Commit Graph

232 Commits

Author SHA1 Message Date
Jo-Philipp Wich
c0248183a4 ath10k-firmware: update Candela Tech firmware images
- Removed an assert from wave-1 firmware images
 - Fix three recently reported firmware crashes in wave-2 images

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-12-20 09:23:45 +01:00
Rafał Miłecki
fa211623d0 linux-firmware: broadcom: package 4366C0 FullMAC firmware
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-12-17 12:51:00 +01:00
Rafał Miłecki
8b4f6a1d2a linux-firmware: update to the commit from 2018-12-16
It includes e.g. new Broadcom FullMAC firmwares for 4366B1 and 4366C0.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-12-17 11:42:45 +01:00
Michael Yartys
cc5c63f217 ath10k-firmware: update all CT firmware variants
Wave-1 firmware (988x, 9887): bug fixes
Wave-2 firmware (4019, 9888, 99x0, 9984): fix protected management frames, rate-ctrl fixes, and performance improvements

Signed-off-by: Michael Yartys <michael.yartys@gmail.com>
2018-12-15 15:25:24 +01:00
Christian Lamparter
87af41d554 ath10k-firmware: Fix mirror hash sum (FS#1983)
This now matches what was generated locally on my PC and the file on the
mirror server.

Fixes: 575d0240f9 ("ath10k-firmware: update board-2.bin for community firmwares")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-09 15:07:02 +01:00
Steven Lin
2b4ac79a79 ipq40xx: add support for EnGenius EAP1300
SOC:    IPQ4018 / QCA Dakota
CPU:    Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
DRAM:   256 MiB
NOR:    32 MiB
ETH:    Qualcomm Atheros QCA8072
WLAN1:  Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
WLAN2:  Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
INPUT:  RESET Button
LEDS:   Power, LAN, MESH, WLAN 2.4GHz, WLAN 5GHz

1. Load Ramdisk via U-Boot

To set up the flash memory environment, do the following:
a. As a preliminary step, ensure that the board console port is connected to the PC using these RS232 parameters:
   * 115200bps
   * 8N1
b. Confirm that the PC is connected to the board using one of the Ethernet ports. Set a static ip 192.168.99.8 for Ethernet that connects to board. The PC must have a TFTP server launched and listening on the interface to which the board is connected. At this stage power up the board and, after a few seconds, press 4 and then any key during the countdown.

U-BOOT> set serverip 192.168.99.8 && set ipaddr 192.168.99.9 && tftpboot 0x84000000 openwrt.itb && bootm

2. Load image via GUI

a. Upgrade EAP1300 to FW v3.5.3.2
In the GUI, System Manager > Firmware > Firmware Upgrade, to do upgrade.
b. Transfer to OpenWrt from EnGenius.
In Firmware Upgrade page, to upgrade yours openwrt-ipq40xx-engenius_eap1300-squashfs-sysupgrade.bin.

3. Revert to EnGenius EAP1300
To flash openwrt-ipq40xx-engenius_eap1300-squashfs-factory.bin by using sysupgrade command and "DO NOT" keep configuration.
$ sysupgrade –n openwrt-ipq40xx-engenius_eap1300-squashfs-factory.bin

Signed-off-by: Steven Lin <steven.lin@senao.com>
2018-12-05 09:40:32 +01:00
John Crispin
231d9d5327 Revert "intel-microcode: create early load microcode image"
This reverts commit 022ffb56b2.

Signed-off-by: John Crispin <john@phrozen.org>
2018-11-27 18:58:37 +01:00
John Crispin
30f30d3e11 Revert "amd64-microcode: create early load microcode image"
This reverts commit 975019b3a7.

Signed-off-by: John Crispin <john@phrozen.org>
2018-11-27 18:58:33 +01:00
Tomasz Maciej Nowak
975019b3a7 amd64-microcode: create early load microcode image
Create initrd image with packed microcode. This'll allow to load it at
early boot stage.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-11-26 12:05:45 +01:00
Tomasz Maciej Nowak
022ffb56b2 intel-microcode: create early load microcode image
Create initrd image with packed microcode. This'll allow to load it at
early boot stage.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-11-26 12:05:44 +01:00
Tomasz Maciej Nowak
ad83fde30d intel-microcode: remove dependency on iucode-tool
It is not necessary to have iucode-tool present on target system to have
functional intel-microcode package. The build time dependency is kept.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-11-26 12:05:44 +01:00
Christian Lamparter
dceee8cc09 ipq-wifi: drop custom board-2.bins
The BDFs for all boards were upstreamed to the ath10k-firmware
repository and linux-firmware.git.

