atheros: various comments fixes
Fix comment issues detected by checkpatch. Convert C99 // comments to ordinary /* ... */ comments. Correct block comments style or convert them to single line comments. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 41081
This commit is contained in:
Felix Fietkau
parent
ea9360a5c6
commit
cb50efa835
|
|
@ -1766,11 +1766,11 @@
|
|||
+ .set = ar5312_gpio_set_value,
|
||||
+ .get = ar5312_gpio_get_value,
|
||||
+ .base = 0,
|
||||
+ .ngpio = AR531X_GPIO_IRQ_COUNT, // 22
|
||||
+ .ngpio = AR531X_GPIO_IRQ_COUNT, /* 22 */
|
||||
+ }
|
||||
+};
|
||||
+
|
||||
+// end of gpiolib
|
||||
+/* end of gpiolib */
|
||||
+
|
||||
+static struct physmap_flash_data ar5312_flash_data = {
|
||||
+ .width = 2,
|
||||
|
|
@ -2406,7 +2406,7 @@
|
|||
+ u32 rett;
|
||||
+ if (!(gpch->valid_mask & mask))
|
||||
+ return 0;
|
||||
+ rett = ar2315_gpio_get(gpch->valid_mask); // legacy code
|
||||
+ rett = ar2315_gpio_get(gpch->valid_mask); /* legacy code */
|
||||
+ return !!(rett & mask);
|
||||
+}
|
||||
+
|
||||
|
|
@ -2418,7 +2418,7 @@
|
|||
+ u32 mask = 1 << gpio;
|
||||
+ if (!(gpch->valid_mask & mask))
|
||||
+ return;
|
||||
+ ar2315_gpio_set(mask, (!!value) * mask); // legacy
|
||||
+ ar2315_gpio_set(mask, (!!value) * mask); /* legacy */
|
||||
+}
|
||||
+
|
||||
+static int
|
||||
|
|
@ -2429,7 +2429,7 @@
|
|||
+ u32 mask = 1 << gpio;
|
||||
+ if (!(gpch->valid_mask & mask))
|
||||
+ return -ENXIO;
|
||||
+ ar2315_gpio_set_output(mask, 0); // legacy
|
||||
+ ar2315_gpio_set_output(mask, 0); /* legacy */
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
|
|
@ -2441,7 +2441,7 @@
|
|||
+ u32 mask = 1 << gpio;
|
||||
+ if (!(gpch->valid_mask & mask))
|
||||
+ return -ENXIO;
|
||||
+ ar2315_gpio_set_output(mask, mask); // both legacy
|
||||
+ ar2315_gpio_set_output(mask, mask); /* both legacy */
|
||||
+ ar2315_gpio_set(mask, (!!value) * mask);
|
||||
+ return 0;
|
||||
+}
|
||||
|
|
@ -2455,11 +2455,11 @@
|
|||
+ .set = ar2315_gpio_set_value,
|
||||
+ .get = ar2315_gpio_get_value,
|
||||
+ .base = 0,
|
||||
+ .ngpio = AR531X_GPIO_IRQ_COUNT, // 22
|
||||
+ .ngpio = AR531X_GPIO_IRQ_COUNT, /* 22 */
|
||||
+ }
|
||||
+};
|
||||
+
|
||||
+// end of gpiolib
|
||||
+/* end of gpiolib */
|
||||
+
|
||||
+
|
||||
+static struct ar231x_eth ar2315_eth_data = {
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@
|
|||
+obj-$(CONFIG_NET_VENDOR_AR231X) += ar231x.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/net/ethernet/ar231x/ar231x.c
|
||||
@@ -0,0 +1,1278 @@
|
||||
@@ -0,0 +1,1265 @@
|
||||
+/*
|
||||
+ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
|
||||
+ *
|
||||
|
|
@ -103,7 +103,7 @@
|
|||
+
|
||||
+#include "ar231x.h"
|
||||
+
|
||||
+/*
|
||||
+/**
|
||||
+ * New interrupt handler strategy:
|
||||
+ *
|
||||
+ * An old interrupt handler worked using the traditional method of
|
||||
|
|
@ -142,7 +142,7 @@
|
|||
+ * handler.
