROM_EXT4
#define CONFIG_SPL_EXT4_SUPPORT
#define CONFIG_BLOCKDEV_EXT4_BOOT_PARTITION 1 /* first partition */
#define CONFIG_SPL_EXT4_LOAD_PAYLOAD_NAME "/boot/u-boot.img" /* u-boot file name */
/* enable U-Boot Falcon Mode */
#define CONFIG_CMD_SPL
#define CONFIG_SPL_OS_BOOT
#define CONFIG_SPL_EXT4_LOAD_ARGS_NAME "/boot/bootargs.bin" /* boot parameters */
#define CONFIG_SPL_EXT4_LOAD_KERNEL_NAME "/boot/falcon.img" /* kernel */
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
#else /* u-boot in raw sectors */
#define CONFIG_SYS_BLOCK_RAW_MODE_U_BOOT_SECTOR 1024
/* spl kernel load is not enabled */
#define CONFIG_SYS_BLOCK_RAW_MODE_KERNEL_SECTOR 4096
#define CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTOR 0
#define CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS (1024 / 512)
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
#endif /* CONFIG_BOOT_FROM_FAT */
/* CONFIG_BOOT_FROM_SATA end */
#else
/* generic, no spl support */
#endif
/* boot */
#define CONFIG_IDENT_STRING " for OXNAS"
#define CONFIG_MACH_TYPE MACH_TYPE_OXNAS
#ifndef CONFIG_SPL_BUILD
/* Enable devicetree support */
#define CONFIG_OF_LIBFDT
#endif
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
#define CONFIG_BOOTDELAY 1
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_DEFAULT_CONSOLE_PARM "console=ttyS0,115200n8 earlyprintk=serial"
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* memtest works on */
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE)
#define CONFIG_SYS_AUTOLOAD "no"
#define CONFIG_DEFAULT_CONSOLE CONFIG_DEFAULT_CONSOLE_PARM "\0"
#define CONFIG_BOOTARGS CONFIG_DEFAULT_CONSOLE_PARM
#define CONFIG_BOOTCOMMAND "run nandboot"
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_RESET_TO_RETRY 60
#define CONFIG_NETCONSOLE
#define CONFIG_IPADDR 192.168.50.100
#define CONFIG_SERVERIP 192.168.50.59
/* A sane default configuration...
* When booting without a valid environment in ubi, first to loading and booting
* the kernel image directly above U-Boot, maybe both were loaded there by
* another bootloader.
* Also use that same offset (0x90000) to load the rescue image later on (by
* adding it onto the flash address where U-Boot is supposed to be stored by
* the legacy loader, 0x440000, resulting in offset 0x4d0000 on the flash).
* When coming up with a valid environment in ubi, first try to load the
* kernel from a ubi volume kernel, if that fails, fallback to the rescue
* image stored in boot partition. As a last resort try booting via
* DHCP/TFTP.
* In case there is no valid environment, first probe for a uimage in ram left
* behind by the first bootloader on a tftp boot.
* If that fails, switch to normal boot order and save environment.
* The loader is supposed to be written to flash at offset 0x440000 and loaded to
* RAM at 0x64000000
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"load_kernel_ubi=ubi readvol 0x62000000 kernel;\0" \
"load_kernel_rescue=nand read 0x62000000 0x4e0000 0x400000;\0" \
"load_kernel_dhcp=dhcp 0x62000000 oxnas-rescue.bin;\0" \
"boot_kernel=bootm 0x62000000;\0" \
"boot_ubi=run load_kernel_ubi && run boot_kernel;\0" \
"boot_rescue=run load_kernel_rescue && run boot_kernel;\0" \
"boot_dhcp=run load_kernel_dhcp && run boot_kernel;\0" \
"normalboot=run boot_ubi; run boot_rescue; run boot_dhcp;\0" \
"firstboot=bootm 0x640a0000; setenv bootcmd run normalboot; " \
