Commit Graph

162 Commits

Author SHA1 Message Date
John Audia
7bf62e2451 kernel: bump 5.4 to 5.4.169
All patches automatically rebased.

Build system: x86_64
Build-tested: ramips/mt7621*

*Had to revert 7f1edbd in order to build due to FS#4149

Signed-off-by: John Audia <graysky@archlinux.us>
2022-01-03 01:00:03 +01:00
Sander Vanheule
ebc0ce118f realtek: netgear-gs110tpp: Add system LEDs
The GS110TPP has an RGB LED used for system status indication. Expose
all three components as separate GPIO LEDs connected via the device's
RTL8231.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2021-12-27 13:51:41 +01:00
Sander Vanheule
c88124cfc4 realtek: netgear-gigabit: Enable RTL8231
Since the move to 5.10, there are now two GPIO drivers. The gpio0 node
refers to the internal GPIOs, so the indirect-access-bus-id is no longer
relevant for that node.

Set indirect-access-bus-id to the correct value (31) on the correct node
(gpio1) and enable the device.

Cc: Raylynn Knight <rayknight@me.com>
Cc: Michael Mohr <akihana@gmail.com>
Cc: Stijn Segers <foss@volatilesystems.org>
Cc: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Bjørn Mork <bjorn@mork.no>
2021-12-27 13:51:41 +01:00
Sergey Ryazanov
fa3690f8f1 kernel: 5.10: consolidate mac80211 crypto options
Each of
- CRYPTO_AEAD2
- CRYPTO_AEAD
- CRYPTO_GF128MUL
- CRYPTO_GHASH
- CRYPTO_HASH2
- CRYPTO_HASH
- CRYPTO_MANAGER2
- CRYPTO_MANAGER
- CRYPTO_NULL2

either directly required for mac80211 crypto support, or directly
selected by such options. Support for the mac80211 crypto was enabled in
the generic config since c7182123b9 ("kernel: make cryptoapi support
needed by mac80211 built-in"). So move the above options from the target
configs to the generic config to make it clear why do we need them.

CC: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2021-12-17 16:16:34 +01:00
Sergey Ryazanov
b61ab8f57e kernel: filter out both Clang and LLD versions
Both CLANG_VERSION and LLD_VERISON are autogenerated runtime
configuration options, so add them to the kernel configuration filter
and remove from generic and per-target configs to keep configs clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2021-12-17 16:16:34 +01:00
John Audia
43c0a12665 kernel: bump 5.10 to 5.10.85
Removed target for patch which does not exist:
    bcm27xx/patches-5.10/950-0249-kbuild-Disable-gcc-plugins.patch

All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, ipq806x/R7800*
Run-tested: bcm2711/RPi4B, ipq806x/R7800*

* Had to revert 7f1edbd412 in order to build
  (binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149)

Signed-off-by: John Audia <graysky@archlinux.us>
2021-12-17 15:10:22 +01:00
John Audia
6c945fa379 kernel: bump 5.10 to 5.10.83
Removed upstreamed:
    bcm53xx/patches-5.10/033-v5.16-0024-ARM-dts-BCM5301X-Fix-I2C-controller-interrupt.patch[1]
    bcm53xx/patches-5.10/033-v5.16-0025-ARM-dts-BCM5301X-Add-interrupt-properties-to-GPIO-no.patch[2]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=b2cd6fdcbe0a5cb44e4610a08cc58261d494a885
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=9db1d4a3c2700e1cc84c3d61199411d75c2a3ec6

Build system: x86_64*
Build-tested: bcm2711/RPi4B, ipq806x/R7800†
Run-tested: bcm2711/RPi4B, ipq806x/R7800†

* Had to revert 7c99085bd6 in order to build
  (latest bump of ca-certificates)

† Had to revert 7f1edbd412 in order to build
  (binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149)

Signed-off-by: John Audia <graysky@archlinux.us>
2021-12-12 21:11:30 +01:00
Bjørn Mork
afeda4a3d3 realtek: sort the port list numerically
Mac adresses are assigned in the order given by the port list.  The
interfaces are also brought up in this order.  This target supports
devices with up to 52 ports.  Sorting these alphabetically is very
confusing, and assigning mac addresses in alphabetic order does not
match stock firmware behaviour.

