Commit Graph

706 Commits

Author SHA1 Message Date
Scott Roberts
34e7d31983 packages/boot: bump arm-trusted-firmware-mvebu version
The current version of ATF does not support power off for SGMII
COMPHY.  Update to latest ATF to resolve this issue.

Signed-off-by: Scott Roberts <ttocsr@gmail.com>
2020-02-22 18:21:37 +01:00
Michal Cieslakiewicz
a09408fa57 uboot-envtools: ath79: add Netgear WNDR3700v2
Add Netgear WNDR3700v2 to the list of supported boards.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
[rebase, adjusted commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-04 12:23:48 +01:00
Roger Pueyo Centelles
51526bcf1e rbcfg: make package available for ath79
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2020-01-23 15:28:02 +01:00
Kimmo Vuorinen
a8723c48ad uboot-envtools: ath79: add support for glinet,gl-ar150
Add ubootenv uci config for GL.inet GL-AR150

Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com>
[commit title/message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-23 14:08:24 +01:00
Kimmo Vuorinen
dc6dfaac80 uboot-envtools: ar71xx: add support for gl-ar150/-domino/-mifi
Add ubootenv uci config for gl-ar150, gl-domino and gl-mifi

Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com>
[commit message/title facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-23 14:04:50 +01:00
Andrea Dalla Costa
5adca1cf2a uboot-oxnas: fix memory leak in tool mkox820crc
In function `main` add calls to `free` for the variable `executable`.
This is needed because the variable `executable` is allocated but
never freed. This cause a memory leak.

Signed-off-by: Andrea Dalla Costa <andrea@dallacosta.me>
2020-01-15 23:15:19 +01:00
Michal Cieslakiewicz
a736f39432 ath79: add support for Netgear WNDR4500 v3
This patch introduces support for Netgear WNDR4500v3. Router
is very similar to WNDR4300v2 and is based on the same PCB.

Information gathered from various Internet sources (including
https://patchwork.ozlabs.org/patch/809227/) shows following
differences to WNDR4300v2:

 * two USB 2.0 ports with separate LEDs
 * USB LEDs soldered to secondary pads
 * WPS and RFKILL buttons soldered to secondary pads
 * described as N900 device with 3x3:3 MIMO for 2.4GHz radio
 * power supply requirement is DC 12V 2.5A
 * vendor HW ID suffix differs in one digit
 * bigger chassis

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
2020-01-15 20:56:05 +01:00
Michal Cieslakiewicz
37a36a588a ath79: add support for Netgear WNDR4300 v2
This patch introduces support for Netgear WNDR4300v2.

Specification
=============
  * Description: Netgear WNDR4300 v2
  * Loader: U-boot
  * SOC: Qualcomm Atheros QCA9563 (775 MHz)
  * RAM: 128 MiB
  * Flash: 2 MiB SPI-NOR + 128 MiB SPI-NAND
	- NOR: U-boot binary: 256 KiB
	- NOR: U-boot environment: 64 KiB
	- NOR: ART Backup: 64 KiB
 	- NOR: Config: 64 KiB
	- NOR: Traffic Meter: 64 KiB
	- NOR: POT: 64 KiB
	- NOR: Reserved: 1408 KiB
	- NOR: ART: 64 KiB
	- NAND: Firmware: 25600 KiB (see notes for OpenWrt)
	- NAND: Language: 2048 KiB
	- NAND: mtdoops Crash Dump: 128 KiB
	- NAND: Reserved: 103296 KiB
  * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) (AR8337)
  * Wireless:
	- 2.4 GHz b/g/n (internal)
	- 5 GHz a/n (AR9580)
  * USB: yes, 1 x USB 2.0
  * Buttons:
	- Reset
	- WiFi (rfkill)
	- WPS
  * LEDs:
	- Power (amber/green)
	- WAN (amber/green)
	- WLAN 2G (green)
	- WLAN 5G (blue)
	- 4 x LAN (amber/green)
	- USB (green)
	- WPS (green)
  * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1
  * Power supply: DC 12V 1.5A
  * MAC addresses: LAN=WLAN2G on case label, WAN +1, WLAN5G +2

