lantiq: add support for Arcadyan ARV7519PW

This patch adds almost full support for this board.

- WiFi is still not working
- USB will not power up. According to some reports, it may be a passive port

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40319
This commit is contained in:
John Crispin 2014-03-30 09:16:15 +00:00
parent 3a43738e21
commit e733242a23
5 changed files with 238 additions and 1 deletions

View File

@ -29,7 +29,7 @@ case "$FIRMWARE" in
"RT2860.eeprom" )
local board=$(lantiq_board_id)
case $board in
ARV7510PW22|ARV7525PW|ARV752DPW|ARV752DPW22)
ARV7510PW22|ARV7519PW|ARV7525PW|ARV752DPW|ARV752DPW22)
rt2x00_eeprom_extract "board_config" 1040 512
;;
*)

View File

@ -74,6 +74,15 @@ ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22)
ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
;;
# rtl8306g
ARV7519PW)
lan_mac=$(mtd_get_mac_binary board_config 22)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t"
;;
WBMR)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"

View File

@ -0,0 +1,213 @@
/dts-v1/;
/include/ "danube.dtsi"
/ {
model = "ARV7519PW - Astoria Networks";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xf80000>;
};
partition@fe0000 {
label = "board_config";
reg = <0xfe0000 0x20000>;
read-only;
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0xfe0016 0x6>;
mac-increment = <2>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,pull = <0>;
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
switch_rst {
lantiq,pins = "io19";
lantiq,pull = <2>;
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
};
/* warning: passive port
only works with active devices */
ifxhcd@E101000 {
status = "okay";
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 0>;
req-mask = <0xf>;
};
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 11 1>;
linux,code = <0xf7>;
};
reset {
label = "reset";
gpios = <&gpio 28 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "power";
gpios = <&gpio 2 1>;
default-state = "off";
};
power2 {
label = "power2";
gpios = <&gpio 14 1>;
};
online {
label = "online";
gpios = <&gpio 3 1>;
};
online2 {
label = "online2";
gpios = <&gpio 30 1>;
};
wifi {
label = "wifi";
gpios = <&gpio 12 1>;
};
wifi2 {
label = "wifi2";
gpios = <&gpio 10 1>;
};
wifi3 {
label = "wifi3";
gpios = <&gpio 6 1>;
};
voice {
label = "voice";
gpios = <&gpio 31 1>;
};
wps {
label = "wps";
gpios = <&gpio 15 1>;
};
wps2 {
label = "wps2";
gpios = <&gpio 7 1>;
};
wps3 {
label = "wps3";
gpios = <&gpio 23 1>;
};
dsl {
label = "dsl";
gpios = <&gpio 4 1>;
};
lan {
label = "lan";
gpios = <&gpio 1 1>;
};
tv {
label = "tv";
gpios = <&gpio 20 1>;
};
upgrade {
label = "upgrade";
gpios = <&gpio 29 1>;
};
};
/* is there another way to "reserve" the GPIO? */
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
switch {
gpio-export,name = "switch";
gpio-export,output = <1>;
gpios = <&gpio 19 0>;
};
};
};

View File

@ -269,6 +269,9 @@ Image/Build/Profile/ARV7510PW22=$(call Image/Build/$(1),$(1),ARV7510PW22)
Image/BuildKernel/Profile/ARV7518PW=$(call Image/BuildKernel/Template,ARV7518PW)
Image/Build/Profile/ARV7518PW=$(call Image/Build/$(1),$(1),ARV7518PW)
Image/BuildKernel/Profile/ARV7519PW=$(call Image/BuildKernel/Template,ARV7519PW)
Image/Build/Profile/ARV7519PW=$(call Image/Build/$(1),$(1),ARV7519PW)
Image/BuildKernel/Profile/ARV752DPW=$(call Image/BuildKernel/Template,ARV752DPW)
Image/Build/Profile/ARV752DPW=$(call Image/Build/$(1),$(1),ARV752DPW)

View File

@ -92,6 +92,18 @@ endef
$(eval $(call Profile,ARV7518PW))
define Profile/ARV7519PW
NAME:=Astoria - ARV7519PW
PACKAGES:=kmod-ltq-hcd-danube kmod-ledtrig-usbdev \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-rt2800-pci wpad-mini \
swconfig
endef
$(eval $(call Profile,ARV7519PW))
define Profile/ARV4520PW
NAME:=Easybox 800, WAV-281 - ARV4520PW
PACKAGES:=kmod-ltq-hcd-danube kmod-ledtrig-usbdev \