ar71xx: add support for TL-WR802N Version 2

This patch adds support for the TP-Link TL-WR802N Version 2.

Specification:
- SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc)
- RAM: 32 MiB
- Storage: 4 MiB of FLash on board
- Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n
- Ethernet: 1x100M (port0)

Installation through OEM Web Interface:
- Connect to TL-WR802N by Ethernet or Wi-Fi
- Go to http://192.168.0.1 (default user is "admin" & password is "admin)
- Go to "System Tools -> Firmware Upgrade"
- Browse for firmware "*.factory-us.bin" or  "*.factory-eu.bin" for eu model
- Click upgrade

Installation through tftp:
Note: T_OUT, T_IN and GND on the board must be connected to USB TTL
      Serial Configuration 115200 8n1

- Boot the TL-WR802N
- When "Autobooting in 1 seconds" appears type "tpl" followed by enter
- Connect to the board Ethernet port
    (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10)
- tftpboot 0x80000000 <Firmware Image Name>
- Record the result of "printenv bootcmd"
- Enter "erase <Result of 'printenv bootcmd'> +0x3c0000"
    (e.g erase 0x9f020000 +0x3c0000)
- Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000"
    (e.g cp.b 0x80000000 0x9f020000 0x3c0000)
- Enter "bootm <Result of 'printenv bootcmd'>"
    (e.g bootm 0x9f020000)

Signed-off-by: Thomas Roberts <tom.p.roberts@gmail.com>
This commit is contained in:
Thomas Roberts 2017-02-13 17:29:34 +00:00 committed by John Crispin
parent 7c9f5c7e6b
commit f9278337cf
12 changed files with 136 additions and 2 deletions

View File

@ -667,6 +667,9 @@ tl-wpa8630)
tl-wr802n-v1)
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt"
;;
tl-wr802n-v2)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:system" "phy0tpt"
;;
tl-wr940n-v4|\
tl-wr941nd-v6)
ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0"

View File

@ -116,6 +116,7 @@ ar71xx_setup_interfaces()
tl-wa901nd-v4|\
tl-wr703n|\
tl-wr802n-v1|\
tl-wr802n-v2|\
tube2h|\
unifiac-lite|\
wndap360|\

View File

@ -26,6 +26,7 @@ get_status_led() {
minibox-v1|\
som9331|\
sr3200|\
tl-wr802n-v2|\
xd3200)
status_led="$board:green:system"
;;

View File

@ -220,6 +220,10 @@ tplink_board_detect() {
;;
"080200"*)
model="TP-Link TL-WR802N"
if [ "$hwid" = '08020002' -a "$mid" = '00000002' ]; then
hwver=' v2'
fi
;;
"083000"*)
model="TP-Link TL-WA830RE"
@ -1031,6 +1035,9 @@ ar71xx_board_detect() {
*"TL-WR802N v1")
name="tl-wr802n-v1"
;;
*"TL-WR802N v2")
name="tl-wr802n-v2"
;;
*TL-WA901ND)
name="tl-wa901nd"
;;

View File

@ -430,6 +430,7 @@ platform_check_image() {
tl-wr741nd-v4|\
tl-wr741nd|\
tl-wr802n-v1|\
tl-wr802n-v2|\
tl-wr810n|\
tl-wr841n-v11|\
tl-wr841n-v1|\

View File

@ -193,6 +193,7 @@ CONFIG_ATH79_MACH_TL_WR720N_V3=y
CONFIG_ATH79_MACH_TL_WR741ND=y
CONFIG_ATH79_MACH_TL_WR741ND_V4=y
CONFIG_ATH79_MACH_TL_WR802N_V1=y
CONFIG_ATH79_MACH_TL_WR802N_V2=y
CONFIG_ATH79_MACH_TL_WR810N=y
CONFIG_ATH79_MACH_TL_WR841N_V1=y
CONFIG_ATH79_MACH_TL_WR841N_V8=y

View File

@ -1533,6 +1533,14 @@ config ATH79_MACH_TL_WR802N_V1
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
config ATH79_MACH_TL_WR802N_V2
bool "TP-LINK TL-WR802N v2 support"
select SOC_QCA953X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
config ATH79_MACH_TL_WR810N
bool "TP-LINK TL-WR810N support"
select SOC_QCA953X