Important Notes
===============
0. NOR Flash (2 MiB) is not touched by OpenWrt installation.
1. NAND Flash (128 MiB) layout under OpenWrt is changed as follows:
   all space is split between 4 MiB kernel and 124 MiB UBI areas;
   vendor partitions (language and mtdoops) are removed; kernel space
   size can be further expanded if needed; maximum image size is set
   to 25600k for compatibility reasons and can also be increased.
2. CPU clock is 775 MHz, not 750 MHz.
3. 5 GHz wireless radio chip is Atheros AR9580-AR1A with bogus PCI
   device ID 0xabcd. For ath9k driver to load successfully, this is
   overriden in DTS with correct value for this chip, 0x0033.
4. RFKILL button is wired to AR9580 pin 9 which is normally disabled
   by chip definition in ath9k code (0x0000F4FF gpio mask). Therefore
   'qca,gpio-mask=<0xf6ff>' hack must be used for button to work
   properly.
5. USB port is always on, no GPIO for 5V power control has been
   identified.

Installation
============
  * TFTP recovery
  * TFTP via U-boot prompt
  * sysupgrade
  * Web interface

Test build configuration
========================
CONFIG_TARGET_ath79=y
CONFIG_TARGET_ath79_nand=y
CONFIG_TARGET_ath79_nand_DEVICE_netgear_wndr4300-v2=y
CONFIG_ALL_KMODS=y
CONFIG_DEVEL=y
CONFIG_CCACHE=y
CONFIG_COLLECT_KERNEL_DEBUG=y
CONFIG_IMAGEOPT=y

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
2020-01-15 20:55:56 +01:00
Adrian Schmutzler
28fd4ac512 ixp4xx: remove unmaintained target
This target is still on kernel 4.9, and it looks like there is no
active maintainer for this target anymore.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-08 16:45:08 +01:00
Florian Fainelli
c715f71bce treewide: Remove self from MAINTAINER entries
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-23 13:18:04 -08:00
Karl Palsson
34466afb28 uboot-envtools: ath79: fix missing etactica eg200 support
Was inadvertantly missed from the inital forward port from ar71xx to
ath79.

Fixes: 1588114cf2 ("ath79: add etactica-eg200 support")
Signed-off-by: Karl Palsson <karlp@etactica.com>
[commit description/subject facelift]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-12-19 22:41:57 +01:00
Imran Khan
27d69d2561 uboot-envtools: check for config prior to append
In the rare event a pre-populated fw_env.config exists in the rootfs prior
to firstboot, calling fw_setenv after the system has initialised will
annihilate the devices environment due to two identical lines in
fw_env.config.

Check for existence prior to blind appendage.

Signed-off-by: Imran Khan <gururug@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[daniel@makrotopia.org: fixed patch format, improved grep, cosmetics]
2019-12-17 19:35:16 +02:00
Roman Bazalevsky
69fff339e9 sunxi: add support for FriendlyARM Nano PI NEO Air dev board
Hardware:

  Allwinner H3 upto 1.2GHz
  512MB DDR3 RAM
  8GB on-board eMMC - mountable, can be used as boot with custom boot.scr
  microSD-card slot
  WiFi 802.11n (AP6212A) - working
  Bluetooth (AP6212A) - not working for now
  Micro-USB OTG + 2*USB headers
  UART 3.3V - working
  GPIO/I2C/SPI 2.54mm headers

Standard sunxi SD-card installation procedure - copy image to SD card,
insert in into slot and boot. First time you will need UART adapter to
enable on-board wireless (or just build custom image with enabled WiFi).