Suggested-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-12-05 18:49:14 +01:00
Sander Vanheule
4304799b4a realtek: update watchdog timer patch
The Realtek Otto watchdog timer driver was accepted upstream, and is
queued for 5.17. Update the patch's file name, and replace by the final
version.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2021-12-05 18:49:14 +01:00
Sander Vanheule
22f85d63cf realtek: netgear-gigabit: Add gpio-restart node
The Netgear GS110TPP v1 switch cannot reliably perform cold reboots
using the system's internal reset controller.

On this device, and the other supported Netgear switches, internal GPIO
line 13 is connected to the system's hard reset logic. Expose this GPIO
on all systems to ensure restarts work properly.

Cc: Raylynn Knight <rayknight@me.com>
Cc: Michael Mohr <akihana@gmail.com>
Cc: Stijn Segers <foss@volatilesystems.org>
Cc: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Bjørn Mork <bjorn@mork.no>
2021-11-28 22:43:08 +01:00
Sander Vanheule
3f4d6da453 realtek: Enable gpio-restart driver
Add the gpio-restart driver to the realtek build. This way devices,
which cannot reliably perform resets using the SoC's internal reset
logic, can use a GPIO line to drive the SoC's hard reset input.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2021-11-28 22:43:08 +01:00
Sander Vanheule
fa71139776 realtek: add missing GPIO irq properties
The internal GPIO controller on RTL838x is also an IRQ controller, which
requires the 'interrupt-controller' and '#interrupts-cells' properties
to be present in the device tree.

Reported-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2021-11-28 22:43:08 +01:00
Bjørn Mork
d1464afe1b realtek: use full range of assigned MAC addresses
Some devices are assigned globally unique MAC addresses for all
ports. These are stored by U-Boot in the second U-Boot enviroment
("sysinfo") as a range of start and end address.

Use the full range if provided.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-11-28 22:43:08 +01:00
Bjørn Mork
9e7149f729 realtek: revert to "standard" management configuration
The default management interface should be easy to find for users
doing "blind" installations without console access.  There are
already multiple examples in the forum of advanced early adopters
having problems locating the management interface after installing
OpenWrt.

Requiring tagged VLAN configration to access the initial management
interface creates unnecessary hassle at best. Errors on the other
end are close to impossible to debug without console access, even
for advanced users.  Less advanced users might have problems with
the concept of VLAN tagging.

Limiting management access to a single arbitrary port among up to
52 possible LAN ports makes this even more difficult, for no
reason at all. Users might have reasons to use a different port
for management.  And they might even have difficulties using the
OpenWrt selected one. The port might be the wrong type for their
management link (e.g copper instead of fibre).  Or they might
depend on PoE power from a device which they can't reconfigure.

User expectations will be based on
- OpenWrt defaults for other devices
- stock firmware default for the device in question
- common default behaviour of similar devices

All 3 cases point to a static IP address accessible on the native
VLAN of any LAN port.  A switch does not have any WAN port.  All
ports are LAN ports.

This changes the default network configuration in line with these
expectations.

Cc: John Crispin <john@phrozen.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-11-28 22:33:57 +01:00
John Audia
81995a5e77 kernel: bump 5.4 to 5.4.162
All patches automatically rebased.

Build system: x86_64
Build-tested: ramips/mt7621*

*I am hit with the binutils 2.37 bug so I had to revert 7f1edbd412
in order to downgrade to 2.35.1

Signed-off-by: John Audia <graysky@archlinux.us>
2021-11-28 16:32:45 +01:00
John Audia
bbdc13b15b kernel: bump 5.4 to 5.4.161
Removed upstreamed:
    ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch[1]

Manually rebased:
    layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch
    octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch

All other patches automatically rebased.