View File

@ -198,6 +198,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o
obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o
obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
obj-$(CONFIG_ATH79_MACH_TL_WR802N_V1) += mach-tl-wr802n.o
obj-$(CONFIG_ATH79_MACH_TL_WR802N_V2) += mach-tl-wr802n-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WR810N) += mach-tl-wr810n.o
obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o

View File

@ -0,0 +1,97 @@
/*
* TP-LINK TL-WR802N v2
*
* Copyright (C) 2016 Thomas Roberts <tom.p.roberts@gmail.com <mailto:tom.p.roberts@gmail.com>>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define TL_WR802N_V2_GPIO_LED_SYSTEM 13
#define TL_WR802N_V2_GPIO_BTN_RESET 11
#define TL_WR802N_V2_KEYS_POLL_INTERVAL 20 /* msecs */
#define TL_WR802N_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR802N_V2_KEYS_POLL_INTERVAL)
static const char *tl_wr802n_v2_part_probes[] = {
"tp-link",
NULL,
};
static struct flash_platform_data tl_wr802n_v2_flash_data = {
.part_probes = tl_wr802n_v2_part_probes,
};
static struct gpio_led tl_wr802n_v2_leds_gpio[] __initdata = {
{
.name = "tl-wr802n-v2:green:system",
.gpio = TL_WR802N_V2_GPIO_LED_SYSTEM,
.active_low = 1,
},
};
static struct gpio_keys_button tl_wr802n_v2_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = TL_WR802N_V2_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WR802N_V2_GPIO_BTN_RESET,
.active_low = 0,
}
};
static void __init tl_ap143_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
u8 tmpmac[ETH_ALEN];
ath79_register_m25p80(&tl_wr802n_v2_flash_data);
ath79_setup_ar933x_phy4_switch(false, false);
ath79_register_mdio(0, 0x0);
/* LAN */
ath79_switch_data.phy4_mii_en = 1;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.phy_mask = BIT(4);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
ath79_register_eth(0);
ath79_init_mac(tmpmac, mac, 0);
ath79_register_wmac(ee, tmpmac);
};
static void __init tl_wr802n_v2_setup(void)
{
tl_ap143_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr802n_v2_leds_gpio),
tl_wr802n_v2_leds_gpio);
ath79_register_gpio_keys_polled(1, TL_WR802N_V2_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wr802n_v2_gpio_keys),
tl_wr802n_v2_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_TL_WR802N_V2, "TL-WR802N-v2", "TP-LINK TL-WR802N v2",
tl_wr802n_v2_setup);

View File

@ -237,6 +237,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4 */
ATH79_MACH_TL_WR802N_V1, /* TP-LINK TL-WR802N v1 */
ATH79_MACH_TL_WR802N_V2, /* TP-LINK TL-WR802N v2 */
ATH79_MACH_TL_WR810N, /* TP-LINK TL-WR810N */
ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
ATH79_MACH_TL_WR841N_V11, /* TP-LINK TL-WR841N/ND v11 */

View File

@ -631,12 +631,24 @@ TARGET_DEVICES += tl-wr740n-v1 tl-wr740n-v3 tl-wr740n-v4 tl-wr740n-v5 tl-wr740n-
define Device/tl-wr802n-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR802N v1
BOARDNAME := TL-WR802N-v1
BOARDNAME := TL-WR802N-v1
DEVICE_PROFILE := TLWR802
TPLINK_HWID := 0x08020001
TPLINK_HWREV := 1
endef
TARGET_DEVICES += tl-wr802n-v1
define Device/tl-wr802n-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR802N v2
BOARDNAME := TL-WR802N-v2
DEVICE_PROFILE := TLWR802
TPLINK_HWID := 0x08020002
TPLINK_HWREV := 2
IMAGES += factory-us.bin factory-eu.bin
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += tl-wr802n-v1 tl-wr802n-v2
define Device/tl-wr841-v1.5
$(Device/tplink-4m)

View File

@ -158,6 +158,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
# CONFIG_ATH79_MACH_TL_WR741ND is not set
# CONFIG_ATH79_MACH_TL_WR741ND_V4 is not set
# CONFIG_ATH79_MACH_TL_WR802N_V1 is not set
# CONFIG_ATH79_MACH_TL_WR802N_V2 is not set
# CONFIG_ATH79_MACH_TL_WR810N is not set
# CONFIG_ATH79_MACH_TL_WR841N_V1 is not set
# CONFIG_ATH79_MACH_TL_WR841N_V8 is not set