We switched to the upstream board-2.bin, hence the files can be removed
here.

Keep the ipq-wifi package in case new boards are added. It might take
some time till board-2.bins send upstream are merged.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-01 17:16:53 +01:00
Christian Lamparter
575d0240f9 ath10k-firmware: update board-2.bin for community firmwares
This patch updates the board-2.bin for the default
IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct
and -ct-htt firmwares.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-01 17:16:52 +01:00
Hauke Mehrtens
e1db49310e linux-firmware: intel: Add iwl 9000 and 9260 firmware
Add the most recent supported firmware file for the Intel 9000 and
9260 wireless chips. The API version 41 is not yet supported by the driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-20 16:24:29 +02:00
Hauke Mehrtens
10dffe2fa3 linux-firmware: intel: update firmware files for 7265D, 8000C and 8265
Use more recent versions for the Intel wireless chips 7265D, 8000C and 8265.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-20 16:24:29 +02:00
Robert Marko
f6a26f9a20 linux-firmware: Update linux-firmware to 2018-10-18
Kalles ath10k PR was finally merged so update linux-firmware to
include those changes.

This is needed since disabling ath10k-firmware a lot of custom BDF-s
in board-2.bin-s are not available in previously outdated linux-firmware
board-2.bin-s.
This also includes support for boards currently using ipq-wifi and other
WIP ones.

Runtime tested on 8devices Jalapeno.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2018-10-20 16:13:39 +02:00
Hauke Mehrtens
90bb790fbf intel-microcode: update to version 20180807a
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-07 02:12:06 +02:00
Daniel Golle
b88df4a7c8 linux-firmware: set PKG_MIRROR_HASH
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-09-26 16:35:33 +02:00
John Crispin
0a1faecdb5 linux-firmware: add ath10k support
Signed-off-by: John Crispin <john@phrozen.org>
2018-09-26 16:35:33 +02:00
John Crispin
9860cdda76 ath10k-firmware: disable the package and use default linux-firmware package
Signed-off-by: John Crispin <john@phrozen.org>
2018-09-26 16:35:33 +02:00
Yangbo Lu
87d7a596ec layerscape: build ls-dpl package with linux dtc tool
Building ls-dpl package requires the dtc tool. This patch
is to support using linux dtc tool for ls-dpl package.
This avoids compile issue when host system doesn't have
the dtc tool.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:58 +02:00
Yangbo Lu
7016dd48f1 layerscape: add ls1012afrwy support and drop ls1012afrdm
ls1012afrdm was no longer supported in NXP Layerscape SDK.
Instead a new board ls1012afrwy was introduced in LSDK.
This patch is to drop ls1012afrdm and add ls1012afrwy support.
Since only 2MB NOR flash could be used, we just put u-boot
and firmware on NOR flash, and put kernel/dtb/rootfs on SD
card.

