diff --git a/package/boot/uboot-envtools/Makefile b/package/boot/uboot-envtools/Makefile index 73cd083d0a..4a86376f7c 100644 --- a/package/boot/uboot-envtools/Makefile +++ b/package/boot/uboot-envtools/Makefile @@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=uboot-envtools PKG_DISTNAME:=u-boot PKG_VERSION:=2020.04 -PKG_RELEASE:=5 +PKG_RELEASE:=6 PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_URL:= \ diff --git a/package/boot/uboot-envtools/files/mvebu b/package/boot/uboot-envtools/files/mvebu index 85101cf35b..afa058a39f 100644 --- a/package/boot/uboot-envtools/files/mvebu +++ b/package/boot/uboot-envtools/files/mvebu @@ -26,6 +26,7 @@ glinet,gl-mv1000) ;; globalscale,espressobin|\ globalscale,espressobin-emmc|\ +globalscale,espressobin-ultra|\ globalscale,espressobin-v7|\ globalscale,espressobin-v7-emmc) idx="$(find_mtd_index u-boot-env)" diff --git a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network index 0a2a2b144c..c945251e4e 100755 --- a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network @@ -18,6 +18,9 @@ globalscale,espressobin-v7|\ globalscale,espressobin-v7-emmc) ucidef_set_interfaces_lan_wan "lan0 lan1" "wan" ;; +globalscale,espressobin-ultra) + ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan" + ;; marvell,armada-3720-db|\ methode,udpu) ucidef_set_interfaces_lan_wan "eth1" "eth0" diff --git a/target/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh index cdf5933272..1153fd8f38 100755 --- a/target/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh +++ b/target/linux/mvebu/cortexa53/base-files/lib/upgrade/platform.sh @@ -11,6 +11,7 @@ platform_check_image() { case "$(board_name)" in globalscale,espressobin|\ globalscale,espressobin-emmc|\ + globalscale,espressobin-ultra|\ globalscale,espressobin-v7|\ globalscale,espressobin-v7-emmc) platform_check_image_sdcard "$1" @@ -25,6 +26,7 @@ platform_do_upgrade() { case "$(board_name)" in globalscale,espressobin|\ globalscale,espressobin-emmc|\ + globalscale,espressobin-ultra|\ globalscale,espressobin-v7|\ globalscale,espressobin-v7-emmc) platform_do_upgrade_sdcard "$1" @@ -41,6 +43,7 @@ platform_copy_config() { case "$(board_name)" in globalscale,espressobin|\ globalscale,espressobin-emmc|\ + globalscale,espressobin-ultra|\ globalscale,espressobin-v7|\ globalscale,espressobin-v7-emmc) platform_copy_config_sdcard diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts new file mode 100644 index 0000000000..669b67e5a9 --- /dev/null +++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for ESPRESSObin-Ultra + * Copyright (C) 2019 Globalscale technologies, Inc. + * + * Jason Hung + */ + +/dts-v1/; + +#include +#include "armada-372x.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Ultra Board"; + compatible = "globalscale,espressobin-ultra", "marvell,armada3720", + "marvell,armada3710"; + + aliases { + /* for dsa slave device */ + ethernet1 = &switch0port1; + ethernet2 = &switch0port2; + ethernet3 = &switch0port3; + ethernet4 = &switch0port4; + ethernet5 = &switch0port5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_vbus>; + }; + + leds { + pinctrl-names = "default"; + compatible = "gpio-leds"; + /* No assigned functions to the LEDs by default */ + led1 { + label = "ebin-ultra:blue:led1"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + led2 { + label = "ebin-ultra:green:led2"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + led3 { + label = "ebin-ultra:red:led3"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + led4 { + label = "ebin-ultra:yellow:led4"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sdhci0 { + status = "okay"; + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x3e0000>; + }; + partition@3e0000 { + label = "hw-info"; + reg = <0x3e0000 0x10000>; + read-only; + }; + partition@3f0000 { + label = "u-boot-env"; + reg = <0x3f0000 0x10000>; + }; + }; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <100000>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&usb3 { + status = "okay"; + usb-phy = <&usb3_phy>; +}; + +&usb2 { + status = "okay"; +}; + +ð0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&mdio { + status = "okay"; + + extphy: ethernet-phy@0 { + reg = <1>; + }; + + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch0port0: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + }; + + switch0port1: port@1 { + reg = <1>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + switch0port2: port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + + switch0port3: port@3 { + reg = <3>; + label = "lan2"; + phy-handle = <&switch0phy3>; + }; + + switch0port4: port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&switch0phy4>; + }; + + switch0port5: port@5 { + reg = <5>; + label = "wan"; + phy-handle = <&extphy>; + phy-mode = "sgmii"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: switch0phy1@11 { + reg = <0x11>; + }; + switch0phy2: switch0phy2@12 { + reg = <0x12>; + }; + switch0phy3: switch0phy3@13 { + reg = <0x13>; + }; + switch0phy4: switch0phy4@14 { + reg = <0x14>; + }; + }; + }; +}; diff --git a/target/linux/mvebu/image/cortexa53.mk b/target/linux/mvebu/image/cortexa53.mk index b65f25472c..6a3a568655 100644 --- a/target/linux/mvebu/image/cortexa53.mk +++ b/target/linux/mvebu/image/cortexa53.mk @@ -32,6 +32,17 @@ define Device/globalscale_espressobin-emmc endef TARGET_DEVICES += globalscale_espressobin-emmc +define Device/globalscale_espressobin-ultra + $(call Device/Default-arm64) + DEVICE_VENDOR := Marvell + DEVICE_MODEL := ESPRESSObin + DEVICE_VARIANT := Ultra + DEVICE_PACKAGES += kmod-i2c-pxa kmod-rtc-pcf8563 + SOC := armada-3720 + BOOT_SCRIPT := espressobin +endef +TARGET_DEVICES += globalscale_espressobin-ultra + define Device/globalscale_espressobin-v7 $(call Device/Default-arm64) DEVICE_VENDOR := Marvell