ramips: add support for TP-Link TL-WR840N v5

TP-Link TL-WR840N v5 is simple N300 router with 5-port FE switch and
non-detachable antennas, based on MediaTek MT7628NN (aka MT7628N) WiSoC.

Specification:

- MT7628N/N (580 MHz)
- 64 MB of RAM (DDR2)
- 4 MB of FLASH
- 2T2R 2.4 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 1x LED (GPIO-controlled), 1x button

* LED in TL-WR840N v5 is a dual-color, dual-leads type which isn't
  (fully) supported by gpio-leds driver. This type of LED requires both
  GPIOs state change at the same time to select color or turn it off.
  For now, we support/use only the green part of the LED.
  Orange LED is registered so you can later use it for your own purposes.

  Flash instruction:

  Unlike TL-WR840N v4 flashing through WEB UI works in v5.
  1. Download lede-ramips-mt76x8-tl-wr840n-v5-squashfs-sysupgrade.bin image.
  2. Go to 192.168.0.1
  3. Flash the sysupgrade image through Firmware upgrade section of WEB UI.
  4. Wait until green LED stops flashing and use the router.

Notes:
TFTP recovery is broken since TP-Link reused bootloader code for v4 and
that does not take into account only 4 MB of flash and bricks the device.
So do not use TFTP Recovery or you will have to rewrite SPI flash.
They fixed it in later GPL code,but it is unknown which version of
bootloader you have.

After manually compiling and flashing bootloader from GPL sources TFTP
recovery works properly.

Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Robert Marko 2017-11-08 14:00:06 +01:00 committed by Mathias Kresin
parent 73c745f64f
commit d0ef27594a
7 changed files with 139 additions and 1 deletions

View File

@ -171,6 +171,7 @@ ramips_setup_interfaces()
rb750gr3|\
rt-n14u|\
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13|\
ubnt-erx|\
ubnt-erx-sfp|\

View File

@ -37,6 +37,7 @@ get_status_led() {
pwh2004|\
r6220|\
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13|\
vr500|\
wnce2001|\

View File

@ -502,6 +502,9 @@ ramips_board_detect() {
*"TL-WR840N v4")
name="tl-wr840n-v4"
;;
*"TL-WR840N v5")
name="tl-wr840n-v5"
;;
*"TL-WR841N v13")
name="tl-wr841n-v13"
;;

View File

@ -236,6 +236,7 @@ platform_check_image() {
c50|\
mr200|\
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13)
[ "$magic" != "03000000" ] && {
echo "Invalid image type."

View File

@ -0,0 +1,111 @@
/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,tl-wr840n-v5", "mediatek,mt7628an-soc";
model = "TP-Link TL-WR840N v5";
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
/* LED used is dual-color,dual lead LED */
gpio-leds {
compatible = "gpio-leds";
power {
label = "tl-wr840n-v5:green:power";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
orange {
label = "tl-wr840n-v5:orange:power";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3c0000>;
};
partition@3e0000 {
label = "config";
reg = <0x3e0000 0x10000>;
read-only;
};
factory: partition@3f0000 {
label = "factory";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
&ehci {
status = "disabled";
};
&ohci {
status = "disabled";
};
&wmac {
status = "okay";
mtd-mac-address = <&factory 0xf100>;
mediatek,mtd-eeprom = <&factory 0x10000>;
};
&ethernet {
mtd-mac-address = <&factory 0xf100>;
mediatek,portmap = "wllll";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "p0led_an", "p2led_an", "perst";
ralink,function = "gpio";
};
};
};

View File

@ -99,6 +99,21 @@ define Device/tl-wr840n-v4
check-size $$$$(IMAGE_SIZE)
endef
define Device/tl-wr840n-v5
DTS := TL-WR840NV5
IMAGE_SIZE := 3840k
DEVICE_TITLE := TP-Link TL-WR840N v5
TPLINK_FLASHLAYOUT := 4Mmtk
TPLINK_HWID := 0x08400005
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x5
TPLINK_HVERSION := 3
KERNEL := $(KERNEL_DTB)
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata | \
check-size $$$$(IMAGE_SIZE)
endef
define Device/tl-wr841n-v13
$(Device/tl-wr840n-v4)
DTS := TL-WR841NV13
@ -107,7 +122,7 @@ define Device/tl-wr841n-v13
TPLINK_HWREV := 0x268
TPLINK_HWREVADD := 0x13
endef
TARGET_DEVICES += tl-wr840n-v4 tl-wr841n-v13
TARGET_DEVICES += tl-wr840n-v4 tl-wr840n-v5 tl-wr841n-v13
define Device/vocore2
DTS := VOCORE2

View File

@ -123,6 +123,12 @@ char md5salt_boot[MD5SUM_LEN] = {
static struct flash_layout layouts[] = {
{
.id = "4Mmtk",
.fw_max_len = 0x3c0000,
.kernel_la = 0x80000000,
.kernel_ep = 0x80000000,
.rootfs_ofs = 0x140000,
}, {
.id = "8Mltq",
.fw_max_len = 0x7a0000,
.kernel_la = 0x80002000,