The Layerscape FRWY-LS1012A board is an ultra-low-cost
development platform for LS1012A Series Communication
Processors built on Arm Cortex-A53. This tool refines the
FRDM-LS1012A with more features for a better hands-on experience
for IoT, edge computing, and various advanced embedded
applications. Features include easy access to processor I/O,
low-power operation, micro SD card storage, an M2 connector, a
small form factor, and expansion board options via mikroBUS Click
Module. The MicroBUS Module provides easy expansion via hundreds
of powerful modules supporting sensors, actuators, memories,
and displays.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:57 +02:00
Yangbo Lu
eb684205e5 layerscape: add SD card boot support
NOR/QSPI Flash on Layerscape board only has limited 64MB memory size.
Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr)
could support SD card boot, we added SD boot support for them to put
all things on SD card to meet large memory requirement.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:57 +02:00
Yangbo Lu
f0ec7bd27d layerscape: add armv7 subtarget and ls1021atwr board support
The NXP TWR-LS1021A module is a development system based
on the QorIQ LS1021A processor.
- This feature-rich, high-performance processor module can
  be used standalone or as part of an assembled Tower System
  development platform.
- Incorporating dual Arm Cortex-A7 cores running up to 1 GHz,
  the TWR-LS1021A delivers an outstanding level of performance.
- The TWR-LS1021A offers HDMI, SATA3 and USB3 connectors as
  well as a complete Linux software developer's package.
- The module provides a comprehensive level of security that
  includes support for secure boot, Trust Architecture and
  tamper detection in both standby and active power modes,
  safeguarding the device from manufacture to deployment.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:57 +02:00
Yangbo Lu
32bb763e45 layerscape: update ls-ppa to LSDK-18.06
This patch is to update ls-ppa to LSDK-18.06 release
and to rework ls-ppa makefile to make it more readable.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:56 +02:00
Yangbo Lu
89c4ed57b7 layerscape: update ls-rcw to LSDK-18.06
The rcw source code had been migrated to codeaurora
for LSDK-18.06 release and the future release. The
source code had also involved ls1012ardb/ls1012afrdm/
ls1088ardb/ls2088ardb rcw, so we updated ls-rcw to
LSDK-18.06, reworked the makefile and dropped ls-rcw-bin
package in this patch. Also reworked ls-rcw patch to
adapt to the latest source code.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:56 +02:00
Yangbo Lu
984cf8d89d layerscape: update ppfe-firmware to LSDK-18.06
This patch is to update ppfe-firmware to LSDK-18.06 release.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:56 +02:00
Yangbo Lu
c19f520686 layerscape: update ls-mc to LSDK-18.06
This patch is to update ls-mc to LSDK-18.06 release.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:56 +02:00
Yangbo Lu
e4fee592ea layerscape: update ls-dpl to LSDK-18.06
The dpl-examples source code had been migrated to
codeaurora for LSDK-18.06 release and the future
release. This patch is to update this package to
LSDK-18.06.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:56 +02:00
Yangbo Lu
56853409c4 layerscape: update fman-ucode to LSDK-18.06
Actually there was no change for fman-ucode in LSDK-18.06
just tagged with LSDK-18.06. This patch is to rework the
fman-ucode makefile to make it more readable, and to use
lsdk-1806 as the PKG_VERSION.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-09-22 21:20:55 +02:00
Hauke Mehrtens
a2488f3a24 linux-firmware: realtek: Add FW for rtl8192eu, rtl8723au and rtl8723bu
These devices are more or less supported by the kmod-rtl8xxxu driver.

Fixes: FS#1789
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-08-27 18:13:33 +02:00
Stijn Tintel
2c01425d2d ath10k-firmware: update both QCA988X CT variants
This fixes slow performance with 802.11w enabled.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-08-26 18:24:02 +02:00
Zoltan HERPAI
f4d3047671 firmware: intel-microcode: bump to 20180703
* New upstream microcode data file 20180703
    + Updated Microcodes:
      sig 0x000206d6, pf_mask 0x6d, 2018-05-08, rev 0x061d, size 18432
      sig 0x000206d7, pf_mask 0x6d, 2018-05-08, rev 0x0714, size 19456
      sig 0x000306e4, pf_mask 0xed, 2018-04-25, rev 0x042d, size 15360
      sig 0x000306e7, pf_mask 0xed, 2018-04-25, rev 0x0714, size 17408
      sig 0x000306f2, pf_mask 0x6f, 2018-04-20, rev 0x003d, size 33792
      sig 0x000306f4, pf_mask 0x80, 2018-04-20, rev 0x0012, size 17408
      sig 0x000406f1, pf_mask 0xef, 2018-04-19, rev 0xb00002e, size 28672
      sig 0x00050654, pf_mask 0xb7, 2018-05-15, rev 0x200004d, size 31744
      sig 0x00050665, pf_mask 0x10, 2018-04-20, rev 0xe00000a, size 18432
      sig 0x000706a1, pf_mask 0x01, 2017-12-26, rev 0x0022, size 73728
    + First batch of fixes for: Intel SA-00115, CVE-2018-3639, CVE-2018-3640
    + Implements IBRS/IBPB/STIPB support, Spectre-v2 mitigation
    + SSBD support (Spectre-v4 mitigation) and fix Spectre-v3a for:
      Sandybridge server, Ivy Bridge server, Haswell server, Skylake server,
      Broadwell server, a few HEDT Core i7/i9 models that are actually gimped
      server dies.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-08-09 01:00:06 +02:00
Massimo Tum
0a492ee39e ath10k: update QCA4019 firmware
With AVM Fritz!Box 4040 and OpenWrt 18.06 RC1 there are many kernel warnings
kern.warn kernel: [87771.917049] ath10k_ahb a000000.wifi: Invalid VHT mcs 15 peer stats
and there are disconnections when the connected clients are many, at the moment I tried with 16 clients on 2.4 GHz and 8 on 5 GHZ.