1. Private email exchange with patch author, Hauke Mehrtens

Signed-off-by: John Audia <graysky@archlinux.us>
2021-11-28 16:32:45 +01:00
John Audia
894f483d20 kernel: bump 5.10 to 5.10.82
Removed upstreamed:
    bcm53xx/patches-5.10/033-v5.16-0014-ARM-dts-NSP-Fix-mpcore-mmc-node-names.patch

Manually rebased:
    ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, ipq806x/R7800
Run-tested: bcm2711/RPi4B, ipq806x/R7800

Signed-off-by: John Audia <graysky@archlinux.us>
2021-11-27 19:19:30 +01:00
Sander Vanheule
f8b2bc550b realtek: Remove _machine_restart and _machine_halt
By dropping _machine_restart, users can provide more reliable or
device-specific restart modes.

_machine_halt was already removed in commit f4b687d1f0 ("realtek: use
kernel defined halt"), but quietly reintroduced in commit 8faffa00cb
("realtek: add support for the RTL9300 timer"). Let's remove it again.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-11-24 21:43:56 +02:00
Sander Vanheule
927570f0a3 realtek: Add and enable watchdog node
Add and enable the Realtek Otto WDT peripheral found on these SoCs.

Default all devices to use standard (cold) reboot and "soc" resets.

Devices that require the PLL value fixup before restarting, should pick
the "cpu" or "software" reset mode. These devices also need to provide a
custom reboot mode, by adding the reboot argument to the kernel command
line:

    WDT reset mode  | kernel reboot mode
    ----------------+---------------------------------------
    soc             | reboot=cold (default if not specified)
    cpu             | reboot=warm
    software        | reboot=software

Preferrably, these devices should use an alternative restart method like
gpio-restart to provide reliable restarts.

Note that watchdog restarts are not yet exposed, since the
_machine_restart override is still present.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-11-24 21:43:42 +02:00
Sander Vanheule
b8fc5eecdc realtek: Backport Realtek Otto WDT driver
Add patch submitted upstream to linux-watchdog and replace the MIPS
architecture symbols. Requires one extra patch for the DIV_ROUND_*
macros, which have moved to a different header since 5.10.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-11-24 21:43:21 +02:00
Sander Vanheule
d3a62bea08 realtek: Add Lexra bus clock
The CPU peripherals on RTL83xx/RTL930x are connected to the CPU via the
Lexra bus. This bus can provide a clock signal to these peripherals, but
no clock driver is currently available. Instead, use a fixed-clock to
provide the clock frequency, and update the dependent peripherals.

Lexra bus clock frequencies:
- RTL838x: 200MHz
- RTL839x: 200MHz
- RTL930x: 175MHz

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-11-24 21:42:56 +02:00
Sander Vanheule
af2cfbda2b realtek: Consolidate bootargs
All current devices use identical bootargs, so let's move that to the
common devicetree includes.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-11-24 21:42:44 +02:00
Sander Vanheule
72ae8314f5 realtek: reset both ethernet NIC and queues
Recent versions of Realtek's SDK reset both the ethernet NIC and queues
(SW_NIC_RST and SW_Q_RST bits) when initialising the hardware.

Furthermore, when issuing a CPU reset on the Zyxel GS1900-8 (not
supported by any current driver), the networking part of the SoC is not
reset. This leads to unresponsive network after the restart. By
resetting both the ethernet NIC and queues, networking always comes up
reliably.