|
||||
+ */
|
||||
+
|
||||
+/*
|
||||
+/**
|
||||
+ * Threshold values for RX buffer allocation - the low water marks for
|
||||
+ * when to start refilling the rings are set to 75% of the ring
|
||||
+ * sizes. It seems to make sense to refill the rings entirely from the
|
||||
|
|
@ -173,7 +173,7 @@
|
|||
+
|
||||
+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
|
||||
+
|
||||
+// prototypes
|
||||
+/* prototypes */
|
||||
+static void ar231x_halt(struct net_device *dev);
|
||||
+static void rx_tasklet_func(unsigned long data);
|
||||
+static void rx_tasklet_cleanup(struct net_device *dev);
|
||||
|
|
@ -265,7 +265,7 @@
|
|||
+ return (-ENXIO);
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ /**
|
||||
+ * When there's only one MAC, PHY regs are typically on ENET0,
|
||||
+ * even though the MAC might be on ENET1.
|
||||
+ * Needto remap PHY regs separately in this case
|
||||
|
|
@ -302,9 +302,7 @@
|
|||
+ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
|
||||
+
|
||||
+ if (ar231x_init(dev)) {
|
||||
+ /*
|
||||
+ * ar231x_init() calls ar231x_init_cleanup() on error.
|
||||
+ */
|
||||
+ /* ar231x_init() calls ar231x_init_cleanup() on error */
|
||||
+ kfree(dev);
|
||||
+ return -ENODEV;
|
||||
+ }
|
||||
|
|
@ -373,7 +371,7 @@
|
|||
+{
|
||||
+ struct ar231x_private *sp = netdev_priv(dev);
|
||||
+
|
||||
+ /*
|
||||
+ /**
|
||||
+ * Tasklet may be scheduled. Need to get it removed from the list
|
||||
+ * since we're about to free the struct.
|
||||
+ */
|
||||
|
|
@ -397,7 +395,7 @@
|
|||
+}
|
||||
+
|
||||
+
|
||||
+/*
|
||||
+/**
|
||||
+ * Restart the AR2313 ethernet controller.
|
||||
+ */
|
||||
+static int ar231x_restart(struct net_device *dev)
|
||||
|
|
@ -483,7 +481,7 @@
|
|||
+}
|
||||
+
|
||||
+
|
||||
+/*
|
||||
+/**
|
||||
+ * Generic cleanup handling data allocated during init. Used when the
|
||||
+ * module is unloaded or if an error occurs during initialization
|
||||
+ */
|
||||
|
|
@ -545,13 +543,17 @@
|
|||
+ struct net_device *dev = (struct net_device *) data;
|
||||
+ struct ar231x_private *sp = netdev_priv(dev);
|
||||
+
|
||||
+ // see if the link status changed
|
||||
+ // This was needed to make sure we set the PHY to the
|
||||
+ // autonegotiated value of half or full duplex.
|
||||
+ /**
|
||||
+ * See if the link status changed.
|
||||
+ * This was needed to make sure we set the PHY to the
|
||||
+ * autonegotiated value of half or full duplex.
|
||||
+ */
|
||||
+ ar231x_check_link(dev);
|
||||
+
|
||||
+ // Loop faster when we don't have link.
|
||||
+ // This was needed to speed up the AP bootstrap time.
|
||||
+ /**
|
||||
+ * Loop faster when we don't have link.
|
||||
+ * This was needed to speed up the AP bootstrap time.
|
||||
+ */
|
||||
+ if (sp->link == 0) {
|
||||
+ mod_timer(&sp->link_timer, jiffies + HZ / 2);
|
||||
+ } else {
|
||||
|
|
@ -567,8 +569,10 @@
|
|||
+ phy_data = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
|
||||
+ if (sp->phy_data != phy_data) {
|
||||
+ if (phy_data & BMSR_LSTATUS) {
|
||||
+ /* link is present, ready link partner ability to deterine
|
||||
+ duplexity */
|
||||
+ /**
|
||||
+ * Link is present, ready link partner ability to
|
||||
+ * deterine duplexity.