To boot from eMMC:

  - boot from SD
  - copy SD image to emmc (dd bs=... if=.... of=/dev/mmcblk2)
  - mount eMMC boot partition and replace boot script on it
  - unmount, reboot

To use i2c, spi and more uarts - replace dtb on boot partition with
fixed one (use dtc or fdt-tools).

Signed-off-by: Roman Bazalevsky <rvb@rvb.name>
[rebase onto device name consolidation patches]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-13 12:20:09 +01:00
Adrian Schmutzler
a4cdb537b1 sunxi: use vendor_device scheme for device definitions
This changes device definition to resemble the vendor_device scheme
already present for the majority of device compatible strings.

By doing this, we achieve several advantages at once:
- Image names and node names are more consistent with other targets.
- SUPPORTED_DEVICES can be set automatically for all but two cases.
- Image names and node names are in line with DEVICE_TITLEs.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-13 12:19:44 +01:00
Piotr Dymacz
5d2a900163 uboot-envtools: ath79: add support for YunCore XD4200 and A782
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2019-11-25 17:32:46 +01:00
Vladimir Vid
e7a96acf1b uboot-mvebu: add uDPU board
* add u-boot support for uDPU
* add line to copy u-boot binary to STAGING_DIR_IMAGE, this can later be used
as BL33 variable required for ATF build
* add patch to increase max gunzip size in mvebu_armada-37xx.h which is
required for booting the itb recovery images

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
2019-11-21 07:32:41 +01:00
Vladimir Vid
52459ebf77 packages/boot: add arm-trusted-firmware-mvebu and initial uDPU support
ATF mvebu is required for building a functional bootloader for A7K/A8K and
A37xx platforms. uDPU device is added as the first target.

A3700 platform has a wide range of settings which can be used per device, so
options are defined under the Device sections.

Platform also required WTP (recovery) tools and mv-ddr package for the DDR
topology configuration. 32-bit cross compiler is used for building the WTMI
image.

After the build, flash-image.bin can be used with the bubt command from the
u-boot shell to flash the new version of u-boot.

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
2019-11-21 07:32:09 +01:00
Andre Heider
c5d121654e omap: support booting off different mmc devices
Tested with installing to/sysupgrading from sd and emmc on boneblack.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2019-11-20 10:46:19 +01:00
Andre Heider
1f37b2226e omap: switch from uEnv.txt to generic distro booting
Which makes supporting different boot devices easy.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2019-11-20 10:46:19 +01:00
Andre Heider
b69df1eee0 omap: update uboot to 2019.10
All patches have been dropped, they're either redundant (e.g. due to the
new and unset CONFIG_SPL_FAT_WRITE), break compilation (thumb hacks) or
have been applied upstream.

The defconfig for am335x_boneblack has been removed upstream [0], so use
am335x_evm for boneblack too.

Size changes (before, after, file):

ti_am335x-evm and ti_am335x-bone-black:
  79804 110832 MLO
 623836 756148 u-boot.img

ti_omap3-beagle:
  54148  57708 MLO
 496272 665728 u-boot.img

ti_omap4-panda:
  39356  40204 MLO
 284648 366672 u-boot.img

Tested on boneblack, which has the biggest spl size increase. The beagle and
panda spl sizes seem reasonable to not break booting.

[0] 8fa7f65dd0

Signed-off-by: Andre Heider <a.heider@gmail.com>
2019-11-20 10:46:19 +01:00
Paul Blazejowski
7e623c3128 ath79: add support for Netgear WNDR3700v4
This patch adds ath79 support for Netgear WNDR3700v4.
Router was previously supported by ar71xx target only.
Note: device requires 'ar934x-nand' driver in kernel.

