ath79: further fixes for ZyXEL NBG6716

This applies further fixes to the DTS of ZyXEL NBG6716 based on
what is found in ar71xx (mach-nbg6716.c):

- use WiFi label names as in ar71xx
- fix WPS gpio number
- fix GPIO_ACTIVE_HIGH and mode for WiFi switch
- add codes for USB eject buttons
- fix node name for "internet" LED

This device has separate LEDs for WAN and "Internet". As the WAN-LED
(and the four LAN-LEDs) are driven independent of the setup in
DT/01_leds, the "internet" LED is left unassigned (in contrast to
ar71xx, where it was set up effectively as a second WAN LED)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Adrian Schmutzler 2020-04-08 14:43:04 +02:00
parent 9fd36f54f5
commit d0cb6e995b

View File

@ -29,7 +29,7 @@
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan {
internet {
label = "nbg6716:white:internet";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
@ -48,21 +48,21 @@
trigger-sources = <&hub_port0>;
};
wifi2 {
label = "nbg6716:white:wifi2";
wifi2g {
label = "nbg6716:white:wifi2g";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wifi5 {
label = "nbg6716:white:wifi5";
wifi5g {
label = "nbg6716:white:wifi5g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wps {
label = "nbg6716:white:wps";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
@ -79,18 +79,21 @@
wifi {
label = "WiFi button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
usb1 {
label = "USB1 eject button";
linux,code = <BTN_1>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
usb2 {
label = "USB2 eject button";
linux,code = <BTN_2>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};