"setenv firstboot; saveenv; run bootcmd; \0" \
"bootcmd=run firstboot; \0" \
"console=" CONFIG_DEFAULT_CONSOLE \
"bootargs=" CONFIG_BOOTARGS "\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
/* env */
#if defined(CONFIG_BOOT_FROM_NAND)
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET 0x000C0000
#define CONFIG_ENV_SIZE 0x00020000
#define CONFIG_ENV_OFFSET_REDUND 0x00100000
#define CONFIG_ENV_SIZE_REDUND 0x00020000
#define CONFIG_ENV_RANGE (CONFIG_ENV_SIZE * 2)
/* CONFIG_BOOT_FROM_NAND end */
#elif defined(CONFIG_BOOT_FROM_SATA)
#ifdef CONFIG_BOOT_FROM_EXT4
#define CONFIG_ENV_IS_IN_EXT4
#define CONFIG_START_IDE
#define EXT4_ENV_INTERFACE "ide"
#define EXT4_ENV_DEVICE 0
#define EXT4_ENV_PART 1
#define EXT4_ENV_FILE "/boot/u-boot.env"
#define CONFIG_ENV_SIZE (16 * 1024)
#else
#define CONFIG_ENV_IS_IN_FAT
#define CONFIG_START_IDE
#define FAT_ENV_INTERFACE "ide"
#define FAT_ENV_DEVICE 0
#define FAT_ENV_PART 1
#define FAT_ENV_FILE "u-boot.env"
#define CONFIG_ENV_SIZE (16 * 1024)
#endif
/* CONFIG_BOOT_FROM_SATA end */
#elif defined(CONFIG_BOOT_FROM_SATA)
#else
/* generic */
#define CONFIG_ENV_IS_IN_UBI 1
#define CONFIG_ENV_UBI_PART UBIPART_DEFAULT
#define CONFIG_ENV_UBI_VOLUME "ubootenv"
#define CONFIG_ENV_UBI_VOLUME_REDUND "ubootenv2"
#define CONFIG_ENV_SIZE (16 * 1024)
#endif
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_TEXT_BASE 0x64000000
#define CONFIG_SYS_INIT_SP_ADDR 0x65000000
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "OX820 # "
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size*/
#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
/* usb */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_USB_EHCI
#define CONFIG_EHCI_IS_TDI
/* #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x3F */
#define CONFIG_USB_PLLB_CLK
#define CONFIG_USB_EHCI_OXNAS
#ifndef CONFIG_SPL_BUILD
#define CONFIG_USB_STORAGE
#endif
#define CONFIG_CMD_USB
/* cmds */
#define CONFIG_SYS_NO_FLASH
#include <config_cmd_default.h>
#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_ENV_FLAGS
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_PXE
#define CONFIG_CMD_NAND
#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_CMD_IDE
#define CONFIG_CMD_FAT
#define CONFIG_FAT_WRITE
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#ifndef CONFIG_SPL_BUILD
#define CONFIG_CMD_EXT4_WRITE
#endif
#define CONFIG_CMD_ZIP
#define CONFIG_CMD_UNZIP
#define CONFIG_CMD_TIME
#define CONFIG_CMD_TERMINAL
#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_MD5SUM
#define CONFIG_CMD_HASH
#define CONFIG_CMD_INI
#define CONFIG_CMD_GETTIME
#define CONFIG_CMD_BOOTMENU
#define CONFIG_CMD_ELF
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
/* for CONFIG_CMD_MTDPARTS */
#define CONFIG_MTD_DEVICE
/* for CONFIG_CMD_UBI */
#define CONFIG_MTD_PARTITIONS
/* for CONFIG_CMD_UBI */
#define CONFIG_RBTREE
/* optional, for CONFIG_CMD_BOOTM & required by CONFIG_CMD_UBIFS */
#define CONFIG_LZO
#define CONFIG_LZMA
#define CONFIG_BZIP2
/* for CONFIG_CMD_ZIP */
#define CONFIG_GZIP_COMPRESSED
/* for CONFIG_CMD_MD5SUM */
#define CONFIG_MD5
#define CONFIG_MD5SUM_VERIFY
/* enable CONFIG_CMD_HASH's verification feature */
#define CONFIG_HASH_VERIFY
#define CONFIG_REGEX
/* for CONFIG_CMD_BOOTMENU & CONFIG_CMD_PXE */
#define CONFIG_MENU
/* for new FIT uImage format generated in OpenWrt */
#define CONFIG_FIT
#endif /* __CONFIG_H */