Specification
=============
  * Description: Netgear WNDR3700v4
  * Loader: U-boot
  * SOC: Atheros AR9344 (560 MHz)
  * RAM: 128 MiB
  * Flash: 128 MiB (NAND)
    - U-boot binary: 256 KiB
    - U-boot environment: 256 KiB
    - ART: 256 KiB
    - POT: 512 KiB
    - Language: 2 MiB
    - Config: 512 KiB
    - Traffic Meter: 3 MiB
    - Firmware: 25 MiB
    - ART Backup: 256 KiB
    - Reserved: 96 MiB
  * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) (AR8327)
  * Wireless:
    - 2.4 GHz b/g/n (internal)
    - 5 GHz a/n (AR9580)
  * USB: yes, 1 x USB 2.0
  * Buttons:
    - Reset
    - WiFi (rfkill)
    - WPS
  * LEDs:
    - Power (amber/green)
    - WAN (amber/green)
    - WLAN 2G (green)
    - WLAN 5G (blue)
    - 4 x LAN (amber/green)
    - USB (green)
    - WPS (amber/green)
  * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1
  * Power supply: DC 12V 2.5A
  * MAC addresses: LAN=WLAN2G on case label, WAN +1, WLAN5G +2

Installation
============
  * TFTP recovery
  * TFTP via U-boot prompt
  * sysupgrade
  * Web interface

Note about partitioning: firmware partition offset (0x6c0000) is
hardcoded into vendor's u-boot, so this partition cannot be moved
and resized to include Netgear-specific flash areas (pot, language,
config, traffic_meter) not used by OpenWrt.

Test build configuration
========================
CONFIG_TARGET_ath79=y
CONFIG_TARGET_ath79_nand=y
CONFIG_TARGET_ath79_nand_DEVICE_netgear_wndr3700-v4=y
CONFIG_ALL_KMODS=y
CONFIG_DEVEL=y
CONFIG_CCACHE=y
CONFIG_COLLECT_KERNEL_DEBUG=y
CONFIG_IMAGEOPT=y

Signed-off-by: Paul Blazejowski <paulb@blazebox.homeip.net>
2019-11-14 23:14:15 +01:00
Jeff Kletsky
b496a2294c ath79: GL-AR750S: provide NAND support; increase kernel to 4 MB
The GL.iNet GL-AR750S has been supported by the ar71xx and ath79
platforms with access to its 16 MB NOR flash, but not its 128 MB
SPI NAND flash.

This commit provides support for the NAND through the upstream
SPI-NAND framework.

At this time, the OEM U-Boot appears to only support loading the
kernel from NOR. This configuration is preserved as this time,
with the glinet,gl-ar750s-nand name reserved for a potential,
future, NAND-only boot.

The family of GL-AR750S devices on the ath79 platform now includes:

  * glinet,gl-ar750m-nor-nand   "nand" target
  * glinet,gl-ar750m-nor        "nand" target (NAND-aware)

NB: This commit increases the kernel size from 2 MB to 4 MB

"Force-less" sysupgrade is presently supported from the current
versions of following NOR-based firmwre images to the version of
glinet,gl-ar750s-nor firmware produced by this commit:

  * glinet,gl-ar750s     -- OpenWrt 19.07 ar71xx
  * glinet,gl-ar750s     -- OpenWrt 19.07 ath79

Users who have sucessfully upgraded to glinet,gl-ar750m-nor may then
flash glinet,gl-ar750m-nor-nand with sysupgrade to transtion to the
NAND-based variant.

Other upgrades to these images, including directly to the NAND-based
glinet,gl-ar750s-nor-nand firmware, can be accomplished through U-Boot.

NB: See "ath79: restrict GL-AR750S kernel build-size to 2 MB" which
enables flashing of NAND factory.img with the current GL-iNet U-Boot,
"U-Boot 1.1.4-gcf378d80-dirty (Aug 16 2018 - 07:51:15)"

The GL-AR750S OEM U-Boot allows upload and flashing of either NOR
firmware (sysupgrade.bin) or NAND firmware (factory.img) through its
HTTP-based GUI. Serial connectivity is not required.

The glinet,gl-ar750s-nor and glinet,gl-ar750s-nor-nand images
generated after this commit flash each other directly.