|
||||
+ */
|
||||
+ int duplex = 0;
|
||||
+ u16 reg;
|
||||
+
|
||||
|
|
@ -672,9 +676,7 @@
|
|||
+ struct ar231x_private *sp = netdev_priv(dev);
|
||||
+ int ecode = 0;
|
||||
+
|
||||
+ /*
|
||||
+ * Allocate descriptors
|
||||
+ */
|
||||
+ /* Allocate descriptors */
|
||||
+ if (ar231x_allocate_descriptors(dev)) {
|
||||
+ printk("%s: %s: ar231x_allocate_descriptors failed\n",
|
||||
+ dev->name, __FUNCTION__);
|
||||
|
|
@ -682,9 +684,7 @@
|
|||
+ goto init_error;
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * Get the memory for the skb rings.
|
||||
+ */
|
||||
+ /* Get the memory for the skb rings */
|
||||
+ if (sp->rx_skb == NULL) {
|
||||
+ sp->rx_skb =
|
||||
+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
|
||||
|
|
@ -711,7 +711,7 @@
|
|||
+ }
|
||||
+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
|
||||
+
|
||||
+ /*
|
||||
+ /**
|
||||
+ * Set tx_csm before we start receiving interrupts, otherwise
|
||||
+ * the interrupt handler might think it is supposed to process
|
||||
+ * tx ints before we are up and running, which may cause a null
|
||||
|
|
@ -722,25 +722,19 @@
|
|||
+ sp->tx_prd = 0;
|
||||
+ sp->tx_csm = 0;
|
||||
+
|
||||
+ /*
|
||||
+ * Zero the stats before starting the interface
|
||||
+ */
|
||||
+ /* Zero the stats before starting the interface */
|
||||
+ memset(&dev->stats, 0, sizeof(dev->stats));
|
||||
+
|
||||
+ /*
|
||||
+ /**
|
||||
+ * We load the ring here as there seem to be no way to tell the
|
||||
+ * firmware to wipe the ring without re-initializing it.
|
||||
+ */
|
||||
+ ar231x_load_rx_ring(dev, RX_RING_SIZE);
|
||||
+
|
||||
+ /*
|
||||
+ * Init hardware
|
||||
+ */
|
||||
+ /* Init hardware */
|
||||
+ ar231x_reset_reg(dev);
|
||||
+
|
||||
+ /*
|
||||
+ * Get the IRQ
|
||||
+ */
|
||||
+ /* Get the IRQ */
|
||||
+ ecode =
|
||||
+ request_irq(dev->irq, &ar231x_interrupt,
|
||||
+ IRQF_DISABLED,
|
||||
|
|
@ -761,7 +755,7 @@
|
|||
+ return ecode;
|
||||
+}
|
||||
+
|
||||
+/*
|
||||
+/**
|
||||
+ * Load the rx ring.
|
||||
+ *
|
||||
+ * Loading rings is safe without holding the spin lock since this is
|
||||
|
|
@ -790,9 +784,7 @@
|
|||
+ break;
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * Make sure IP header starts on a fresh cache line.
|
||||
+ */
|
||||
+ /* Make sure IP header starts on a fresh cache line */
|
||||
+ skb->dev = dev;
|
||||
+ sp->rx_skb[idx] = skb;
|
||||
+
|
||||
|
|
@ -830,8 +822,7 @@
|
|||
+
|
||||
+ idx = sp->cur_rx;
|
||||
+
|
||||
+ /* process at most the entire ring and then wait for another interrupt
|
||||
+ */
|
||||
+ /* process at most the entire ring and then wait for another int */
|
||||
+ while (1) {
|
||||
+
|
||||
+ rxdesc = &sp->rx_ring[idx];
|
||||
|
|
@ -991,16 +982,14 @@
|
|||
+ unsigned int status, enabled;
|
||||
+
|
||||
+ /* clear interrupt */
|
||||
+ /*
|
||||
+ * Don't clear RI bit if currently disabled.
|
||||
+ */
|
||||
+ /* Don't clear RI bit if currently disabled */
|
||||
+ status = sp->dma_regs->status;
|
||||
+ enabled = sp->dma_regs->intr_ena;
|
||||
+ sp->dma_regs->status = status & enabled;
|
||||
+
|
||||
+ if (status & DMA_STATUS_NIS) {
|
||||
+ /* normal status */
|
||||
+ /*
|
||||
+ /**
|
||||
+ * Don't schedule rx processing if interrupt
|
||||
+ * is already disabled.
