ramips: Add DTS files for HiWiFi HC5x61 models

HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.

The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval.

v3 fix
  1: Merged most stuff into dtsi file
  2: Remove unnecessary empty lines.

Signed-off-by: Xiaoning Kang <kangxn@163.com>

SVN-Revision: 47112
This commit is contained in:
John Crispin 2015-10-05 10:25:53 +00:00
parent c10bdf11ff
commit e6e373d348
4 changed files with 299 additions and 0 deletions

View File

@ -0,0 +1,32 @@
/dts-v1/;
/include/ "HC5XXX.dtsi"
/ {
compatible = "HC5661", "ralink,mt7620a-soc";
model = "HiWiFi HC5661";
gpio-leds {
compatible = "gpio-leds";
system {
label = "hc5661:blue:system";
gpios = <&gpio0 9 1>;
};
internet {
label = "hc5661:blue:internet";
gpios = <&gpio0 11 1>;
};
wlan2g {
label = "hc5661:blue:wlan2g";
gpios = <&gpio3 0 1>;
};
wlan5g {
label = "hc5661:blue:wlan5g";
gpios = <&gpio0 7 1>;
};
};
};

View File

@ -0,0 +1,32 @@
/dts-v1/;
/include/ "HC5XXX.dtsi"
/ {
compatible = "HC5761", "ralink,mt7620a-soc";
model = "HiWiFi HC5761";
gpio-leds {
compatible = "gpio-leds";
system {
label = "hc5761:blue:system";
gpios = <&gpio0 9 1>;
};
internet {
label = "hc5761:blue:internet";
gpios = <&gpio0 11 1>;
};
wlan2g {
label = "hc5761:blue:wlan2g";
gpios = <&gpio3 0 1>;
};
wlan5g {
label = "hc5761:blue:wlan5g";
gpios = <&gpio0 7 1>;
};
};
};

View File

@ -0,0 +1,92 @@
/dts-v1/;
/include/ "HC5XXX.dtsi"
/ {
compatible = "HC5861", "ralink,mt7620a-soc";
model = "HiWiFi HC5861";
ethernet@10100000 {
status = "okay";
mtd-mac-address = <&factory 0x4>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
ralink,port-map = "wllll";
port@4 {
status = "okay";
phy-handle = <&phy4>;
phy-mode = "rgmii";
};
port@5 {
status = "okay";
phy-handle = <&phy5>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "rgmii";
};
};
};
gsw@10110000 {
ralink,port4 = "gmac";
};
gpio-leds {
compatible = "gpio-leds";
system {
label = "hc5861:blue:system";
gpios = <&gpio0 9 1>;
};
wlan2g {
label = "hc5861:blue:wlan2g";
gpios = <&gpio0 11 1>;
};
internet {
label = "hc5861:blue:internet";
gpios = <&gpio3 0 1>;
};
wlan5g {
label = "hc5861:blue:wlan5g";
gpios = <&gpio0 7 1>;
};
turbo {
label = "hc5861:blue:turbo";
gpios = <&gpio0 10 1>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usbpower {
gpio-export,name = "usbpower";
gpio-export,output = <0>;
gpios = <&gpio0 13 0>;
};
sdpower {
gpio-export,name = "sdpower";
gpio-export,output = <0>;
gpios = <&gpio0 8 0>;
};
};
};

View File

@ -0,0 +1,143 @@
/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200";
};
palmbus@10000000 {
sysc@0 {
ralink,gpiomux = "i2c", "jtag";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
gpio2: gpio@660 {
status = "okay";
};
gpio3: gpio@688 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q128";
reg = <0 0>;
linux,modalias = "m25p80", "w25q128";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xf80000>;
};
partition@fd0000 {
label = "hwf_config";
reg = <0xfd0000 0x10000>;
};
bdinfo: partition@fe0000 {
label = "bdinfo";
reg = <0xfe0000 0x10000>;
};
partition@ff0000 {
label = "backup";
reg = <0xff0000 0x10000>;
};
};
};
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
ralink,port-map = "wllll";
};
sdhci@10130000 {
status = "okay";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
pcie@10140000 {
status = "okay";
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "uartf", "wled", "nd_sd";
ralink,function = "gpio";
};
pa {
ralink,group = "pa";
ralink,function = "pa";
};
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 12 1>;
linux,code = <0x198>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usbpower {
gpio-export,name = "usbpower";
gpio-export,output = <1>;
gpios = <&gpio0 13 0>;
};
};
};