This commit changes the control of the USB VBUS to gpio-hog from
regulator-fixed introduced by commit 0f6b944c92. This reduces the
compressed kernel size by ~14 kB, with no apparent loss of
functionality. No other ath79-nand boards are using regulator-fixed
at this time.

Note: mtd_get_mac_binary art 0x5006 does not return the proper MAC
and the GL.iNet source indicates that only the 0x0 offset is valid

The ar71xx targets are unmodified.

Cc: Alexander Wördekemper <alexwoerde@web.de>

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
2019-11-14 14:38:58 +08:00
Jeff Kletsky
b591cabd39 ath79: add GL.iNet GL-AR300M16 as NOR-only board
The GL.iNet GL-AR300M series of devices includes variants without NAND
and only the 16 MB NOR flash. These include the GL-AR300M16 and the
GL-AR300M-Lite (already with its own board name).

This board-name addition provides disambiguation from the NAND-bearing
GL-AR300M devices, both for OpenWrt code and for end users.

Kernel and firmware support for NAND and UBI will add ~320 kB to the
overall firmware size at this time. This NOR-only option continues to
provide more compact firmware for both the GL-AR300M16 as well as
those who wish to use it as an alternate or primary, NOR-resident
firmware on the GL-AR300M.

The ar71xx targets are unmodified.

Installation
------------

Install through OEM U-Boot (HTTP-based) or `sysupgrade --force` when
booted from NOR and running OEM or OpenWrt, NOR-based firmware.

As one of the intentions is disambiguation from NAND-bearing units,
users who have flashed this firmware onto a device with NAND would
need to use U-Boot or `sysupgrade --force` to flash firmware that
again supports NAND.

There are no additional SUPPORTED_DEVICES as it is not possible to
determine if a device does or does not have NAND based on
either the OEM's or OpenWrt's board names prior to this patch.

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
2019-11-14 14:38:58 +08:00
Piotr Dymacz
10bcf1eb40 uboot-envtools: ramips: add support for ALFA Network Quad-E4G
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2019-11-14 01:38:01 +01:00
Piotr Dymacz
3cfea3a321 uboot-envtools: ramips: add support for ALFA Network R36M-E4G
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2019-11-13 21:45:31 +01:00
Hauke Mehrtens
b7b2be0b26 uboot-envtools: Add TARGET_LDFLAGS to fix PIE and RELRO
Forward the OpenWrt TARGET_LDFLAGS to the linker of the fw_printenv tool.
In addition also use the more standard make invocation script.
With this change the fw_printenv tool is built with PIE and Full RELRO
support when activated globally in OpenWrt.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2019-11-09 14:33:42 +01:00
Michael Heimpold
593d02a9be uboot-mxs: bump to v2019.10
Also update the U-Boot BSP patch for I2SE Duckbill devices.

Run tested on I2SE Duckbill and Olimex OLinuXino Maxi boards.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2019-11-09 12:56:25 +01:00
Michal Cieslakiewicz
1105290049 ar71xx: update uboot-envtools for Netgear WNR routers
Boards added: WNR1000v2, WNR2000v3, WNR2200, WNR612v2, WNDR4300.
Boards changed: WNDR3700 (u-boot env size is 2 sectors not 1).

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
2019-11-08 14:48:52 +01:00
Michal Cieslakiewicz
d47b687006 ath79: update uboot-envtools for Netgear WNR routers
Boards added: WNR1000v2, WNR2000v3, WNR612v2, WNDR3700.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
2019-11-08 14:48:48 +01:00
Michal Cieslakiewicz
9b6f89c37f ath79: add support for Netgear WNDR4300
This patch adds ath79 support for Netgear WNDR4300.
Router was previously supported by ar71xx target only.
Note: device requires 'ar934x-nand' driver in kernel.