Firmware 10.4-3.5.3-00057 fixes these warnings and the problem of disconnections of some clients.

Signed-off-by: Massimo Tum <masnia@tiscali.it>
2018-07-30 10:43:35 +02:00
Christian Lamparter
df495305f3 ipq-wifi: add a note / reminder about upstreaming new board files
|Please send a mail with your device-specific board files upstream.
|You can find instructions and examples on the linux-wireless wiki:
|<https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-30 08:11:21 +02:00
Zoltan HERPAI
10e393262c firmware: amd64-microcode: update to 20180524
* New microcode update packages from AMD upstream:
    + New Microcodes:
      sig 0x00800f12, patch id 0x08001227, 2018-02-09
    + Updated Microcodes:
      sig 0x00600f12, patch id 0x0600063e, 2018-02-07
      sig 0x00600f20, patch id 0x06000852, 2018-02-06
  * Adds Spectre v2 (CVE-2017-5715) microcode-based mitigation support,
    plus other unspecified fixes/updates.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-07-07 12:23:00 +02:00
Christian Lamparter
82618062cf ipq40xx: add support for the ZyXEL NBG6617
This patch adds support for ZyXEL NBG6617

Hardware highlights:

SOC:    IPQ4018 / QCA Dakota
CPU:    Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
DRAM:   256 MiB DDR3L-1600/1866 Nanya NT5CC128M16IP-DI @ 537 MHz
NOR:    32 MiB Macronix MX25L25635F
ETH:    Qualcomm Atheros QCA8075 Gigabit Switch (4 x LAN, 1 x WAN)
USB:    1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC)
WLAN1:  Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
WLAN2:  Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
INPUT:  RESET Button, WIFI/Rfkill Togglebutton, WPS Button
LEDS:   Power, WAN, LAN 1-4, WLAN 2.4GHz, WLAN 5GHz, USB, WPS

Serial:
	WARNING: The serial port needs a TTL/RS-232 3.3v level converter!
	The Serial setting is 115200-8-N-1. The 1x4 .1" header comes
	pre-soldered. Pinout:
	  1. 3v3 (Label printed on the PCB), 2. RX, 3. GND, 4. TX

first install / debricking / restore stock:
 0. Have a PC running a tftp-server @ 192.168.1.99/24
 1. connect the PC to any LAN-Ports
 2. put the openwrt...-factory.bin (or V1.00(ABCT.X).bin for stock) file
    into the tftp-server root directory and rename it to just "ras.bin".
 3. power-cycle the router and hold down the the WPS button (for 30sek)
 4. Wait (for a long time - the serial console provides some progress
    reports. The u-boot says it best: "Please be patient".
 5. Once the power LED starts to flashes slowly and the USB + WPS LEDs
    flashes fast at the same time. You have to reboot the device and
    it should then come right up.

Installation via Web-UI:
 0. Connect a PC to the powered-on router. It will assign your PC a
    IP-address via DHCP
 1. Access the Web-UI at 192.168.1.1 (Default Passwort: 1234)
 2. Go to the "Expert Mode"
 3. Under "Maintenance", select "Firmware-Upgrade"
 4. Upload the OpenWRT factory image
 5. Wait for the Device to finish.
    It will reboot into OpenWRT without any additional actions needed.

To open the ZyXEL NBG6617:
 0. remove the four rubber feet glued on the backside
 1. remove the four philips screws and pry open the top cover
    (by applying force between the plastic top housing from the
    backside/lan-port side)

Access the real u-boot shell:
ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02"
When the device is starting up, the user can enter the the loader shell
by simply pressing a key within the 3 seconds once the following string
appears on the serial console:

|   Hit any key to stop autoboot:  3

The user is then dropped to a locked shell.

|NBG6617> HELP
|ATEN    x[,y]     set BootExtension Debug Flag (y=password)
|ATSE    x         show the seed of password generator
|ATSH              dump manufacturer related data in ROM
|ATRT    [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations)
|ATGO              boot up whole system
|ATUR    x         upgrade RAS image (filename)
|NBG6617>

In order to escape/unlock a password challenge has to be passed.
Note: the value is dynamic! you have to calculate your own!

