ar7: switch from uci-defaults to board.d

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47757
This commit is contained in:
Jo-Philipp Wich 2015-12-04 14:27:47 +00:00
parent 1e4478e83a
commit ca00bd2be4
3 changed files with 28 additions and 80 deletions

View File

@ -0,0 +1,28 @@
#!/bin/sh
. /lib/functions/uci-defaults-new.sh
board_config_update
if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175A/1:00" -o \
-e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/1:00" ] && \
[ -x /sbin/swconfig ];
then
ucidef_add_switch "eth0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
elif [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/1:00" -o \
-e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/1:10" ];
then
ucidef_set_interface_lan "eth0.1"
elif [ -d "/sys/class/net/eth1" ]; then
ucidef_set_interface_lan "eth0 eth1"
else
ucidef_set_interface_lan "eth0"
fi
board_config_flush
exit 0

View File

@ -1,50 +0,0 @@
# Copyright (C) 2006 OpenWrt.org
config interface loopback
option ifname lo
option proto static
option ipaddr 127.0.0.1
option netmask 255.0.0.0
config interface lan
option type bridge
option ifname "eth0 eth1 eth0.1 eth0.2"
option proto static
option ipaddr 192.168.1.1
option netmask 255.255.255.0
option nat 1
option ip6assign 60
config interface wan6
option ifname @wan
option proto dhcpv6
config globals globals
option ula_prefix auto
## Example for ATM bridging.
## Useful for PPPoE or IP over ATM. Will create 'nas${unit}'
#
# config atm-bridge
# option unit 0
# option encaps llc
# option vpi 8
# option vci 35
# option payload bridged # some ISPs need this set to 'routed'
# config interface wan
## PPPoE:
# option ifname nas0
# option proto pppoe
## PPPoA:
# option ifname atm0
# option proto pppoa
# option encaps llc
# option vpi 8
# option vci 35
## Both:
# option username "my_username"
# option password "my_password"

View File

@ -1,30 +0,0 @@
#!/bin/sh
if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175A/1:00" -o \
-e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/1:00" ] && \
[ -x /sbin/swconfig ];
then
uci batch <<EOF
set network.eth0=switch
set network.eth0.name=eth0
set network.eth0.reset=1
set network.eth0.enable_vlan=1
set network.eth0_1=switch_vlan
set network.eth0_1.device=eth0
set network.eth0_1.vlan=1
set network.eth0_1.ports="0 1 2 3 4t"
commit network
EOF
HAS_SWITCH=1
fi
if [ -n "$HAS_SWITCH" -o \
-e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/1:00" -o \
-e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/1:10" ]; then
uci batch <<EOF
set network.lan.ifname=eth0.1
commit network
EOF
HAS_SWITCH=1
fi
uci commit network