Specification
=============
  * Description: Netgear WNDR4300
  * Loader: U-boot
  * SOC: Atheros AR9344 (560 MHz)
  * RAM: 128 MiB
  * Flash: 128 MiB (NAND)
	- U-boot binary: 256 KiB
	- U-boot environment: 256 KiB
	- ART: 256 KiB
	- POT: 512 KiB
	- Language: 2 MiB
	- Config: 512 KiB
	- Traffic Meter: 3 MiB
	- Firmware: 25 MiB
	- ART Backup: 256 KiB
	- Reserved: 96 MiB
  * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) (AR8327)
  * Wireless:
	- 2.4 GHz b/g/n (internal)
	- 5 GHz a/n (AR9580)
  * USB: yes, 1 x USB 2.0
  * Buttons:
	- Reset
	- WiFi (rfkill)
	- WPS
  * LEDs:
	- Power (amber/green)
	- WAN (amber/green)
	- WLAN 2G (green)
	- WLAN 5G (blue)
	- 4 x LAN (amber/green)
	- USB (green)
	- WPS (amber/green)
  * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1
  * Power supply: DC 12V 2.5A
  * MAC addresses: LAN=WLAN2G on case label, WAN +1, WLAN5G +2

Installation
============
  * TFTP recovery
  * TFTP via U-boot prompt
  * sysupgrade
  * Web interface

Note about partitioning: firmware partition offset (0x6c0000) is
hardcoded into vendor's u-boot, so this partition cannot be moved
and resized to include Netgear-specific flash areas (pot, language,
config, traffic_meter) not used by OpenWrt.

Test build configuration
========================
CONFIG_TARGET_ath79=y
CONFIG_TARGET_ath79_nand=y
CONFIG_TARGET_ath79_nand_DEVICE_netgear_wndr4300=y
CONFIG_ALL_KMODS=y
CONFIG_DEVEL=y
CONFIG_CCACHE=y
CONFIG_COLLECT_KERNEL_DEBUG=y
CONFIG_IMAGEOPT=y

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
2019-11-02 19:29:30 +01:00
Vladimir Vid
b2fdfe0727 uboot-mvebu: add support for Macronix mx25u12835f flash
Some of A3700 boards use mx25u12835f, specifically uDPU and ESPRESSObin v7.

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
2019-11-01 21:19:40 +01:00
Michal Cieslakiewicz
f85d56bb03 ath79: add support for Netgear WNR2200
This patch adds ath79 support for Netgear WNR2200.
Router was previously supported by ar71xx target only (8 MiB variant).
Netgear WNR2200 has two flash versions - 8MiB sold in EU, US etc. and
16 MiB for Russia and China markets. Apart from flash size both variants
share the same hardware specification.

Specification
=============
  * Description: Netgear WNR2200
  * Loader: U-boot
  * SOC: Atheros AR7241 (360 MHz)
  * RAM: 64 MiB
  * Flash: 8 MiB or 16 MiB (SPI NOR)
	- U-boot binary: 256 KiB
	- U-boot environment: 64 KiB
	- Firmware: 7808 KiB or 16000 KiB
	- ART: 64 KiB
  * Ethernet: 4 x 10/100 LAN + 1 x 10/100 WAN
  * Wireless: 2.4 GHz b/g/n (Atheros AR9287)
  * USB: yes, 1 x USB 2.0
  * Buttons:
	- Reset
	- WiFi (rfkill)
	- WPS
  * LEDs:
	- Power (amber/green)
	- WAN (amber/green)
	- WLAN (blue)
	- 4 x LAN (amber/green)
	- WPS (green)
  * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1
  * Power supply: DC 12V 1.5A
  * MAC addresses: LAN on case label, WAN +1, WLAN +2

Installation
============
  * TFTP recovery
  * TFTP via U-boot prompt
  * sysupgrade
  * Web interface