First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env)
to get the challange value/seed.

|NBG6617> ATSE NBG6617
|012345678901

This seed/value can be converted to the password with the help of this
bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors):

- tool.sh -
ror32() {
  echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) ))
}
v="0x$1"
a="0x${v:2:6}"
b=$(( $a + 0x10F0A563))
c=$(( 0x${v:12:14} & 7 ))
p=$(( $(ror32 $b $c) ^ $a ))
printf "ATEN 1,%X\n" $p
- end of tool.sh -

|# bash ./tool.sh 012345678901
|
|ATEN 1,879C711

copy and paste the result into the shell to unlock zloader.

|NBG6617> ATEN 1,0046B0017430

If the entered code was correct the shell will change to
use the ATGU command to enter the real u-boot shell.

|NBG6617> ATGU
|NBG6617#

Co-authored-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
2018-06-26 08:57:26 +02:00
Magnus Frühling
4b280ad91a ipq40xx: add support for ZyXEL WRE6606
Specifications:
SOC:	Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core
RAM:	128 MB Nanya NT5CC64M16GP-DI
FLASH:	16 MiB Macronix MX25L12845EMI-12G
ETH:	Qualcomm QCA8072
WLAN1:  Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2
WLAN2:  Qualcomm Atheros QCA4018 5GHz 802.11n/ac W2 2x2
INPUT:  WPS, Mode-toggle-switch
LED:	Power, WLAN 2.4GHz, WLAN 5GHz, LAN, WPS
        (LAN not controllable by software)
        (WLAN each green / red)
SERIAL:	Header next to eth-phy.
        VCC, TX, GND, RX (Square hole is VCC)
        The Serial setting is 115200-8-N-1.

Tested and working:
 - Ethernet (Correct MAC-address)
 - 2.4 GHz WiFi (Correct MAC-address)
 - 5 GHz WiFi (Correct MAC-address)
 - Factory installation from tftp
 - OpenWRT sysupgrade
 - LEDs
 - WPS Button

Not Working:
 - Mode-toggle-switch

Install via TFTP:

Connect to the devices serial. Hit Enter-Key in bootloader to stop
autobooting. Command `tftpboot` will pull an initramfs image named
`C0A86302.img` from a tftp server at `192.168.99.08/24`.
After successfull transfer, boot the image with `bootm`.

To persistently write the firmware, flash an openwrt sysupgrade image
from inside the initramfs, for example transfer
via `scp <sysupgrade> root@192.168.1.1:/tmp` and flash on the device
with `sysupgrade -n /tmp/<sysupgrade>`.

append-cmdline patch taken from chunkeeys work on the NBG6617.

Signed-off-by: Magnus Frühling <skorpy@frankfurt.ccc.de>
Co-authored-by: David Bauer <mail@david-bauer.net>
Co-authored-by: Christian Lamparter <chunkeey@googlemail.com>
2018-06-18 18:21:20 +02:00
Daniel Golle
037ef13a16 brcm2708: move wifi calibration EEPROMs out of base-files
Ship EEPROM blobs for specific supported board only and don't have them
lurking around in our source tree but rather download them from
@github/RPi-Distro/firmware-nonfree upstream.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-14 18:15:33 +02:00
Daniel Golle
2826471254 linux-firmware: add firmware for BCM43455 SDIO wlan found on RPi3B+
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-14 13:54:17 +02:00
Rosen Penev
e191c7ee79 ath10k-firmware: Fix two more typos
Actually tested with a local build instead of with scp'ing the firmware.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-05-30 06:33:19 +02:00
Rosen Penev
d0fbe1956b ath10k-firmware: Fix typo in last commit
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-05-27 19:44:43 +02:00
Rosen Penev
27eab4fa57 ath10k-firmware: Fix QCA6174 support
Currently when installing the firmware, a bunch of files and directories
that the ath10k driver does not look for are created.

The package now installs firmware for both hw 2.1 and 3.0 devices.
2.1 is abandonware but may be useful to keep.

