improve MZK-W300NH support (thanks to Kazuki Shimada for the board)

SVN-Revision: 16340
This commit is contained in:
Gabor Juhos 2009-06-04 18:18:36 +00:00
parent 723678f740
commit f3c3e2772f
2 changed files with 92 additions and 3 deletions

View File

@ -22,6 +22,9 @@ ar71xx_board_name() {
*MZK-W04NU)
name="mzk-w04nu"
;;
*MZK-W300NH)
name="mzk-w300nh"
;;
*PB42)
name="pb42"
;;

View File

@ -14,6 +14,7 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
@ -21,6 +22,18 @@
#include "devices.h"
#define MZK_W300NH_GPIO_LED_STATUS 1
#define MZK_W300NH_GPIO_LED_WPS 3
#define MZK_W300NH_GPIO_LED_WLAN 6
#define MZK_W300NH_GPIO_LED_AP 15
#define MZK_W300NH_GPIO_LED_ROUTER 16
#define MZK_W300NH_GPIO_BTN_APROUTER 5
#define MZK_W300NH_GPIO_BTN_WPS 12
#define MZK_W300NH_GPIO_BTN_RESET 21
#define MZK_W04NU_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition mzk_w300nh_partitions[] = {
{
@ -33,7 +46,7 @@ static struct mtd_partition mzk_w300nh_partitions[] = {
.offset = 0x040000,
.size = 0x010000,
} , {
.name = "uImage",
.name = "kernel",
.offset = 0x050000,
.size = 0x160000,
} , {
@ -70,11 +83,84 @@ static struct spi_board_info mzk_w300nh_spi_info[] = {
}
};
static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
{
.name = "mzk-w300nh:green:status",
.gpio = MZK_W300NH_GPIO_LED_STATUS,
.active_low = 1,
}, {
.name = "mzk-w300nh:blue:wps",
.gpio = MZK_W300NH_GPIO_LED_WPS,
.active_low = 1,
}, {
.name = "mzk-w300nh:green:wlan",
.gpio = MZK_W300NH_GPIO_LED_WLAN,
.active_low = 1,
}, {
.name = "mzk-w300nh:green:ap",
.gpio = MZK_W300NH_GPIO_LED_AP,
.active_low = 1,
}, {
.name = "mzk-w300nh:green:router",
.gpio = MZK_W300NH_GPIO_LED_ROUTER,
.active_low = 1,
}
};
static struct gpio_button mzk_w300nh_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = BTN_0,
.threshold = 5,
.gpio = MZK_W300NH_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = BTN_1,
.threshold = 5,
.gpio = MZK_W300NH_GPIO_BTN_WPS,
.active_low = 1,
}, {
.desc = "aprouter",
.type = EV_KEY,
.code = BTN_2,
.threshold = 5,
.gpio = MZK_W300NH_GPIO_BTN_APROUTER,
.active_low = 0,
}
};
static void __init mzk_w300nh_setup(void)
{
ar71xx_add_device_spi(NULL, mzk_w300nh_spi_info,
ARRAY_SIZE(mzk_w300nh_spi_info));
u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.has_ar8216 = 1;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_spi(NULL, mzk_w300nh_spi_info,
ARRAY_SIZE(mzk_w300nh_spi_info));
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
mzk_w300nh_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(mzk_w300nh_gpio_buttons),
mzk_w300nh_gpio_buttons);
ar91xx_add_device_wmac();
}