Test build configuration
========================
CONFIG_TARGET_ath79=y
CONFIG_TARGET_ath79_generic=y
CONFIG_TARGET_ath79_generic_DEVICE_netgear_wnr2200-8m=y
CONFIG_ALL_KMODS=y
CONFIG_DEVEL=y
CONFIG_CCACHE=y
CONFIG_COLLECT_KERNEL_DEBUG=y
CONFIG_IMAGEOPT=y
CONFIG_KERNEL_DEBUG_INFO=y
CONFIG_KERNEL_DEBUG_KERNEL=y

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
2019-11-01 21:14:55 +01:00
Jeff Kletsky
29b4f08405 ath79: uboot-envtools: Add GL-AR300M-Lite
Add the GL.iNet GL-AR300M-Lite to the list of supported boards.

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
2019-10-24 23:06:41 +02:00
David Bauer
7f187229a8 ipq40xx: add support for AVM FRITZ!Repeater 1200
Hardware
--------
SoC:   Qualcomm IPQ4019
RAM:   256M DDR3
FLASH: 128M NAND
WiFi:  2T2R IPQ4019 bgn
       2T2R IPQ4019 a/n/ac
ETH:   Atheros AR8033 RGMII PHY
BTN:   1x Connect (WPS)
LED:   Power (green/red/yellow)

Installation
------------

1. Grab the uboot for the Device from the 'u-boot-fritz1200'
   subdirectory. Place it in the same directory as the 'eva_ramboot.py'
   script. It is located in the 'scripts/flashing' subdirectory of the
   OpenWRT tree.

2. Assign yourself the IP address 192.168.178.10/24. Connect your
   Computer to one of the boxes LAN ports.

3. Connect Power to the Box. As soon as the LAN port of your computer
   shows link, load the U-Boot to the box using following command.

   > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin

4. The U-Boot will now start. Now assign yourself the IP address
   192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
   server root directory and rename it to 'FRITZ1200.bin'.

5. The Box will now boot OpenWRT from RAM. This can take up to two
   minutes.

6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
   scp. SSH into the Box and first write the Bootloader to both previous
   kernel partitions.

   > mtd write /path/to/uboot-fritz1200.bin uboot0
   > mtd write /path/to/uboot-fritz1200.bin uboot1

7. Remove the AVM filesystem partitions to make room for our kernel +
   rootfs + overlayfs.

   > ubirmvol /dev/ubi0 --name=avm_filesys_0
   > ubirmvol /dev/ubi0 --name=avm_filesys_1

8. Flash OpenWRT peristently using sysupgrade.

   > sysupgrade -n /path/to/openwrt-sysupgrade.bin

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-23 01:17:28 +02:00
David Bauer
36f43b61a7 uboot-fritz4040: update to latest HEAD
f92be9d add support for AVM FRITZ!Repeater 1200
d651302 enable support for Atheros AR8033 PHY
e4c857c add machtype override hack

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-23 01:17:28 +02:00
Tim Harvey
f4f483f3ff uboot-envtools: remove erasesize from MMC config
Erasesize doesn't belong in the u-boot env config for block devices as it is
known to be 512 byte aligned.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2019-10-21 12:28:03 +02:00
Sungbo Eo
60acddc960 uboot-oxnas: remove unnecessary execute permission bit
.c files do not need to be executable. 644 is enough.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2019-10-12 23:37:00 +02:00
Felix Fietkau
9f07d1519c grub2: fix a build regression on non-linux systems
Merge an upstream commit to correct a missing rename in generic code

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-10-02 13:16:21 +02:00
David Bauer
af63436d2d uboot-fritz4040: update to 2019-09-07
572ff7f fritzcreator: actually add checksum spacer
6edce1a fritzcreator: replace obscure padding generation with something more portable
2ff189f add ASUS RT-AC58U "easy install" factory u-boot shim
b91f9c2 readd spi-nand support
486ae53 improve cmd_sysupgrade
b0933f1 replace sstrip with strip
882e48a do not include generated files into git
0c5aa5f fix bugs in ipq40xx_cdp.c

