Commit Graph

9 Commits

Author SHA1 Message Date
Sander Vanheule
dae3927527 ath79: drop phy-mask property
The phy-mask property is no longer supported by the ag71xx-mdio driver,
so let's drop it.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-06-15 20:07:26 +02:00
Adrian Schmutzler
41cc7edc15 ath79: move dts-v1 statement to ath79.dtsi
The "/dts-v1/;" identifier is supposed to be present once at the
top of a device tree file after the includes have been processed.

In ath79, we therefore requested to have in the DTS files so far,
and omit it in the DTSI files. However, essentially the syntax of
the parent ath79.dtsi file already determines the DTS version, so
putting it into the DTS files is just a useless repetition.

Consequently, this patch puts the dts-v1 statement into the parent
ath79.dtsi, which is (indirectly) included by all DTS files. All
other occurences are removed.
Since the dts-v1 statement needs to be before any other definitions,
this also moves the includes to make sure the ath79.dtsi or its
descendants are always included first.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-25 23:26:34 +02:00
Adrian Schmutzler
a967ae9d14 ath79: remove redundant includes in DTS files
Many DTS files contain the same includes again that are already
present in the DTSI files they are derived from.

Remove those redundant includes in the DTS files.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-22 19:17:51 +01:00
Petr Štetiar
6ab138fa84 ath79: ubnt-bullet-m-xw: Remove eth1 disabled node
It's redundant as eth1 is disabled by default in ath79.dtsi.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-12-27 16:02:25 +01:00
Petr Štetiar
74f46d90be ath79: ubnt-bullet-m-xw: Move eth0 mtd-mac-address to the common include
It's same for Bullet and Nanostation so far, so let's hope it's going to
be the same for other boards sharing the same platform.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-12-27 16:02:25 +01:00
Petr Štetiar
6935d73851 ath79: ubnt-bullet-m-xw: Remove pll-data property from eth0 node
It's not necessary as it's already defined in ar934x.dtsi to:

  pll-data = <0x16000000 0x00000101 0x00001616>;

And in ar71xx it's currently set to the same values:

 #define AR934X_PLL_VAL_1000	0x16000000
 #define AR934X_PLL_VAL_100	0x00000101
 #define AR934X_PLL_VAL_10	0x00001616

And dumping the value from the airOS v6.1.7 has the same value:

  AR934X_PLL_ETH_XMII_CONTROL_REG 0x1805002C 0x101

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-12-27 16:02:24 +01:00
Mathias Kresin
8d6f128d39 ath79: add SoC or family compatible
Add missing SoC specific compatibles and/or inherit the family
compatibles like "ubnt,xm".

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-06 13:28:22 +01:00
Petr Štetiar
9f563267d2 ath79: ubnt-bullet-m-xw: Change DTS license to GPL-2.0-or-later OR MIT
Having MIT as alternative is sometimes preferred by upstream maintainers
and allows sharing that simple code with other projects. We don't really
want multiple DTS versions for the same device.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-29 13:10:38 +01:00
Petr Štetiar
db4b6535f8 ath79: Add support for Ubiquity Bullet M (XW)
CPU: AR9342 SoC
RAM:     64 MB DDR2
Flash:    8 MB NOR SPI
Ports:  100 MBit (24V PoE in)
WLAN: 2.4/5 GHz
UART:     1 UART on PCB marked as J1 with 115200 8N1 config
LEDs:       Power, Ethernet, 4x RSSI LEDs (orange, red, 2x green)
Buttons:    Reset

UART connection details

  .---------------------------------.
  |                                 |
[ETH]          J1                 [ANT]
  |    o VCC o RX o TX o GND        |
  `---------------------------------'

Flashing instructions

 A) Serial console, U-Boot and TFTP

   1. Connect to serial header J1 on the PCB
   2. Power on device and enter U-Boot console
   3. Set up TFTP server serving an OpenWrt initramfs build
   4. Load initramfs build using the command tftpboot in the U-Boot cli
   5. Boot the loaded image using the command bootm
   6. Copy squashfs OpenWrt sysupgrade build to the booted device
   7. Use mtd to write sysupgrade to partition "firmware"
   8. Reboot and enjoy

 B) Experimental factory image flashing over SSH from airOS v6.1.7

   1. You need to flash your UBNT M2HP with airOS v6.1.7 firmware
      no other airOS version is currently supported
   2. git clone https://github.com/true-systems/ubnt-bullet-m2hp-openwrt-flashing
   3. cd ubnt-bullet-m2hp-openwrt-flashing
   4. make flash-factory FW_OWRT=/path/to/your/openwrt-ath79-generic-ubnt_bullet-m-xw-squashfs-factory.bin

Tested only on Bullet M2HP.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-26 12:05:38 +01:00