|
||||
+ */
|
||||
|
|
@ -1092,7 +1081,7 @@
|
|||
+ }
|
||||
+}
|
||||
+
|
||||
+/*
|
||||
+/**
|
||||
+ * close should do nothing. Here's why. It's called when
|
||||
+ * 'ifconfig bond0 down' is run. If it calls free_irq then
|
||||
+ * the irq is gone forever ! When bond0 is made 'up' again,
|
||||
|
|
@ -1105,12 +1094,10 @@
|
|||
+static int ar231x_close(struct net_device *dev)
|
||||
+{
|
||||
+#if 0
|
||||
+ /*
|
||||
+ * Disable interrupts
|
||||
+ */
|
||||
+ /* Disable interrupts */
|
||||
+ disable_irq(dev->irq);
|
||||
+
|
||||
+ /*
|
||||
+ /**
|
||||
+ * Without (or before) releasing irq and stopping hardware, this
|
||||
+ * is an absolute non-sense, by the way. It will be reset instantly
|
||||
+ * by the first irq.
|
||||
|
|
@ -1313,7 +1300,7 @@
|
|||
+
|
||||
--- /dev/null
|
||||
+++ b/drivers/net/ethernet/ar231x/ar231x.h
|
||||
@@ -0,0 +1,303 @@
|
||||
@@ -0,0 +1,289 @@
|
||||
+/*
|
||||
+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
|
||||
+ *
|
||||
|
|
@ -1339,9 +1326,7 @@
|
|||
+#include <asm/bootinfo.h>
|
||||
+#include <ar231x_platform.h>
|
||||
+
|
||||
+/*
|
||||
+ * probe link timer - 5 secs
|
||||
+ */
|
||||
+/* probe link timer - 5 secs */
|
||||
+#define LINK_TIMER (5*HZ)
|
||||
+
|
||||
+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
|
||||
|
|
@ -1350,9 +1335,7 @@
|
|||
+
|
||||
+#define AR2313_TX_TIMEOUT (HZ/4)
|
||||
+
|
||||
+/*
|
||||
+ * Rings
|
||||
+ */
|
||||
+/* Rings */
|
||||
+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
|
||||
+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
|
||||
+
|
||||
|
|
@ -1470,17 +1453,17 @@
|
|||
+
|
||||
+
|
||||
+typedef struct {
|
||||
+ volatile unsigned int status; // OWN, Device control and status.
|
||||
+ volatile unsigned int devcs; // pkt Control bits + Length
|
||||
+ volatile unsigned int addr; // Current Address.
|
||||
+ volatile unsigned int descr; // Next descriptor in chain.
|
||||
+ volatile unsigned int status; /* OWN, Device control and status. */
|
||||
+ volatile unsigned int devcs; /* pkt Control bits + Length */
|
||||
+ volatile unsigned int addr; /* Current Address. */
|
||||
+ volatile unsigned int descr; /* Next descriptor in chain. */
|
||||
+} ar231x_descr_t;
|
||||
+
|
||||
+
|
||||
+
|
||||
+//
|
||||
+// New Combo structure for Both Eth0 AND eth1
|
||||
+//
|
||||
+/**
|
||||
+ * New Combo structure for Both Eth0 AND eth1
|
||||
+ */
|
||||
+typedef struct {
|
||||
+ volatile unsigned int mac_control; /* 0x00 */
|
||||
+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
|
||||
|
|
@ -1526,7 +1509,7 @@
|
|||
+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
|
||||
+} DMA;
|
||||
+
|
||||
+/*
|
||||
+/**
|
||||
+ * Struct private for the Sibyte.