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-09-25 22:42:03 +02:00
Hal Martin
3819c1638a sunxi: Add support for Banana Pi M2 Ultra
CPU: Allwinner R40 Quad-Core Cortex-A7 @ 1.2GHz
GPU: Mali 400 MP2
Memory: 2GB DDR3 onboard (shared with GPU)
Onboard: Storage microSD card slot
Onboard: Storage 8GB eMMC
Onboard: Network 10/100/1000M Ethernet RJ45
Onboard: Network WiFi 802.11b/g/n 1x1 (AMPAK AP6212; brcmfmac)
Onboard header: SPI, I2C, GPIO, UART
USB: Two USB 2.0 Host, One USB 2.0 OTG

Known issues:
- WiFi doesn't work
- eMMC not supported

Signed-off-by: Hal Martin <hal.martin@gmail.com>
2019-09-21 01:12:35 +02:00
Yousong Zhou
40e3f660c1 uboot-fritz4040: build with ipq40xx "generic" subtarget
Fixes: 853e4dd3 ("ipqx0xx: add Generic subtarget")
Ref: https://forum.openwrt.org/t/ipq40xx-snapshot-not-updated-since-22nd-august/44126
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-09-06 08:33:30 +00:00
Hauke Mehrtens
1184e1f2b6 uboot-envtools: Update to U-Boot version 2019.07
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-09-04 22:35:22 +02:00
Tomasz Maciej Nowak
3fa0f32a68 grub2: bump to 2.04
* GCC 8 and 9 support.
* Gnulib integration overhaul.
* RISC-V support.
* Xen PVH support.
* Native UEFI secure boot support.
* UEFI TPM driver.
* New IEEE 1275 obdisk driver.
* Btrfs RAID 5 and RIAD 6 support.
* bootin from F2FS support.
* PARTUUID support.
* VLAN support.
* Native DHCP support.
* Many ARM and ARM64 fixes.
* Many SPARC fixes.
* Many IEEE 1275 fixes.
* ...and tons of other fixes and cleanups...

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-09-01 18:38:05 +02:00
Luis Araneda
5ca243153b uboot-zynq: update to 2019.07
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-09-01 18:38:05 +02:00
Vladimir Vid
7dff6a8c89 mvebu: uDPU: add sysupgrade support
This patch adds sysupgrade, uboot-env and networking support
for Methode uDPU device.

Device features 4 partitions:

-----------------------------------------
|  boot   | recovery  | rootfs |  misc  |
| (ext4)  |  (ext4)   | (fsf2) | (f2fs) |
_________________________________________

Idea was to use f2fs only but the u-boot currently lacks support
so first 2 partition are ext4 to be u-boot readable, and this was
a reason why custom build and sysupgrade sections were required.

On the sysupgrade, boot and rootfs partitions are updated, firmare
image and user configuration is saved on the misc partition and if
the upgrade was successfull, recovery partition will be updated on
after the reboot from preinit script. If the sysupgrade fails for any
reason, device will fallback to recovery initramfs image.

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
2019-08-24 23:11:15 +02:00
Sandeep Sheriker M
0b7c66c93b at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfig
Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
2019-08-17 23:08:44 +02:00
Sandeep Sheriker M
8ff5d69734 at91bootstrap: add support for at91sam9x5ek
Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
2019-08-17 23:08:38 +02:00
Sandeep Sheriker M
f9c7ca84bc at91bootstrap: bump v3.8.10 to v3.8.12
Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
2019-08-17 23:08:31 +02:00
Sandeep Sheriker M
b39dc6e550 uboot-at91: fix -Wformat-security
add patch to fix -Wformat-security warnings.

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
2019-08-17 23:08:10 +02:00
Sandeep Sheriker M
adc69febc0 uboot-at91: changed som1 ek default defconfigs
replaced som1 ek spi flash with qspi defconfig and mmc with mmc1
defconfig.

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
2019-08-17 23:08:05 +02:00