View File

@ -0,0 +1,123 @@
/* J J Larworthy 27 September 2006 */
/* file to read the boot sector of a dis and the loaded image and report
* if the boot rom would accept the data as intact and suitable for use
*/
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/errno.h>
#include <fcntl.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <assert.h>
extern uint32_t crc32(uint32_t, const unsigned char *, unsigned int);
#define NUMBER_VECTORS 12
struct {
unsigned int start_vector[NUMBER_VECTORS];
char code[4];
unsigned int header_length;
unsigned int reserved[3];
unsigned int length;
unsigned int img_CRC;
unsigned int CRC;
} img_header;
void print_usage(void)
{
printf("update_header file.bin\n");
}
void print_header(void)
{
int i;
printf("vectors in header\n");
for (i = 0; i < NUMBER_VECTORS; i++) {
printf("%d:0x%08x\n", i, img_header.start_vector[i]);
}
printf("length:%8x\nimg_CRC:0x%08x\nHeader CRC:0x%08x\n",
img_header.length, img_header.img_CRC, img_header.CRC);
}
int main(int argc, char **argv)
{
int in_file;
int status;
int unsigned crc;
int file_length;
int len;
struct stat file_stat;
void *executable;
in_file = open(argv[1], O_RDWR);
if (in_file < 0) {
printf("failed to open file:%s\n", argv[optind]);
return -ENOENT;
}
status = fstat(in_file, &file_stat);
/* read header and obtain size of image */
status = read(in_file, &img_header, sizeof(img_header));
file_length = file_stat.st_size - sizeof(img_header);
if (img_header.length != file_length) {
printf("size in header:%d, size of file: %d\n",
img_header.length, file_length);
}
img_header.length = file_length;
/* read working image and CRC */
executable = malloc(file_length);
status = read(in_file, executable, file_length);
if (status != file_length) {
printf("Failed to load image\n");
return -ENOENT;
}
/* verify image CRC */
crc = crc32(0, (const unsigned char *) executable, img_header.length);
if (crc != img_header.img_CRC) {
printf("New Image CRC:0x%08x, hdr:0x%08x\n", crc,
img_header.img_CRC);
img_header.img_CRC = crc;
}
memcpy(img_header.code, "BOOT", 4);
img_header.header_length = sizeof(img_header);
/* check header CRC */
crc = crc32(0, (const unsigned char *) &img_header,
sizeof(img_header) - sizeof(unsigned int));
if (crc != img_header.CRC) {
printf("New header CRC - crc:0x%08x hdr:0x%08x\n", crc,
img_header.CRC);
img_header.CRC = crc;
}
/* re-write the file */
status = lseek(in_file, 0, SEEK_SET);
if (status != 0) {
printf("failed to rewind\n");
return 1;
}
len = write(in_file, &img_header, sizeof(img_header));
assert(len == sizeof(img_header));
len = write(in_file, executable, file_length);
assert(len == file_length);
close(in_file);
return 0;
}

View File

@ -0,0 +1,54 @@
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -19,4 +19,5 @@ obj-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc
obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o
obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o
obj-$(CONFIG_SPL_SATA_SUPPORT) += spl_sata.o
+obj-$(CONFIG_SPL_BLOCK_SUPPORT) += spl_block.o
endif
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -191,6 +191,14 @@ void board_init_r(gd_t *dummy1, ulong du
spl_spi_load_image();
break;
#endif
+#ifdef CONFIG_SPL_BLOCK_SUPPORT
+ case BOOT_DEVICE_BLOCK:
+ {
+ extern void spl_block_load_image(void);
+ spl_block_load_image();
+ break;
+ }
+#endif
#ifdef CONFIG_SPL_ETH_SUPPORT
case BOOT_DEVICE_CPGMAC:
#ifdef CONFIG_SPL_ETH_DEVICE
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -47,6 +47,7 @@ DECLARE_GLOBAL_DATA_PTR;
!defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \
!defined(CONFIG_ENV_IS_IN_REMOTE) && \
!defined(CONFIG_ENV_IS_IN_UBI) && \
+ !defined(CONFIG_ENV_IS_IN_EXT4) && \
!defined(CONFIG_ENV_IS_NOWHERE)
# error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|ONENAND|\
SPI_FLASH|NVRAM|MMC|FAT|REMOTE|UBI} or CONFIG_ENV_IS_NOWHERE
--- a/common/Makefile
+++ b/common/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_ENV_IS_IN_ONENAND) += env_o
obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
obj-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o
obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o
+obj-$(CONFIG_ENV_IS_IN_EXT4) += env_ext4.o
obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
# command
@@ -191,6 +192,8 @@ obj-$(CONFIG_UPDATE_TFTP) += update.o
obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
obj-$(CONFIG_CMD_DFU) += cmd_dfu.o
obj-$(CONFIG_CMD_GPT) += cmd_gpt.o
+else
+obj-$(CONFIG_SPL_BLOCK_SUPPORT) += cmd_ide.o
endif
ifdef CONFIG_SPL_BUILD