Suggested-by: Birger Koblitz <mail@birger-koblitz.de>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-11-24 21:38:43 +02:00
Rui Salvaterra
3ae5da5adc kernel: bump 5.10 to 5.10.80
Deleted (upstreamed):
ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch [1]
bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch [2]
lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch [3]
lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch [4]
lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch [5]
lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch [6]

Manually rebased:
ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=47462c5e600fbaffd755cd13dedd80d04e41ff83
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=2fde76df1885a6bec04317e457121326070450eb
[3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=9b366f5221d8aa64b22f35be137a5749326444ce
[4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=5af57ce8a6155fe3e4270d28d171abf8903bebc0
[5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=b92a5df2c7adc79a57481445f67de0c1c716581f
[6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=6b72caabc47011d03f44064452b2c65e8ed18326

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-11-19 09:40:29 +00:00
Sander Vanheule
c735d2e218 realtek: backport GPIO IRQ index fix
Backport the patch queued upstream for 5.16. The patch differs slightly
from the upstream patch due to an upstream change that added a
convenience function.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2021-11-01 00:56:51 +01:00
Rui Salvaterra
02026d0a6f kernel: bump 5.10 to 5.10.76
Deleted (upstreamed):
bcm27xx/patches-5.10/950-0145-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch [1]

Manually rebased:
bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch
bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch

Note: although automatically rebaseable, the last patch has been edited to avoid
conflicting bit definitions.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=b6f32897af190d4716412e156ee0abcc16e4f1e5

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-10-30 21:17:20 +02:00
Bjørn Mork
d990f805c0 realtek: re-enable IPv6 routing
Commit 03e1d93e07 ("realtek: add driver support for routing
offload") added routing offload for IPv4, but broke IPv6 routing
completely.  The routing table is empty and cannot be updated:

 root@gs1900-10hp:~# ip -6 route
 root@gs1900-10hp:~# ip -6 route add unreachable default
 RTNETLINK answers: Invalid argument

As a side effect, this breaks opkg on IPv4 only systems too,
since uclient-fetch fails when there are no IPv6 routes:

 root@gs1900-10hp:~# uclient-fetch http://192.168.99.1
 Downloading 'http://192.168.99.1'
 Failed to send request: Operation not permitted

Fix by returning NOTIFY_DONE when offloading is unsupported, falling
back to default behaviour.

Fixes: 03e1d93e07 ("realtek: add driver support for routing offload")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-10-30 15:00:22 +02:00
Bjørn Mork
daefc646e6 realtek: fix ZyXEL initramfs image generation
The current rule produces empty trailers, causing the OEM firmware
update application to reject our images.

The double expansion of a makefile variable does not work inside
shell code.  The second round is interpreted as a shell expansion,
attempting to run the command ZYXEL_VERS instead of expanding the
$(ZYXEL_VERS) makefile variable.

Fix by removing one level of variable indirection.

Fixes: c6c8d597e1 ("realtek: Add generic zyxel_gs1900 image definition")
Tested-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-10-30 15:00:22 +02:00
Rui Salvaterra
d4f0e45f90 kernel: bump 5.10 to 5.10.75
Deleted (upstreamed):
bcm27xx/patches-5.10/950-0735-xhci-guard-accesses-to-ep_state-in-xhci_endpoint_res.patch [1]

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=dc3e0a20dbb9dbaa22f4a33dea34230f8c663c40

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-10-21 00:17:36 +02:00
Rui Salvaterra
72e53eb133 kernel: bump 5.10 to 5.10.74
Patches automatically refreshed.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-10-21 00:17:36 +02:00
John Audia
0ea33e5363 kernel: bump 5.4 to 5.4.155
All patches automatically rebased.

Signed-off-by: John Audia <graysky@archlinux.us>
2021-10-21 00:17:36 +02:00
John Audia
3d0499bcdb kernel: bump 5.4 to 5.4.154
All patches automatically rebased.

