183130227/tn3399_openwrt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ath79: Add support for OpenMesh OM2P v2

Browse Source 
Device specifications:
======================

* Qualcomm/Atheros AR9330 rev 1
* 400/400/200 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 1T1R 2.4 GHz Wi-Fi
* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
  - eth0
    + builtin switch port 1
    + used as LAN interface
  - eth1
    + 18-24V passive POE (mode B)
    + used as WAN interface
* 12-24V 1A DC
* external antenna

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to
the device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>
This commit is contained in:
Sven Eckelmann 2020-11-23 13:41:34 +01:00 committed by Adrian Schmutzler
parent eb3a5ddba0
commit ff9e48e75c
6 changed files with 21 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
package/boot/uboot-envtools/Makefile
View File

@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
PKG_NAME:=uboot-envtools
PKG_DISTNAME:=u-boot
PKG_VERSION:=2020.04
PKG_RELEASE:=15
PKG_RELEASE:=16
PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:= \

1
package/boot/uboot-envtools/files/ath79
View File

@ -85,6 +85,7 @@ netgear,wndr4300tn|\
netgear,wndr4300sw)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x20000"
;;
openmesh,om2p-v2|\
openmesh,om2p-v4|\
openmesh,om2p-hs-v1|\
openmesh,om2p-hs-v2|\

8
target/linux/ath79/dts/ar9330_openmesh_om2p-v2.dts Normal file
View File

@ -0,0 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9330_openmesh_om2p.dtsi"
/ {
compatible = "openmesh,om2p-v2", "qca,ar9330";
model = "OpenMesh OM2P v2";
};

1
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@ -145,6 +145,7 @@ comfast,cf-e560ac)
ucidef_set_led_switch "lan4" "LAN4" "blue:lan4" "switch0" "0x10"
;;
comfast,cf-ew72|\
openmesh,om2p-v2|\
openmesh,om2p-hs-v1|\
openmesh,om2p-hs-v2|\
openmesh,om2p-hs-v3|\

1
target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
View File

@ -50,6 +50,7 @@ platform_do_upgrade() {
jjplus,ja76pf2)
redboot_fis_do_upgrade "$1" linux
;;
openmesh,om2p-v2|\
openmesh,om2p-v4|\
openmesh,om2p-hs-v1|\
openmesh,om2p-hs-v2|\

9
target/linux/ath79/image/generic.mk
View File

@ -1568,6 +1568,15 @@ define Device/openmesh_om2p-common
openmesh-image ce_type=OM2P | append-metadata
endef
define Device/openmesh_om2p-v2
$(Device/openmesh_om2p-common)
SOC := ar9330
DEVICE_MODEL := OM2P
DEVICE_VARIANT := v2
SUPPORTED_DEVICES += om2pv2
endef
TARGET_DEVICES += openmesh_om2p-v2
define Device/openmesh_om2p-v4
$(Device/openmesh_om2p-common)
SOC := qca9533