|
||||
+ *
|
||||
+ * Elements are grouped so variables used by the tx handling goes
|
||||
|
|
@ -1549,9 +1532,7 @@
|
|||
+
|
||||
+ spinlock_t lock; /* Serialise access to device */
|
||||
+
|
||||
+ /*
|
||||
+ * RX and TX descriptors, must be adjacent
|
||||
+ */
|
||||
+ /* RX and TX descriptors, must be adjacent */
|
||||
+ ar231x_descr_t *rx_ring;
|
||||
+ ar231x_descr_t *tx_ring;
|
||||
+
|
||||
|
|
@ -1559,21 +1540,15 @@
|
|||
+ struct sk_buff **rx_skb;
|
||||
+ struct sk_buff **tx_skb;
|
||||
+
|
||||
+ /*
|
||||
+ * RX elements
|
||||
+ */
|
||||
+ /* RX elements */
|
||||
+ u32 rx_skbprd;
|
||||
+ u32 cur_rx;
|
||||
+
|
||||
+ /*
|
||||
+ * TX elements
|
||||
+ */
|
||||
+ /* TX elements */
|
||||
+ u32 tx_prd;
|
||||
+ u32 tx_csm;
|
||||
+
|
||||
+ /*
|
||||
+ * Misc elements
|
||||
+ */
|
||||
+ /* Misc elements */
|
||||
+ char name[48];
|
||||
+ struct {
|
||||
+ u32 address;
|
||||
|
|
@ -1597,9 +1572,7 @@
|
|||
+};
|
||||
+
|
||||
+
|
||||
+/*
|
||||
+ * Prototypes
|
||||
+ */
|
||||
+/* Prototypes */
|
||||
+static int ar231x_init(struct net_device *dev);
|
||||
+#ifdef TX_TIMEOUT
|
||||
+static void ar231x_tx_timeout(struct net_device *dev);
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@
|
|||
|
||||
#ifndef ERR
|
||||
#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
|
||||
@@ -182,6 +183,30 @@ static const struct net_device_ops ar231
|
||||
@@ -182,6 +183,32 @@ static const struct net_device_ops ar231
|
||||
#endif
|
||||
};
|
||||
|
||||
|
|
@ -16,8 +16,10 @@
|
|||
+{
|
||||
+ int phy_reg;
|
||||
+
|
||||
+ /* Grab the bits from PHYIR1, and put them
|
||||
+ * in the upper half */
|
||||
+ /**
|
||||
+ * Grab the bits from PHYIR1, and put them
|
||||
+ * in the upper half.
|
||||
+ */
|
||||
+ phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
|
||||
+
|
||||
+ if (phy_reg < 0)
|
||||
|
|
@ -39,12 +41,14 @@
|
|||
int ar231x_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct net_device *dev;
|
||||
@@ -299,6 +324,21 @@ int ar231x_probe(struct platform_device
|
||||
@@ -297,6 +324,23 @@ int ar231x_probe(struct platform_device
|
||||
|
||||
mdiobus_register(sp->mii_bus);
|
||||
|
||||
+ /* Workaround for Micrel switch, which is only available on
|
||||
+ * one PHY and cannot be configured through MDIO */
|
||||
+ /**
|
||||
+ * Workaround for Micrel switch, which is only available on
|
||||
+ * one PHY and cannot be configured through MDIO.
|
||||
+ */
|
||||
+ if (!no_phy) {
|
||||
+ u32 phy_id = 0;
|
||||
+ get_phy_id(sp->mii_bus, 1, &phy_id);
|
||||
|
|
@ -61,7 +65,7 @@
|
|||
if (ar231x_mdiobus_probe(dev) != 0) {
|
||||
printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
|
||||
rx_tasklet_cleanup(dev);
|
||||
@@ -355,8 +395,10 @@ static int ar231x_remove(struct platform
|
||||
@@ -353,8 +397,10 @@ static int ar231x_remove(struct platform
|
||||
rx_tasklet_cleanup(dev);
|
||||
ar231x_init_cleanup(dev);
|
||||
unregister_netdev(dev);
|
||||
|
|
@ -74,7 +78,7 @@
|
|||
kfree(dev);
|
||||
return 0;
|
||||
}
|
||||
@@ -1132,6 +1174,9 @@ static int ar231x_ioctl(struct net_devic
|
||||
@@ -1119,6 +1165,9 @@ static int ar231x_ioctl(struct net_devic
|
||||
struct ar231x_private *sp = netdev_priv(dev);
|
||||
int ret;
|
||||
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
--- a/drivers/net/ethernet/ar231x/ar231x.c
|
||||
+++ b/drivers/net/ethernet/ar231x/ar231x.c
|
||||
@@ -1291,7 +1291,7 @@ static int ar231x_mdiobus_probe (struct
|
||||
@@ -1282,7 +1282,7 @@ static int ar231x_mdiobus_probe (struct
|
||||
BUG_ON(!phydev);
|
||||
BUG_ON(phydev->attached_dev);
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user