View File

@ -0,0 +1,99 @@
--- a/arch/arm/include/asm/mach-types.h
+++ b/arch/arm/include/asm/mach-types.h
@@ -212,6 +212,7 @@ extern unsigned int __machine_arch_type;
#define MACH_TYPE_EDB9307A 1128
#define MACH_TYPE_OMAP_3430SDP 1138
#define MACH_TYPE_VSTMS 1140
+#define MACH_TYPE_OXNAS 1152
#define MACH_TYPE_MICRO9M 1169
#define MACH_TYPE_BUG 1179
#define MACH_TYPE_AT91SAM9263EK 1202
--- a/boards.cfg
+++ b/boards.cfg
@@ -57,6 +57,11 @@ Active arm arm1136 mx35
Active arm arm1136 mx35 - woodburn woodburn_sd woodburn_sd:IMX_CONFIG=board/woodburn/imximage.cfg -
Active arm arm1136 mx35 CarMediaLab - flea3 - Stefano Babic <sbabic@denx.de>
Active arm arm1136 mx35 freescale - mx35pdk - Stefano Babic <sbabic@denx.de>
+Active arm arm1136 nas782x - - ox820 - -
+Active arm arm1136 nas782x - nas782x ox820_sata ox820:BOOT_FROM_SATA -
+Active arm arm1136 nas782x - nas782x ox820_fat ox820:BOOT_FROM_SATA,BOOT_FROM_FAT
+Active arm arm1136 nas782x - nas782x ox820_ext4 ox820:BOOT_FROM_SATA,BOOT_FROM_EXT4 -
+Active arm arm1136 nas782x - nas782x ox820_nand ox820:BOOT_FROM_NAND -
Active arm arm1176 bcm2835 raspberrypi rpi_b rpi_b - Stephen Warren <swarren@wwwdotorg.org>
Active arm arm1176 tnetv107x ti tnetv107xevm tnetv107x_evm - Chan-Taek Park <c-park@ti.com>
Active arm arm720t - armltd integrator integratorap_cm720t integratorap:CM720T Linus Walleij <linus.walleij@linaro.org>
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_IDE_SIL680) += sil680.o
obj-$(CONFIG_SANDBOX) += sandbox.o
obj-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o
obj-$(CONFIG_SYSTEMACE) += systemace.o
+obj-$(CONFIG_IDE_PLX) += plxsata_ide.o
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -135,6 +135,14 @@ static int calc_divisor (NS16550_t port)
}
#endif
+#ifdef CONFIG_OX820
+ {
+ /* with additional 3 bit fractional */
+ u32 div = (CONFIG_SYS_NS16550_CLK + gd->baudrate) / (gd->baudrate * 2);
+ port->reg9 = (div & 7) << 5;
+ return (div >> 3);
+ }
+#endif
#define MODE_X_DIV 16
/* Compute divisor value. Normally, we should simply return:
* CONFIG_SYS_NS16550_CLK) / MODE_X_DIV / gd->baudrate
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_USB_EHCI_MX6) += ehci-mx6.o
obj-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o
obj-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
+obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -207,8 +207,13 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS)
OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJCFLAGS) -O binary
+ifdef CONFIG_OX820
$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE
$(call if_changed,objcopy)
+ $(OBJTREE)/tools/mkox820crc $@
+else
+ $(call if_changed,objcopy)
+endef
LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
ifneq ($(CONFIG_SPL_TEXT_BASE),)
--- a/tools/.gitignore
+++ b/tools/.gitignore
@@ -7,6 +7,7 @@
/mkenvimage
/mkimage
/mkexynosspl
+/mkox820crc
/mpc86x_clk
/mxsboot
/ncb
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -131,6 +131,12 @@ hostprogs-$(CONFIG_KIRKWOOD) += kwboot$(
hostprogs-y += proftool$(SFX)
hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela$(SFX)
+
+hostprogs-$(CONFIG_OX820) += mkox820crc$(SFX)
+
+mkox820crc$(SFX)-objs := mkox820crc.o crc32.o
+
+
# We build some files with extra pedantic flags to try to minimize things
# that won't build on some weird host compiler -- though there are lots of
# exceptions for files that aren't complaint.

View File

@ -0,0 +1,13 @@
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 166b901..9af3fd3 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -745,7 +745,7 @@ static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc,
return CMD_RET_USAGE;
}
- if (state != BOOTM_STATE_START && images.state >= state) {
+ if (!(state & BOOTM_STATE_START) && images.state >= state) {
printf("Trying to execute a command out of order\n");
return CMD_RET_USAGE;
}