Signed-off-by: John Audia <graysky@archlinux.us>
2021-10-21 00:17:36 +02:00
Adrian Schmutzler
352427ecec realtek: switch to kernel 5.10
The usual testers did their tests. Now we need testers who use the
master builds.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-20 23:27:52 +02:00
John Audia
e672d1b387 kernel: bump 5.10 to 5.10.72
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B
Run-tested: bcm2711/RPi4B

Signed-off-by: John Audia <graysky@archlinux.us>
2021-10-10 00:09:22 +01:00
Birger Koblitz
cda0460ad3 realtek: add legacy realtek GPIO driver for rtl9300 support
The otto GPIO driver does not work with rtl9300 SoCs. Add
the legacy driver again and use that by default in the 9300 .dtsi

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:06 +02:00
Birger Koblitz
4c83dae801 realtek: enable Aquantia PHY support
Enables Aquantia PHY support in the kernel

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:06 +02:00
Birger Koblitz
76f60470a1 realtek: Fix bug when accessing external PHYs on SoCs older than Revision C
RTL8393 SoCs older than Revision C hang on accesses to PHYs with PHY address
larger or equal to the CPU-port (52). This will make scanning the MDIO bus
hang forever. Since the RTL8390 platform does not support more than
52 PHYs, return -EIO for phy addresses >= 52. Note that the RTL8390 family
of SoCs has a fixed mapping between port number and PHY-address.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:06 +02:00
Birger Koblitz
88936e7e82 realtek: cleanup PHY driver
Removes unnecessary output from the RTL PHY drivers.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:06 +02:00
Birger Koblitz
1cfd45ae0b realtek: Add debugfs support for RTL9300
Adds support for debugfs on RTL9300, in particular the drop counters.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:06 +02:00
Birger Koblitz
1f402512ae realtek: Add SoC-specific routing offload implementation
Adds SoC specific routing offload implementations for
RTL8380/90 and RTL9300. RTL83xx supports merely nexthop
routing, RTL9300 full host and prefix routes.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:06 +02:00
Birger Koblitz
03e1d93e07 realtek: add driver support for routing offload
Add generic support for listening to FIB and Event notifier updates and
use this information to hook into the L3 hardware capabilities of the
RTL SoCs.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:06 +02:00
Birger Koblitz
ee6f483a62 realtek: Improve MDIO bus probing for RTL9300
Improve handling of multi-gig ports on the RTL9300 when probing
the MDIO bus.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:06 +02:00
Birger Koblitz
9ae927febd realtek: Fix bug in VLAN ingress and egress filtering
The ingress filter registers use 2 bits for each port to define the filtering
state, whereas the egress filter uses 1 bit. So for for the ingress filter
the register offset for a given port is:
(port >> 4) << 4: since there are 16 entries in a register of 32 bits
and for the egress filter:
(port >> 5) << 4: since there are 32 entries in a register of 32 bits

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:06 +02:00
Birger Koblitz
28e972b2ea realtek: Configure initial L2 learning setup
Configure a sane L2 learning configuration upon DSA driver load so that the
switch can start learning L2 addresses. Also configure the correct flood masks
for broadcast and unknown unicast traffice.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:06 +02:00
Birger Koblitz
9d9bf16aa8 realtek: Add phylink configuration routines for RTL93xx
This adds RTL93xx-specific MAC configuration routines that allow also configuration
of 10GBit links for phylink. There is support for the Realtek-specific HISGMI
protocol.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:06 +02:00
Birger Koblitz
a96b73a890 realtek: Packet Inspection Engine support for RTL930x SoCs
Adds the RTL930x-specific PIE support routines.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Birger Koblitz
2d8d81fe28 realtek: Packet Inspection Engine support for RTL839x SoCs
Adds the RTL839x-specific PIE support routines.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Birger Koblitz
87b3bd07a4 realtek: Packet Inspection Engine support for RTL838x SoCs
Adds the RTL838x-specific PIE support routines.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Birger Koblitz
54805fc911 realtek: Add driver support for TC offloading
This adds support for offloading TC flower by using the Packet Inspection Engine
of the RTL-SoCs. Basic infrastructure support is provide with callbacks to the
tc subsystem and support for HW packet counters.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Birger Koblitz
a6678accbd realtek: Add port to smi-bus address mapping
All RTL SoCs addresss PHYs via their port number, which is mapped to an
SMI address. Add support for configuring this mapping via the .dts on all
SoCs apart from the 839x, where the mapping to the 64 ports is fixed.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00