3.0 firmware was tested on a Killer 1535 to be relatively stable with
802.11w disabled. 802.11w causes multiple firmware crashes but that's true
of other ath10k firmwares as well.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-05-27 08:16:45 +02:00
Hauke Mehrtens
56a03e4343 ath10k-firmware: Fix mirror hash sum
This now matches what was generated locally on my PC and the file on the
mirror server.

Fixes: 349fe46103 ("ath10k-firmware: Update QCA988X firmware to the latest version")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-05-21 13:53:59 +02:00
Robert Marko
6390f27c2e ath3k: Add firmware support for QCA Rome
Add needed firmware for newer QCA Rome Bluetooth family.
This enables use of bluetooth with ath3k driver on QCA9377/9378 devices.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2018-05-18 08:58:08 +02:00
Timo Sigurdsson
349fe46103 ath10k-firmware: Update QCA988X firmware to the latest version
This patch updates the QCA988X firmware to the latest revision
  firmware-5.bin_10.2.4-1.0-00037
found in the ath10k-firmware and linux-firmware repositories.

Tested on TP-Link Archer C7 v2 (ar71xx).

Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
2018-05-18 08:49:15 +02:00
David Woodhouse
4424a9ff20 linux-firmware: Add firmware for usb-serial-ti-usb
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2018-05-15 06:39:46 +02:00
Sven Eckelmann
e6bd568051 ipq-wifi: drop custom board-2.bins
The BDFs for all boards were upstreamed to the ath10k-firmware
repository and are now part of ath10k-firmware 2018-04-19.

We switched to the upstream board-2.bin, hence the files can be removed
here.

Keep the ipq-wifi package in case new boards are added. It might take
some time till board-2.bins send upstream are merged.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
2018-04-23 22:07:22 +02:00
Sven Eckelmann
23894524a5 firmware: ath10k-firmware: update to 2018-04-19
* introduces the BDFs in /lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin
  for:
  - 8devices Jalapeno
  - Asus RT-AC58U
  - AVM FRITZ!Box 4040
  - GL.iNet GL-B1300
  - Meraki MR33
  - Netgear EX6100v2
  - Netgear EX6150v2
  - OpenMesh A62
* introduces the BDFs in /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
  - OpenMesh A62
* adds new firmware for QCA6174 hw3.0
  - firmware-6.bin_RM.4.4.1.c1-00038-QCARMSWP-1
  - firmware-6.bin_RM.4.4.1.c1-00041-QCARMSWP-1
* various undocumented BDF updates to:
  - QCA4019 hw1.0:
    + bus=ahb,bmi-chip-id=0,bmi-board-id=16
    + bus=ahb,bmi-chip-id=0,bmi-board-id=17
    + bus=ahb,bmi-chip-id=0,bmi-board-id=19
    + bus=ahb,bmi-chip-id=0,bmi-board-id=20
    + bus=ahb,bmi-chip-id=0,bmi-board-id=21
    + bus=ahb,bmi-chip-id=0,bmi-board-id=29
    + bus=ahb,bmi-chip-id=0,bmi-board-id=30
  - QCA9888 hw2.0:
    + bus=pci,bmi-chip-id=0,bmi-board-id=16
    + bus=pci,bmi-chip-id=0,bmi-board-id=17
    + bus=pci,bmi-chip-id=0,bmi-board-id=18
    + bus=pci,bmi-chip-id=0,bmi-board-id=23
    + bus=pci,bmi-chip-id=0,bmi-board-id=24
    + bus=pci,bmi-chip-id=0,bmi-board-id=25
  - QCA9984 hw1.0:
    + bus=pci,bmi-chip-id=0,bmi-board-id=1
    + bus=pci,bmi-chip-id=0,bmi-board-id=3
    + bus=pci,bmi-chip-id=0,bmi-board-id=5
    + bus=pci,bmi-chip-id=0,bmi-board-id=6
    + bus=pci,bmi-chip-id=0,bmi-board-id=7
    + bus=pci,bmi-chip-id=0,bmi-board-id=8

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
2018-04-23 22:07:22 +02:00
Evgeniy Didin
36314c12c0 mac80211: add RedPine RS9113 module support
RedPine RS9113 wireless module requires rsi91x driver to be built
and linux-firmware/rsi/rs9113_wlan_qspi.rps to be installed.
Also we add patch for successful compilation of rsi91x driver.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
2018-04-18 23:56:55 +02:00