ramips: Update ARC Freestation profile

These devices are actually built around the 8devices Carambola dev board.

ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History

Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.

- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
  actually reports itself as being an RT3350 while still having
  RT3050F markings.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36564
This commit is contained in:
John Crispin 2013-05-06 16:45:35 +00:00
parent 4f1ff28f08
commit eddd7f5773
3 changed files with 45 additions and 4 deletions

View File

@ -129,7 +129,6 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "2" "0t 5"
;;
freestation5 | \
wcr-150gn)
ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
;;
@ -255,6 +254,7 @@ ramips_setup_macs()
all0239-3g | \
carambola | \
freestation5 | \
w502u | \
wnce2001)
lan_mac=$(mtd_get_mac_binary factory 40)

View File

@ -3,13 +3,25 @@
/include/ "rt3050.dtsi"
/ {
compatible = "FREESTATION5", "ralink,rt3052-soc";
compatible = "FREESTATION5", "ralink,rt3050-soc";
model = "ARC FreeStation5";
chosen {
bootargs = "console=ttyS0,115200";
};
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
@ -49,7 +61,7 @@
esw@10110000 {
status = "okay";
ralink,portmap = <0x3e>;
ralink,portmap = <0x01>;
};
wmac@10180000 {
@ -59,4 +71,33 @@
otg@101c0000 {
status = "okay";
};
gpio-export {
compatible = "gpio-export";
// Used to enable power-over-ethernet passthrough from port0 to port1.
// Disable passthrough by default to prevent accidental equipment damage.
poe {
gpio-export,name = "poe-passthrough";
gpio-export,output = <1>; // OUT_INIT_HIGH
gpios = <&gpio0 11 1>; // GPIO 11, ACTIVE_LOW
};
};
gpio-leds {
compatible = "gpio-leds";
// The following leds are defined in the ArcOS firmware, but reportedly
// not present in the Freestation5 device.
wifi {
label = "freestation:unknown:wifi";
gpios = <&gpio0 7 1>;
};
powerg {
label = "freestation:unknown:powerg";
gpios = <&gpio0 9 1>;
};
usb {
label = "freestation:unknown:usb";
gpios = <&gpio0 14 1>;
};
};
};

View File

@ -12,7 +12,7 @@ define Profile/FREESTATION5
endef
define Profile/FREESTATION5/Description
Package set for ARC Flex FreeStation5
Package set for ARC FreeStation, Flex mARC, iFlex, and SplitStation
endef
$(eval $(call Profile,FREESTATION5))